URVOLAX UR61X Manual de usuario
1080P HD Digital Wireless Backup Camera Systems
Product Manual / Installation Instructions
URVOLAX UR61X
Please read this manual thoroughly before operating the device,
Keep it for future reference.
Please Do Bench Test before Installation in Vehicle
Contents
1. Introduction.......................................................................................1
2. Camera................................................................................................2
3. Monitor...........................................................................................3-5
4.Installation Guide Bench Test.......................................................6
5.Installation Guide in Vehicle.....................................................7-8
6. Product Specification.....................................................................9
7. What’s in the PACKAGE & PART LIST.............................10-11
8. Quick Installation Steps...............................................................12
9. Pairing...............................................................................................13
10. Positioning....................................................................................14
11. Troubleshooting.........................................................................15
12. FAQ............................................................................................16-17
13. Warranty Card&Customer Support Contacts...................18
1
1.Introduction
Thanks for purchasing our URVOLAX Digital Wireless
Backup Camera Systems! With this manual, you will be able
to properly install and operate the unit.
Digital Wireless Connection - the product adopts latest car
point to point wireless connection technology.
No interference with other wireless devices.
The camera is powered by connecting the wires to your
reverse tail lights. When the vehicle is in reverse, the image
is wireless transmitted to the monitor. Monitor is directly
powered from the cigarette lighter socket or ACC, No need
to run any wires from the camera to the monitor. It can help
you back up or look around your car when trying to change
lanes on expressways.
Moreover, it can provide reliable security for your journey.
2
Tips:
1)The camera's infrared light will start automatically in low
brightness.
2)You need to connect the power cable to the camera’s
power port to power on the camera.
Antenna
Rain-Cover
Daylight Sensor
High Definition Lens
18 pcs IR LEDs
Mount Bracket
Power Port
2.Camera
3
3.Monitor
POWER
CH-
MENU
4
※MENU
■PAIRING
■PICTURE
■MIR-FLIP
■SYSTEM
5
※Gridline Adjustment
6
Bench Test is A MUST before Installation .
Please use the included connector to do Bench Test
4.Installation Guide Bench Test
plug into cigar
socket to get
power
TEST OK
with Display
√
Make sure Positive/
Negative is tighten
connected with
screw
-+
REVERSED POSITIVE/NEGATIVE will cause DAMAGE!!!
CAUTIOUS
！
7
Please pay attention to the positive and negative poles of
the wire. If the positive and negative poles are reversed, it
may cause the monitor to smoke. If the monitor is emitting
smoke, turn off the power immediately and contact
customer support. Thanks!
Before installing, make sure you connect the power cable
and antenna to the camera.
5.Installation Guide in Vehicle
Caution
Red to your car’s
power + :Like
battery or ACC
Black to GND :Any
metal from your car
Supply power by
cigarette or wires
as you choose
This port to your car
cigarette port to get
power for the screen
Install the antenna
in the camera
Connect the power
cable to the black
port of the camera
Red wire to power +:like car reversing
light
Black to GND:Any metal from your car
8
Camera Connection:
Step 1: Choose the camera locations.
Step 2: Drill a 12mm Diameter Cable Hole and Secure the
Camera With Two Screws.(Accessory Includes Screws)
Step 3: Locate the reversing lights or running lights wiring
on your vehicle.You may need to remove the interior panel
in order to locate.Connect the red wire of the power cable
to the positive and the black wire to the ground.
Monitor Connection:
Monitor is directly powered from the cigarette lighter
socket or ACC, There is no need to run any wires from the
camera to the monitor.
Tips
We recommend doing a benchmark test before installation
to ensure that all components are working properly.
Consult an experienced technician if you are not familiar
with installing the Backup Camera.
......................................................................................................................
Tabla de contenidos
