UTAH SCIENTIFIC UTAH-100/UDS XY-Panel Guía de configuración
UTAH-100/UDS XY-Panel
Setup and Operation Guide
ii
UTAH 100/UDS XY Control Panel
• Document Number: 82102-0084
• Document Version: 1.0
• Date: January 28, 2015
• Printed in U.S.A.
Copyrights and Trademarks
© 2015 Utah Scientific, Inc., All rights reserved. Any use or reproduction of this guide’s
contents without the prior written consent of Utah Scientific, Inc. is strictly prohibited.
•UTAH 100 is a trademarks of Utah Scientific, Inc.
•Windows, Windows 2000 and Windows NT and XP are registered trademarks of
Microsoft Corporation.
•All other product names and any registered or unregistered trademarks mentioned in
this guide are used for identification purposes only and remain the exclusive property
of their respective owners.
Notice
Information contained in this guide is subject to change without notice or obligation.
While every effort has been made to ensure that the information is accurate as of the
publication date, Utah Scientific, Inc. assumes no liability for errors or omissions. In
addition, Utah Scientific, Inc. assumes no responsibility for damages resulting from the
use of this guide.
FCC Compliance (USA) and Digital Equipment Com-
pliance (Canada)
This equipment has been tested and found to comply with the limits for a Class A, digital
device, pursuant to Part 15, Subpart B of the FCC Rules and the Canadian EMC
Requirement (ICES-003). These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case, the user will be required to correct the
interference at their own expense. Shielded cables must be used to ensure compliance with
the FCC Class A limits.
iii
Section 1
Declaration of Conformity
Utah Scientific, Inc.
4750 Wiley Post Way, Suite 150
Salt Lake City, Utah 84116-2878 U.S.A.
We declare our sole responsibility that the UTAH-100/UDS Digital Routing Switcher is in
conformance with the following standards:
Emission
•EN55022:1994+A1&A2
Immunity
•EN55024:1998
•EN61000-3-2
•EN61000-3-3
Safety
•IEC 60950-1:2001 /EN 60950-1:2001
Following the provisions of the Directive(s) of the Council of the European Union:
•EMC Directive 89/336/EED
•Low Voltage Electrical Directive 72/23/EEC
Utah Scientific, Inc. hereby declares that the product specified above conforms to the above
Directive(s) and Standard(s).
iv
Important Safeguards and Notices
This section provides important safety guidelines for the Operator and Service Personnel.
Specific warnings and cautions are found throughout the guide where they apply, but may
not appear here. Please read and follow the important safety information, specifically
those instructions related to risk of fire, electric shock, or injury to persons.
Safety Symbols
•Hazardous Voltage symbol
•Caution symbol. The product is marked with this symbol when
it is necessary to refer to the manual to prevent damage to the
product.
Warnings
Please observe the following important warnings:
•Any instructions in this guide that require opening the chassis,
changing a power supply, or removing a board, should be per-
formed by qualified personnel only. To reduce the risk of elec-
tric shock, do not perform any service unless you are qualified
to do so.
•Heed all warnings on the unit and in the operating instructions.
•Do not use this product in or near water. Disconnect AC power
before installing any options or servicing the unit unless
instructed to do so by this manual.
•This product is grounded through the power cord ground con-
ductor. To avoid electric shock, plug the power cord into a
properly wired receptacle before connecting the product inputs
or outputs.
•Route power cords and other cables so they won’t be damaged.
•The AC receptacle (socket) should be located near the equip-
ment and be easily accessible.
•Disconnect power before cleaning. Do not use any liquid or
aerosol cleaner - use only a damp cloth.
v
Section 1
•Dangerous voltages exist at several points in this product. To avoid
personal injury, do not touch exposed conductors and components
while power is on. Do not insert anything into either of the systems
two-power supply cavities with power connected.
•Do not wear hand jewelry or watches when troubleshooting high
current circuits, such as power supplies. During installation, do not
use the door handles or front panels to lift the equipment as they
may open abruptly and injure you.
•To avoid fire hazard when replacing fuses, use only the specified
correct type, voltage and current rating as referenced in the appro-
priate parts list for this product. Always refer fuse replacement to
qualified service personnel.
•Have qualified personnel perform safety checks after any service.
Cautions
Please observe the following important cautions:
•When installing this equipment do not install power cords to build-
ing surfaces. To prevent damage when replacing fuses, locate and cor-
rect the problem that caused the fuse to blow, before reconnecting
power.
•Use only specified replacement parts
vi
Company Information
Utah Scientific, Incorporated
4750 Wiley Post Way, Suite 150
Salt Lake City, Utah 84116-2878 U.S.A.
•Telephone: +1 (801) 575-8801
•FAX: +1 (801) 537-3098
•Technical Services (voice): +1 (800) 447-7204
•Technical Services (FAX): +1 (801) 537-3099
•E-Mail -General Information: [email protected]
•E-Mail -Technical Services: service@utsci.com
•World Wide Web: http://www.utahscientific.com
•After Hours Emergency: +1 (800) 447-7204. Follow the menu instructions for Emer-
gency Service.
vii
Section 1
Warranty Policies
Hardware Warranty
Utah Scientific, Inc. warrants to the original purchaser that the Utah Scientific
hardware is free from defects in materials and workmanship and will perform
substantially in accordance with the accompanying written materials under normal
use and service for a period of two (2), five (5), or ten (10) years from the date of
shipment. Any implied warranties on hardware are limited to the above three
warranty periods (depending on purchase). Some states/jurisdictions do not allow
limitations on duration of an implied warranty, so the above limitation may not apply
to certain specific purchasers.
Software Warranty
Utah Scientific warrants that the software will perform substantially in accordance
with the accompanying written materials for a period of one (1) year from the date of
shipment.
Customer Remedies
For the first one (1) year after purchase of the software and the first two (2), five (5),
or ten (10) years after the date of purchase of the hardware, Utah Scientific’s and its
suppliers’ entire liability and purchaser’s exclusive remedy shall be, at Utah
Scientific’s option, either:
• Return of the price paid, or
• Repair or replacement of the software or hardware that does
not meet the above warranties and is returned to Utah Scientific
under the returned materials authorization (RMA) process with
freight and forwarding charges paid.
After the initial warranty periods, purchaser’s exclusive remedy is the repair or
replacement of the hardware upon payment of a fixed fee to cover handling and
service costs based on Utah Scientific’s then-current price schedule. The above
warranties are void if failure of the software or hardware has resulted from an
accident, abuse, or misapplication. Any replacement software or hardware will be
warranted for the remainder of the original warranty period or thirty (30) days,
whichever is longer.
viii
No other warranties. To the maximum extent permitted by applicable law, Utah
Scientific and its suppliers disclaim all other warranties, either express or
implied, including, but not limited to implied warranties of merchantability and
fitness for a particular purpose, with regard to the software, the accompanying
written materials, and any accompanying hardware. This limited warranty gives
the purchaser specific legal rights. These rights may vary in certain
states/jurisdictions.
No liability for consequential damages. To the maximum extent permitted by
applicable law, in no event shall Utah Scientific or its suppliers be liable for any
damages whatsoever (including without limitation, damages for loss of business
profits, business interruption, loss of business information, or any other
pecuniary loss) arising out of the use of or inability to use Utah Scientific
products, even if Utah Scientific has been advised of the possibility of such
damages. Because some states/jurisdictions do not allow the exclusion or
limitation of liability for consequential or incidental damages, the above
limitation may not apply in those circumstances.
Table of Contents 1
Table of Contents
Section 1
Panel Operation
Introduction ........................................................................... ......................... 1-1
System Setup Requirements ................................................ ......................... 1-1
The UTAH-100/UDS XY Panel ............................................. ......................... 1-2
Home ........................................................................................................ 1-2
Options ..................................................................................................... 1-2
Source Track Button .................................................................1-3
Auto Source Preset ..................................................................1-3
Auto Destination Select ............................................................1-3
Knob Clockwise ........................................................................1-4
Knob Take ................................................................................1-4
Network Setup .......................................................................................... 1-4
Network Summary .................................................................................... 1-6
Panel Info ................................................................................................. 1-7
Additional Notes - Review ........................................................1-7
Operation / Making a Take .......................................................1-8
Panel Operation .................................................................... ......................... 1-10
The Link Light ...........................................................................1-11
Panel Buttons ........................................................................................... 1-12
Source and Destination ............................................................1-12
Lock ..........................................................................................1-12
Browser Operation ................................................................ ......................... 1-13
General Overview ..................................................................................... 1-13
Radio Buttons ...........................................................................1-13
System ..................................................................................................... 1-13
Source Categories .................................................................................... 1-14
Destination Categories button .................................................................. 1-15
Encoding ............................................................................... ......................... 1-16
Enabling Function Parameters ................................................................. 1-16
Save and Program ................................................................................... 1-17
2 UTAH-100/UDS Setup & Operations Guide
Tabla de contenidos
Otros manuales de Cambiar de UTAH SCIENTIFIC
UTAH SCIENTIFIC
UTAH SCIENTIFIC Utah-400 iP Guía de configuración
UTAH SCIENTIFIC
UTAH SCIENTIFIC UHD 12G Guía de configuración
UTAH SCIENTIFIC
UTAH SCIENTIFIC Utah-400 iP Manual de usuario
UTAH SCIENTIFIC
UTAH SCIENTIFIC MX-Hub Manual de usuario
UTAH SCIENTIFIC
UTAH SCIENTIFIC UTAH-200 Manual de usuario
UTAH SCIENTIFIC
UTAH SCIENTIFIC BPS-2020 Manual de instrucciones
UTAH SCIENTIFIC
UTAH SCIENTIFIC Utah-400 iP Manual de usuario
UTAH SCIENTIFIC
UTAH SCIENTIFIC Utah-400 iP Manual de instrucciones
UTAH SCIENTIFIC
UTAH SCIENTIFIC UTAH-100/UDS XY Manual de instrucciones
UTAH SCIENTIFIC
UTAH SCIENTIFIC Utah-400 2 Series Manual de instrucciones
