UTE UHKVM-70XC Manual de usuario
www.ute.de
UHKVM-70XC
USB-C KVM Extender over HDBaseT3.0
All Rights Reserved
Version: UHHKVM_2023V1.1
User Manual
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG www.ute.de
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG www.ute.de
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact your local dealer for
maintenance assistance. The functions described in this version were updated till
January, 2023. In the constant effort to improve the product, we reserve the right to
make functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
All product function is valid till 2023-01.
Trademarks
Product model and logo are trademarks of U.T.E. electronic GmbH & Co. KG.
Any other trademarks mentioned in this manual are acknowledged as the properties of
the trademark owner. No part of this publication may be copied or reproduced without
the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG www.ute.de
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
⚫Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
⚫Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
⚫Using supplies or parts not meeting the specifications of product may cause
damage, deterioration or malfunction.
⚫Refer all servicing to qualified service personnel.
⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
⚫Do not put any heavy items on the extension cable in case of extrusion.
⚫Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
⚫Install the device in a place with fine ventilation to avoid damage caused by
overheat.
⚫Keep the module away from liquids.
⚫Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.
⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
⚫Unplug the power cord when left unused for a long period of time.
⚫Information on disposal for scrapped devices: do not burn or mix with general
household waste, and please treat them as normal electrical wastes.
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG www.ute.de
Table of Contents
1. Product Introduction....................................................................................................1
1.1 Introduction to 4K60 18G USB-C KVM Extender Set UHKVM-70XC ................1
1.2 Features ............................................................................................................1
1.3 Package List ......................................................................................................2
2. Panel Description........................................................................................................3
2.1 USB-C KVM Transmitter (UHKVM-70XCT) .......................................................3
2.2 USB-C KVM Receiver (UHKVM-70XCR)...........................................................4
3. System Connection.....................................................................................................5
3.1 Usage Precaution ..............................................................................................5
3.2 System Diagram UHKVM-70XC ........................................................................5
4. Specification ...............................................................................................................7
5. Panel Drawing ............................................................................................................9
5.1 USB-C KVM Transmitter (UHKVM-70XCT) .......................................................9
5.2 USB-C KVM Receiver (UHKVM-70XCR).........................................................10
6. After Sales/ Customer Service ..................................................................................11
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG 1 www.ute.de
1. Product Introduction
1.1 Introduction to 4K60 18G USB-C KVM Extender Set UHKVM-70XC
The UHKVM-70XC is an USB-C KVM Extender Set that allows one USB channel to be
transmitted over distances of up to 40m at 4K@60Hz and 70m at 4K@30Hz via CAT6A
cable.
The USB-C KVM Extender Set UHKVM-70XC includes one USB-C KVM HDBT3.0
Transmitter (UHKVM-70XCZ) and one USB-CKVM HDBT Receiver (UHKVM-70XCR).
The transmitter features one USB-C input and one HDBaseT3.0 output. For the USB-C
input, it provides an AV ideal interface for connecting to the Macbook or other device
with SlimPort output. And there's also a USB-C port for charging devices.
The receiver features one HDMI output, one HDBaseT3.0 input and 4 USB 2.0 ports for
connecting with KVM device such as camera, keyboard and mouse.
1.2 Features
⚫4K60 18G KVM Extender over HDBaseT 3.0.
⚫USB-C input supports 4K@60Hz 4:4:4 and
100W USB Power Delivery (100W fast charging of connected devices) when an
additional USB-C power supply is connected to the second USB-C port
⚫Supports to transmit up to 40m at 4K@60Hz and 70m at 4K@30Hz.
⚫Supports bi-direction 24V PoC power supply
- only one power supply unit is needed in the system
⚫Transmitter (UHKVM-70XC) supports USB-C charging port to charge input device
up to 100W, which is enough for the latest Macbook
⚫5 USB 2.0 ports for connecting with KVM device.
⚫Micro-USB for firmware upgrade.
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG 2 www.ute.de
1.3 Package List
⚫1x UHKVM-70XCT: 4K60 18G USB-C over HDBaseT 3.0 KVM Transmitter
⚫1x UHKVM-70XCR: 4K60 18G USB-C over HDBaseT 3.0 KVM Receiver
⚫4x Mounting Ears with 4 Mounting Screws
⚫8x Rubber feets
⚫1x Power Adapter (24V DC 1.25A)
⚫1x User Manual
Notes:
•Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
•Please contact your dealer immediately if any damage or defect in the components
is found.
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG 3 www.ute.de
2. Panel Description
2.1 USB-C KVM Transmitter (UHKVM-70XCT)
Figure 2- 1 UHKVM-70XCT Front and Rear Panel
①USB-C IN: Connects to the Macbook or other device with SlimPort output.
②DEVICE: USB 2.0 Ports for connecting device.
③POWER: Connects to adapter to charge the USB-C IN.
④FW: Micro-USB for firmware upgrade.
⑤HDBT OUT: Connects to the HDBT IN port of the USB-C KVM Receiver
UHKVM-70XCR by a CAT6A cable.
⑥DC 24V: DC connector for the power adapter connection.
⑦POWER LED: The LED illuminates green when the power is connected.
Note: Pictures shown in this manual are only for reference.
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG 4 www.ute.de
2.2 USB-C KVM Receiver (UHKVM-70XCR)
Figure 2- 2 UHKVM-70XCR Front and Rear Panel
①HDMI OUT: Connects to the HDMI display.
②DEVICE (1~4): 4 USB Ports for connecting KVM device:
(2) Type-A USB 2.0 5V250mA Power Supply
(1) Type-A USB 2.0 5V1A Power Supply
(1) Type-C USB 2.0 5V1A Power Supply
③HDBT IN: Connects to the HDBT OUT port of the USB-C KVM Transmitter
UHKVM-70XCT by a CAT6A cable.
④DC 24V: DC connector for the power adapter connection.
⑤POWER LED: The LED illuminates green when the power is connected.
Note: Pictures shown in this manual are only for reference.
UHKVM-70XC: 4K60 18G USB-C KVM Extender over HDBaseT3.0
U.T.E. electronic GmbH & Co. KG 5 www.ute.de
3. System Connection
3.1 Usage Precaution
⚫Make sure all components and accessories included before installation.
⚫System should be installed in a clean environment with proper temperature and
humidity.
⚫All of the power switches, plugs, sockets, and power cords should be insulated and
safe.
⚫All devices should be connected before power on.
3.2 System Diagram UHKVM-70XC
The following diagrams illustrate typical input and output connection/ application that
can be utilized with 4K60 18G USB-C KVM Extender UHKVM-70XC:
Figure 3- 1 Connection and System Diagram
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Extensor de UTE
