US Fleet Tracking CloudSat3 Solar Hoja de especificaciones
CloudSat3 Solar
Get Started
MOUNTING
• Mount the CloudSat3 Solar device on the top
side (recommended) of the asset/equipment
with a clear view of the sky and access to a
direct light source.
• Secure the device by installing screws into the
four corners of the device and attaching them to
your asset/equipment.
• An optional foam barrier with adhesive backing
is included for a more secure installation.
Need assistance? Call our support team at
405.726.9900, opt. 3.
CSSv1.5
405.726.9900 | www.usfleettracking.com
mounting
point
CloudSat3 Solar
Get Started
POWERING ON
CSSv1.5
405.726.9900 | www.usfleettracking.com
• Mount the device. Refer to the other side of this
card for mounting details.
•Remove and retain the black rubber magnetic
tab located on the top of the device opposite of
the solar panel. Do not dispose of this tab as it
is important for troubleshooting and storage.
•Once the black rubber magnetic tab is removed,
the device will transmit a “power on” update
within five minutes and initiate the device’s
update sequence according to your rate plan.
Need assistance? Call our support team at
405.726.9900, opt. 3.,p
rubber
tab
Tabla de contenidos
Otros manuales de GPS de US Fleet Tracking
US Fleet Tracking
US Fleet Tracking USFT NT-V3 Manual de usuario
US Fleet Tracking
US Fleet Tracking NT-V4 Manual de usuario
US Fleet Tracking
US Fleet Tracking USFT NT-X5ia Manual de usuario
US Fleet Tracking
US Fleet Tracking USFT VT-X5 Manual de usuario
US Fleet Tracking
US Fleet Tracking USFT NT-X5 Manual de usuario
US Fleet Tracking
US Fleet Tracking USFT AT-V3 Manual de usuario
US Fleet Tracking
US Fleet Tracking AT-V4 Pro Manual de usuario
US Fleet Tracking
US Fleet Tracking USFT AT-V4 Pro Manual de usuario
US Fleet Tracking
US Fleet Tracking PT-X5 Manual de usuario
US Fleet Tracking
US Fleet Tracking CloudSat3 Solar Hoja de especificaciones
