UTStarcom PPC-6700 Manual de usuario
| 1
Pocket PC Phone Battery
Q.1 What’s in the Box?
AC Adapter
USB Cable
Headset USB Cradle
Quick Start Guide
Getting Started CD
/ User Manual CD
2 |
Device view
1 2
7
8 9 10
11
12
3
4
5
6
13 14
17
16
15
18
19
20
21 22
23
24 25 26 27
28
| 3
1POWER/Backlight
Button
Press to turn your device on/off. Press and hold to turn the backlight
on/off.
2 MiniSD Card Slot Insert a storage card (miniSD card) for storing data.
3 Voice Recorder Press to record a voice note.
4 Volume Press up or down to adjust the volume.
5 Internet Explorer Press to quickly launch Internet Explorer.
6 Infrared Port Lets you exchange file(s) or data with other devices wirelessly.
7 Antenna
8 Notification LED 1
Bi-color LED on the left side: Blue and Green for Bluetooth system
notification of powered-up and ready to transmit radio frequency
signal, and Wi-Fi status.
9 Speaker Listen to a phone call from here.
10 Notification LED 2
Bi-color LED on the right side: Green and Orange for CDMA standby,
SMS message, CDMA network status, notification, battery charging
status.
11 Touch Screen Use to write, draw, or make a selection with the stylus.
12 Left SOFT KEY Press to perform the command shown in the label above the button.
13 START Button Press to open the Start menu.
14 OK Button Press to verify your data entries, or to exit the program in use.
15 Right SOFT KEY Press to perform the command shown in the label above the button.
16 TALK Button Press to answer an incoming call or to dial a number. Press and hold to
turn speakerphone on/off.
17 NAVIGATION Control
Press this multi-directional control up, down, left, or right to move
through menus, program instructions; carry out the selection by
pressing ENTER (the center button).
18 END Button Press to end a call.
19 Stylus and Stylus Slot Use the stylus to write, draw, or select items on the touch screen.
Device components
4 |
20 External Antenna
Connector
You can connect your device to an external antenna to utilize the
superior reception quality.
21 Camera Lens
The camera lens on your device supports two shoot modes: Wide-
angle mode (normal) and Macro mode (close-up). To change the shoot
mode, push the switch up for wide-angle mode ( ) or down for
macro mode ( ).
22 Flash Allows you to capture images even in a dark environment. To turn on
the flash, tap the Flash icon ( ) when in Camera mode.
23 Self-Portrait Mirror Position your device until this mirror reflects the image you want to
capture.
24 RESET Button With the stylus, press the Reset button to soft-reset your device.
25 Sync Connector Use this connector for synchronizing data or recharging the battery.
26 Earphone Jack Allows you to listen to audio media or use the phone’s hands-free kit.
27 Microphone Speak into the microphone when receiving or making a phone call or
voice recording.
28 CAMERA Button Press to launch the camera. Press again to take a picture.
Accessories
AC adapter Recharge the device battery.
USB cable Plug into the cradle or directly into the device to recharge the battery.
Stereo-wired headset with
volume control jog dial and
Send/End button
With volume control jog dial, and Send/End button. Pick up and hang
up incoming and outgoing calls.
USB cradle
Allows you to recharge your device and the second battery (if you
have purchased one), as well as using ActiveSync to synchronize data
between your device and the PC.
• To recharge the device (or battery), connect the cradle to the
electrical outlet.
• To synchronize, connect the cradle to the USB port on your PC.
| 5
The QWERTY keyboard
Your device provides you with a QWERTY keyboard, which is similar to a standard keyboard
on your PC. To use the hardware keyboard, slide the main screen rightward to reveal the
keyboard.
The QWERTY keyboard
Note: Once the keypad is revealed, the screen orientation changes from portrait to landscape.
You can do the following with the QWERTY keyboard:
• To type lowercase letters, press the keys using your thumbs or fingers.
• To use all uppercase letters, press first, then .
• To type a single uppercase letter, press , and then press the corresponding key.
• To enter a number or symbol (labeled on the top left of each key in red), press ,
then press the corresponding key.
• Press the Left/Right SOFT KEY ( ) to perform the command shown on the bottom of
the screen.
• Press to verify your data entries or exit the program in use.
• Press to open the Start menu.
• Press the arrow keys ( ) for directional movement.
• To choose a word that is being predicted, press to select. Then press to finish
the selection and add a space.
6 |
Q.2 Getting Your Device Ready
Install and charge the battery
New batteries are shipped partially charged. Before you can use your Pocket PC Phone,
you need to install and charge the battery. To install the battery, remove the battery cover
first, and then insert the battery by aligning the exposed copper part of the battery pack with
the protruding copper conductor. Then, gently push the battery into place, and replace the
battery cover.
Some batteries perform best after several full charge/discharge cycles. The time needed to
fully charge the battery is less than 4 hours. You can charge the battery by:
• Connecting your device directly to the electrical outlet via the AC Adapter.
• Plugging the device sync cable into the USB port on your PC.
• You can also charge the battery using the USB cradle (connecting to the electrical
outlet or your PC).
When your device is turned off, charging is indicated by a solid amber light on the LED
indicator. When your device is turned on, charging is indicated by a solid amber light on
the LED indicator as well as a charging icon ( ) on the device screen. A green light on
the LED indicator or a charged icon ( ) on the device screen indicates that charging is
complete.
When the battery power gets very low, your device screen displays a warning message.
When you see this, immediately save your data by synchronizing with your PC, or save your
data on a secondary storage card, and then turn off your device. Do not try to restart your
device until you have connected your device to an external power supply.
Turn on your device
Press POWER to turn on your device. When you turn on the device for the first time, you are
asked to complete a screen calibration process.
To turn off the device, press POWER again.
| 7
Q.3 Making a Call
Like a standard mobile phone, you can use your Pocket PC Phone to make, receive, and
keep track of calls and send SMS messages. You can also take notes while talking, and dial
directly from Contacts.
The Phone screen
From the Phone screen, you can access Call History, Speed
Dial, and Phone settings. To open the Phone screen:
• Use the stylus and tap Start > Phone.
-or-
• Press TALK on the device.
The TALK button
• Directly dial the phone number by pressing numeric keys
on the hardware keyboard.
Make a call from the Phone screen
On the Phone screen, tap the desired phone number, then tap .
Make a call from Contacts
1. On the Phone screen, tap Contacts at the bottom of the display.
2. Tap the desired contact, and press TALK twice.
Make a call from Call History
1. On the Phone screen, tap .
2. Scroll to the desired contact or phone number, and tap Call.
The Phone screen
8 |
Q.4 Synchronizing with ActiveSync
Using Microsoft® ActiveSync®, you can synchronize information on your device with
information on your PC, such as Outlook content. ActiveSync is already installed on your
device, but you need to install it on your PC if you don’t already have it. Insert the Getting
Started CD into the CD drive of your PC. Follow the instructions on the installation wizard
screen to install ActiveSync. Once installation is completed, connect the sync cable to the
device and plug it into your PC’s USB port.
To set up a partnership between the device and the PC, turn on your device. When the PC
detects a USB connection, it starts the ActiveSync Synchronization Setup Wizard. Follow
the instructions on the screen and select the Outlook items you want to synchronize.
Synchronization Setup Wizard
| 9
PC requirement to run ActiveSync 4.x
To connect your device to the PC, you have to installed Microsoft® ActiveSync® program
on your PC. ActiveSync 4.x is included in the Installation CD, which is compatible with the
following operating systems and applications:
• Microsoft® Windows® 2000 Service Pack 4
• Microsoft® Windows® Server 2003 Service Pack 1
• Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1
• Microsoft® Windows® Server 2003 x64 Edition Service Pack 1
• Microsoft® Windows® XP Professional Service Packs 1 and 2
• Microsoft® Windows® XP Home Service Packs 1 and 2
• Microsoft® Windows® XP Tablet PC Edition 2005
• Microsoft® Windows® XP Media Center Edition 2005
• Microsoft® Windows® XP Professional x64 Edition
• Microsoft® Outlook® 98, Microsoft® Outlook® 2000 and Microsoft® Outlook® XP, and
Microsoft® Outlook® 2003 messaging and collaboration clients
• Microsoft® Office 97, excluding Outlook
• Microsoft® Office 2000
• Microsoft® Office XP
• Microsoft® Office 2003
• Microsoft® Internet Explorer 4.01 or later (required)
• Microsoft® Systems Management Server 2.0
10 |
Q.5 Setting Up an E-mail Account
You can send E-mail messages by synchronizing or by connecting directly to an E-mail
server through your Internet service provider or a corporate network.
www. mywindowsmobile.com - here you can customize email settings per your device and
carrier.
Set up an e-mail account
1. Tap Start > Messaging.
2. Tap Menu > Tools > New Account.
3. Enter your e-mail address, and tap Next. Auto
configuration will help you download necessary
e-mail server settings.
4. Once Auto configuration has finished, tap Next.
5. Enter your name (the name you want displayed
when you send e-mail) and your password.
Tip Select the Save Password check box if you want to save your password so that you do not
need to enter it again.
Setting up e-mail account
Tabla de contenidos
Otros manuales de Teléfono móvil de UTStarcom
UTStarcom
UTStarcom Handset Manual de usuario
UTStarcom
UTStarcom CDM7176M Manual de usuario
UTStarcom
UTStarcom Sidekick ID Manual de usuario
UTStarcom
UTStarcom F1000 Series Manual de usuario
UTStarcom
UTStarcom F1000 Series Manual de usuario
UTStarcom
UTStarcom F1000G Manual de usuario
UTStarcom
UTStarcom CDM1450 Manual de usuario
UTStarcom
UTStarcom F1000 Series Manual de usuario
UTStarcom
UTStarcom CDM7025 Manual de usuario
UTStarcom
UTStarcom CDM8450SP Manual de usuario
UTStarcom
UTStarcom UTS 700 U Manual de usuario
UTStarcom
UTStarcom UTS 718 U Manual de usuario
UTStarcom
UTStarcom UTS 702 U Manual de usuario
UTStarcom
UTStarcom CDM-8625 Manual de usuario
UTStarcom
UTStarcom C1100 Manual de usuario
UTStarcom
UTStarcom CDM 1080 Manual de usuario
UTStarcom
UTStarcom GSM708 Manual de usuario
UTStarcom
UTStarcom PPC 6700 Manual de usuario
UTStarcom
UTStarcom CDM-8935 Manual de usuario
UTStarcom
UTStarcom UTS700X Manual de usuario
