US Robotics USR5411 Manual de usuario

Wireless MAXg PC Card

Installation Guide

Guide d'installation

Installationsanleitung

Guida per l’installazione

Guía de instalación

Installatiegids

R24.0510.00

U.S. Robotics Wireless MAXg PC Card Installation.................................. 1

Installation de la carte U.S. Robotics Wireless MAXg PC Card.................15

Installation der U.S. Robotics Wireless MAXg PC Card............................ 29

Installazione di U.S. Robotics Wireless MAXg PC Card............................ 43

Instalación de la Wireless MAXg PC Card de U.S. Robotics ..................... 57

Installatie van de U.S. Robotics Wireless MAXg PC Card......................... 71

U.S. Robotics Wireless

MAX

g PC Card Installation

Package Contents:

Note: You must have administrator rights on your computer in order to install this

product.

Prepare for installation

During the Installation procedure, you may be prompted for your Windows Operating system CD-

ROM. Make sure you have it available in case you need it.

For the most updated information, visit: http://www.usr.com/support

You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed

information.

Be sure to find out what letter your CD-ROM drive uses before you begin installing your new

product. You will need to know this to properly install your software.

If you are installing only a Wireless MAXg PC Card, go to the

section entitled Installing JUST the Wireless MAXg PC Card.

Installing BOTH a Wireless MAXg Router and the

Wireless MAXg PC Card

Step One: Connect the Wireless

MAX

g Router

A. Turn off your computer and your cable or DSL modem.

Disconnect the modem’s Ethernet cable from your com-

puter and connect it to the WAN port of the Wireless

MAXg Router.

B. Connect the supplied Ethernet cable to the Network Interface Card of your computer and to

one of the LAN ports of the Wireless MAXg Router.

C. Connect the antenna to the Wireless MAXg Router.

D. Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-

let. Turn on your computer.

USR5411 Wireless MAXg PC Card Installation CD-ROM which includes User Guide

Quick Installation Guide

E. Turn on your cable or DSL modem.

Note to UK Users: Attach the correct power plug to the power adapter.

Note: You have finished connecting the Wireless MAXg Router and will now need to install

the Wireless MAXg PC Card.

Step Two: Install the Wireless

MAX

g PC Card

A. Insert the PC Card Installation CD-ROM into the CD-ROM drive of the computer you are

installing the PC Card in. The Installation CD Graphical User Interface (GUI) will appear on

your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and

click OK.

B. Select your product and then click Installation.

Note: You may receive a “Digital Signature Not Found” or “Windows Logo testing” screen.

Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in

conjunction with the supported hardware and has verified compatibility with Windows

2000, Me, and XP. Because U.S. Robotics wants its customers to take full advantage of the

network card’s functionality, it has made the drivers available.

C. Follow the on-screen instructions.

Note: You will need to install this Installation CD-ROM on all the PCs on which you plan to

install Wireless MAXg PC Cards.

D. When prompted, locate an available PC Card slot and

fully insert the Wireless MAXg PC Card. PC Card slots

are typically on the side of laptops. You may hear a

beep when the Wireless MAXg PC Card is fully inserted

and detected.

E. When prompted, click Restart to restart your computer.

Step Three: Set up a Wireless Network

A. When you are prompted, select Configure a new U.S. Robotics Wireless MAXg Router and

click Next. You will need to wait while the Wireless MAXg PC Card communicates with the router.

B. If prompted, select your Internet Connection type and click Next. Depending on the type of

Internet Connection that you choose, you may need to enter some additional information.

C. Enter a Network name and a Pass phrase (also known as network key) for your wireless

encryption and click Next. You will need to wait while the router and the PC Card are config-

ured.

Note: U.S. Robotics recommends that you enable WPA so that your wireless network is

secure. Make sure you assign the same secret WPA key to all your wireless devices to

ensure network connectivity. For more information about this and additional wireless

parameters, refer to the User Guide on the U.S. Robotics Installation CD-ROM.

D. When prompted, enter a User name and Password for the router login and then click Next.

Wait while the configuration continues.

E. You will then see a screen that shows you the settings for your Wireless MAXg Router. These

settings will be saved to a text file on your computer desktop and you have the option to

print them out if your computer is connected to a printer. When you are finished looking at

this information, click Finish. Your Wireless MAXg Router and PC Card should all be config-

ured and ready for use.

Congratulations! You have finished installing your product! The Wireless

MAX

g PC Card

should be connected to the network that you set up.

If you experience any problems connecting to a wireless networking device, refer to the

Troubleshooting section in this guide or to the Configuration section of the User Guide on the U.S.

Robotics Installation CD-ROM for more information.

Opening the Configuration Utility

You should now see a small icon for the Configuration Utility in the system tray by your clock on

your computer desktop. You can open the Configuration Utility in two ways:

• Right-click the icon and click Open Utility.

• Left-click once on the Utility icon to open the quick connect screen. In the quick connect

screen, you can select an available network and enter the Network key, if applicable. Click

Connect to establish a wireless connection. You can also click Advanced to open the full

Configuration Utility.

The Configuration Utility is used to change or verify the configuration information that relates to

your Wireless MAXg PC Card. The Configuration Utility icon will be colored to indicate the status

of your wireless network: red for disconnected and green for connected with good quality.

Installing JUST the Wireless MAXg PC Card

Step One: Install the Wireless

MAX

g PC Card and drivers

A. Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD Graphical User

Interface (GUI) will appear on your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and

click OK.

B. Select your product and then click Installation.

Note: You may receive a “Digital Signature Not Found” or “Windows Logo testing” screen.

Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in

conjunction with the supported hardware and has verified compatibility with Windows

2000, Me, and XP. Because U.S. Robotics wants its customers to take full advantage of the

network card’s functionality, it has made the drivers available.

C. Follow the on-screen instructions.

Note: You will need to install this Installation CD-ROM on all the PCs on which you plan to

install Wireless MAXg PC Cards.

D. When prompted, locate an available PC Card slot and

fully insert the Wireless MAXg PC Card. PC Card slots

are typically on the side of laptops. You may hear a

beep when the Wireless MAXg PC Card is fully inserted

and detected.

E. When prompted, click Restart to restart your computer.

Step Two: Connect to a Wireless Network

A. When you are prompted, select Connect to an established wireless router and click Next.

You will need to wait while the Wireless MAXg PC Card communicates with the router.

B. A list of available wireless networks will appear on the “Connect to Existing Router or Access

Point” screen.

C. Select the appropriate wireless network and click Next.

Note: If the device does not appear in the list, you can enter the name of the network

under Network name. One reason the device may not appear is if Broadcast Network

name is disabled in your wireless router or access point. You can also click Detect and

your Wireless MAXg PC Card will search the area again for available wireless networking

devices.

D. Configuration information for that network will appear. If the network specified is not secure,

the “Installation Complete” screen will appear. Click Finish. If you have specific security settings

enabled on the wireless network you will be connecting to, such as WEP or WPA2, you will need to

select your security type and click Next. Enter the appropriate security information on the next

screen and click Next.

E. Click Finish. If prompted when the setup is complete, restart your computer.

Congratulations! You have finished installing your product! The Wireless MAXg PC Card

should be connected to the wireless network that you selected.

If you experience any problems connecting to a wireless networking device, refer to the

Troubleshooting section in this guide or to the Configuration section of the User Guide on the

U.S. Robotics Installation CD-ROM for more information.

Tabla de contenidos

Idiomas:

Otros manuales de Hardware de computadora de US Robotics

US Robotics

US Robotics 3.0 PC-EXPRESS Manual de usuario

US Robotics

US Robotics x2 Courier I-modem Manual de usuario

US Robotics

US Robotics USR997901A Manual de usuario

US Robotics

US Robotics MAXg Manual de usuario

US Robotics

US Robotics USB 3.0 PC-EXPRESS CARD Manual de usuario

US Robotics

US Robotics Wireless Ndx PC Card Manual de usuario

US Robotics

US Robotics USR2410 Manual de usuario

US Robotics

US Robotics USR997901A Manual de usuario

US Robotics

US Robotics 5412 Manual de usuario

US Robotics

US Robotics USR5410 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario