Universal E-40 Manual de usuario
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.UniversalHomeFitness.com
R-20 / R-25
4/15/15
U-10 / U-15
E-40 / E-45
2
TABLE OF CONTENTS
Important Safety Instructions 3
Safety Warning Labels / Serial Number 5
Specications 6
BeforeAssembly 6
Parts 7
Hardware 8
Tools 8
Assembly 9
Leveling the Bike 17
Moving the Bike 17
Features 18
Console Features 19
Contact Heart Rate (CHR) 20
Operations 22
Mounting and Dismounting 22
Quick Start / Manual Program 22
ProlePrograms 23
Pausing or Stopping 23
Results 23
Changing Unit Measures
(English Imperial/Metric) 24
Maintenance 25
Troubleshooting 28
Warranty 31
Nautilus,Inc.,(800)NAUTILUS/(800)628-8458,www.NautilusInc.com-CustomerService:NorthAmerica(800)605-3369,
[email protected] | outside U.S. [email protected] | Printed in China | © 2015 Nautilus, Inc. | ® indicates trademarks
registered in the United States. These marks may be registered in other nations or otherwise protected by common law.
Universal,Bowex,Schwinn,andNautilusaretrademarksownedbyorlicensedtoNautilus,Inc.
Tovalidatewarrantysupport,keeptheoriginalproofofpurchaseandrecordthefollowinginformation:
Serial Number __________________________
Date of Purchase ____________________
Toregisteryourproductwarranty,goto: www.UniversalHomeFitness.com/register
Orcall1(800)605–3369.
Ifyouhavequestionsorproblemswithyourproduct,pleasecall1(800)NAUTILUS(628–8458)
Orgoto:www.UniversalHomeFitness.com
3
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions. Read and understand the complete Manual.
Keep the Manual for future reference.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this machine
from the electrical outlet immediately after using and before cleaning.
To decrease the risk of burns, electric shock, or injury to persons, read and understand the complete
Owner’s Manual. Failure to follow these guidelines can cause a serious or possibly fatal electrical shock or other serious
injury.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not connect power supply to the machine until instructed to do so.
• The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting
on or taking off parts.
• Beforeeachuse,examinethemachinefordamagetopowercord,loosepartsorsignsofwear.Donotuseiffoundin
this condition. Contact Nautilus Customer Service for repair information.
• Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the
machine or pose a risk of injury to the user.
• Do not drop or put objects into any opening of the machine.
• Do not assemble this machine outdoors or in a wet or moist location.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.
• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and
will void the warranty.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use
genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the
warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.
• Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by
the manufacturer.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
• Thisproductcontainsmagnets.Magneticeldscaninterferewiththenormaluseofcertainmedicaldevicesataclose
range.Usersmaycomeintoproximityofthemagnetsintheassembly,maintenance,and/oruseoftheproduct.Given
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical
provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number”
section to determine the location of the magnets on this product.
• SAVE THESE INSTRUCTIONS.
4
Before using this equipment, obey the following warnings:
!Read and understand the complete Manual. Keep the Manual for future reference.
Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or
dislodged, contact Nautilus Customer Service for replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power
cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine.
Place the power cord in a secure location.
• Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous
to children.
• Not intended for use by anyone under 14 years of age.
• Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyour
chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values
calculated or measured by the machine’s computer for reference purposes only.
• Beforeeachuse,examinethismachinefordamagetopowercord,powerreceptacle,loosepartsorsignsofwear.Do
not use if found in this condition. Contact Nautilus Customer Service for repair information.
• Maximumuserweightlimit:275lbs.(125kg).Donotuseifyouareoverthisweight.
• This machine is for home use only.
• Donotwearlooseclothingorjewelry.Thismachinecontainsmovingparts.Donotputngersorotherobjectsinto
movingpartsoftheexerciseequipment.
• Always wear rubber soled athletic shoes when you use this machine. Do not use the machine with bare feet or only
wearing socks.
• Set up and operate this machine on a solid, level, horizontal surface.
• Make the Pedals stable before you step on them. Use caution when you step on and off the machine.
• Disconnect all power before servicing this machine.
• Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.
• Keepatleast24”(0.6m)oneachsideofthemachineclear.Thisistherecommendedsafedistanceforaccessand
passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in
use.
• Donotoverexertyourselfduringexercise.Operatethemachineinthemannerdescribedinthismanual.
• Perform all regular and periodic maintenance procedures recommended in the Owner’s Manual.
• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not
hit the user.
• Keep the Foot Pedals clean and dry.
• Exerciseonthismachinerequirescoordinationandbalance.Besuretoanticipatethatchangesinspeedand
resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.
• A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting
on or taking off parts.
5
SAFETY WARNING LABELS AND SERIAL NUMBER
FCC Compliance
Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoid
the user’s authority to operate the equipment.
Thepowersupplycomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
•
•
•
•
•
•
•
•
•
•
•
•
Serial number
Product
specication
6
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum72”x107”(183cmx272cm).Besurethattheworkoutspaceyou
are utilizing has adequate height clearance, taking into consideration the height of the user and the elliptical machine.
Basic Assembly Tips
Followthesebasicpointswhenyouassembleyourmachine:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.
5. The assembly requires 2 people.
Note:Someaxlescontainoil.Usecautiontoavoidstainingclothesorcarpet.
SPECIFICATIONS
Maximum User Weight: 275 lbs. (125 kg)
Power Requirements: 4DBatteries(LR20)–notincluded
OperationalVoltage: 6VDC
Regulatory Approvals:
OptionalACPowerAdapter:ULlisted,CSAcertied(orequivalent),
Rated120V60HzInput,9VDC,0.5AOutput.Class2orLPS.
This product, its packaging, and components contain chemicals
known to the State of California to cause cancer, birth defects, or
reproductive harm. This Notice is provided in accordance with
California’sProposition65.Ifyouwouldlikeadditionalinformation,
pleaserefertoourwebsiteatwww.nautilus.com/prop65.
56” (142 cm)
64.5” (164 cm)
23.7” (60 cm)
7
PARTS
17
A decal has been applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly.
Item Qty Description Item Qty Description
1 1 Frame 10 1 Pedal Arm, Right
2 1 Front Stabilizer 11 1Pedal Arm, Left
3 1 Water Bottle Holder 12 1 Lower Left Handlebar Arm
4 1 Console 13 1 Lower Right Handlebar Arm
5 1 Console Mast 14 1 Upper Left Handlebar Arm
61 Leg, Left 15 1 Upper Right Handlebar Arm
7 1 Leg, Right 16 1 Static Handlebar
8 1 Rail Assembly 17 1 Media Tray
9 2 Pedals
Note: Media Cable is attached to the Console.
8
HARDWARE / TOOLS
Tools
Included Not Included
4 mm
5 mm (recommended)
Item Qty Description Item Qty Description
A6 FlatHeadHexScrew,M8x20 J 2 Sleeve, Plastic
B 18 ButtonHeadHexScrew,M8x15 K6 FlatWasher,M6
C6Washer, Curved L 6 ButtonHeadHexScrew,M6x12
D 18 Spring Washer, M8 M 2 Shaft
E 4 Flat Washer, Wide N 2 Pedal Mount Plate
F 4 PlasticWasher(D16.2) O 8 Flat Washer, M8
G2WaveWasher,Small(D16.5) P 4 CarriageBolt,M6x25
H 2 Washer Q 4 ButtonHeadHexScrew,M6x14
I 2 Wave Washer, Large (D20)
Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may
be remaining Hardware after the proper assembly of your machine.
6 mm/#2 (2)
9
Note: Do not fully tighten the Hardware until the machine is completely assembled.
1. Attach Front Stabilizer to Frame
2. Attach Rail Assembly to Frame Assembly
ASSEMBLY
5mm
10
3. Connect the Console Cable
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp the Console
Cable.
4. Attach Console Mast to Frame Assembly
NOTICE: Do not crimp the Console Cable.
5
5
C
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Entrenador elíptico de otras marcas
Weslo
Weslo Momentum 4.0 Elliptical Manual de operación y mantenimiento
Progear Fitness
Progear Fitness Air elliptical pro 1307 Manual de usuario
Torque Fitness
Torque Fitness XPLLP Manual de usuario
Octane Fitness
Octane Fitness PRO3700C Manual de usuario
Xterra
Xterra FS5.8e Manual de usuario
Bodyguard
Bodyguard E-40 Manual de usuario
Bonn Germany
Bonn Germany Concept 2.2 Manual de usuario
Precor
Precor Resolute RSL 620 Manual de usuario
NordicTrack
NordicTrack E 9.2 Elliptical Manual de usuario
Vision Fitness
Vision Fitness X6600iNetTV Manual de usuario
Matrix
Matrix MX-A5x Manual de usuario
SportsArt Fitness
SportsArt Fitness ECO-NATURAL Elite E874 Manual de usuario
