Universal Remote Control Omega MX-650 Manual de usuario

omega

MX-650

Owner’s

Manual

The information in this manual is copyright protected. No part of this manual may be copied or reproduced

in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON-

TROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS-

SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior

notice. Omega is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark

of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks

of their respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

Thank You!

Thank you for purchasing the Omega Pre-Programmed and

Learning Remote Control. This manual is designed to assist you

step-by-step as you setup the Omega to replace all of your

remote controls and automate your home entertainment system.

Table of Contents

Getting Started 2

Button Layout 3

Basic Setup 5

Pre-Programmed Method 5

Learning Method 9

Volume Control Punch Through 12

Advanced Operation 14

Advanced Setup 16

Editing Button Labels 16

Macro Button Setup 19

Favorite Channel Setup 21

Hiding and Adding Pages 23

Erasing 25

Cloning One Omega to Another 26

Recalling Pre-Programmed Settings 27

Utilizing Optional RF Base Stations 28

IR/RF Signal Setting 31

ID # - Setting Base Station Address 33

EMITT - Setting IR Emitter Outputs 34

BLAST - Setting the Front Panel Blaster On or Off 35

Pre-Programmed Code Tables 37

Frequently Asked Questions 55

Warranty 55

Specifications 55

Getting Started

Congratulations!

You’ve purchased one of the most advanced and easy to setup control sys-

tems available. The Omega’s built-in library includes thousands of different

brands and models of remote controls. In most systems, all you have to do

to setup the Omega is enter which brands and models you own. If you

own a component too new to be in the library, the Omega uses advanced

learning technology to quickly set each Omega button, one at at time.

Setting up your Omega to replace all your existing remote controls can be

done in a few minutes. Basic Setup is described on pages 5 to 13.

The Omega’s exciting advanced features automate and customize opera-

tion in many ways. You could use Macro Setup to power on all of your

components and start the show with the press of one button! With the

Omega’s unique Favorite Channel capability, you can tune in a channel

with the press of one button instead of entering the entire channel number.

Any of the button names on the display can be edited as you like. It is best

to delay any Advanced Setup (described on pages 14 to 36) until after you

finish Basic Setup.

Battery Installation

Remove the battery compartment cover by pressing up the cover lock.

Insert four AAA batteries into the battery compartment as shown in the

diagram.

The Omega

Universal Remote Control, Inc.

MAIN

Button

takes you

to the

MAIN

Menu.

Screen

Labeled

Display

Buttons

Screen

Labeled

Display

Buttons

LIGHT

Button

PAGE

Numbers

FUNCTION

Buttons

TITLE

POWER

Button

FAVORITE

CHANNEL

Button

PAGE

Buttons

change the

page of

Display

Buttons.

Button Layout Transmitting

“Busy” Signal

Indicator*

*Note: When a command, macro or favorite channel is being transmitted, an icon will appear

in the top right corner of the display. While the Omega is “busy”, it will ignore a button push.

POWER

OFF

Button

The Omega

Selecting a New DEVICE Changes

All Button Commands Instantly

The Omega can operate twenty different devices even though it is only

one remote control. Let’s try it now! Press the MAIN button, then press

the TV DEVICE button.

The top of the screen changes from MAIN to TV. Now all of the buttons

change their function to operate a TV. Press the PAGE button. Watch the

labels of the display buttons change with each press. There are four

pages of display buttons already labeled for TV operation. To operate

another component (e.g., VCR, DVD etc.), press the MAIN button to

return to the MAIN menu. The MAIN menu displays ten of your Devices

on the screen. Simply press one of the screen-labeled Device buttons to

operate another device. If you don’t see the device name you want, then

use the PAGE buttons to display the remaining ten devices on page 2 of

the MAIN menu.

Light Button

Press the LIGHT button to backlight all the buttons. To turn off the back-

lighting, press the LIGHT button again, or just wait ten seconds (the back-

lighting automatically shuts itself off).

DEVICE

Button

MAIN

Button

LIGHT

Button

Universal Remote Control, Inc.

Basic Setup

You can start setting up your Omega using either the Pre-Programmed

Method or the Learning Method. However, all the buttons of the Omega

are setup at once with the Pre-Programmed Method, so it is usually faster

than the one-button-at-a-time Learning Method.

Pre-Programmed Method

Power on the A/V component you wish to setup, so that you can test

codes by sending power off commands.

Refer to the pre-programmed code tables on pages 37 - 52 and

write down the code numbers listed for your A/V component. The

code numbers are listed by categories of devices, then by brand.

See page 37 for a category list. Code tables with model numbers

are available at www.universalremote.com in the MX-650 area.

Press and hold both the MAIN and ENT (Enter) buttons for approxi-

mately three seconds. The top of the display will show “SETUP”.

You are in SETUP mode now.

Note: You have 30 seconds to perform a step while you are in SETUP mode. If

you don’t press a button within that time, the Omega will time out and return to

normal operation.

MAIN

Button ENT

Button

Press the P-PRO button to select the Pre-Programmed Method.

The display changes so that you can select which Device button to

setup.

Press the device button you’d like to setup.

The bottom of the display will now flash “FROM TABLE”.

P-PRO

Button

The Omega

Press the

Page button

to display

the other ten

Device

names.

First ten

Device Names

Universal Remote Control, Inc.

In this step you select which code table to use. Thus, you can pro-

gram a device named “TV” with codes from the CABLE code tables

and a device named” VIDEO” with codes from the TV code table.

If you don’t see the code table you need, press the PAGE buttons to

reveal the other page of code table categories, then select the code

table you want to use.

Note: Each name that appears in the display may include several types of

components. For example, the AUX category includes many types of cus-

tom installation devices. See page 37 for a list of component types each

Code Table contains.

Point the Omega at the component, then enter the first three digit

code number from your notes using the numbered buttons. After

you enter each three digit number, look at the component to see if

it turned off.

Continue to enter code numbers until the component turns off.

For Example: I have a Sony TV. I found the code numbers 070, 139,147,

126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered

buttons on the Omega, I entered 070 and looked at the TV. It didn’t turn

off, so I entered 139, then 147 and so on, until I found the code that pow-

ered off the TV.

Use the

number

buttons to

enter the

code

number.

Note: If a component fails to turn off after you have entered all of the code

numbers listed for your brand, your component might actually be manu-

factured by another brand. You can scan through the other brands in the

table using the UP and DOWN buttons to change the code number dis-

played, then tapping either the Power ON, OFF or any other button to see

if the component responds to any command. Alternatively, you can opt to

use the Learning Method on Page 9 if you can’t find a code set in the built-

in database.

When the component turns off, save the code number you entered

by pressing the SAVE button that appears on the screen.

Exit SETUP mode by pressing the MAIN button two times. When

the display shows “MAIN”, you are back in normal operating

mode.

SAVE

Button

Code Number You

Entered

MAIN

Button

The Omega

Scan Up to the

next Code

Number

Scan Down to the

Code Number

Press Power On

or Power Off to

test if the device

powers off.

Tabla de contenidos

Otros manuales de Control remoto universal de Universal Remote Control

Universal Remote Control

Universal Remote Control 4 Function DTV Remote Control Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700 Manual de usuario

Universal Remote Control

Universal Remote Control UR17E - CODE BOOK Manual de usuario

Universal Remote Control

Universal Remote Control Easy Clicker UR3-SR3 Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-6200L Manual de usuario

Universal Remote Control

Universal Remote Control Osiris MX-3500 Manual de usuario

Universal Remote Control

Universal Remote Control total control TRC-780 Manual de usuario

Universal Remote Control

Universal Remote Control Easy Clicker OCE-0009D Manual de usuario

Universal Remote Control

Universal Remote Control MX-350 Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700L Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5L-8700L Manual de usuario

Universal Remote Control

Universal Remote Control UR4U-MDVR2 Manual de usuario

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manual de usuario

Universal Remote Control

Universal Remote Control BW-1220US Manual de usuario

Universal Remote Control

Universal Remote Control WR7 Manual de usuario

Universal Remote Control

Universal Remote Control Universl Remote Manual de usuario

Universal Remote Control

Universal Remote Control UR3-J22TWM Guía del administrador

Universal Remote Control

Universal Remote Control Total Control TRC-1280 Manual de usuario

Universal Remote Control

Universal Remote Control OCE-0085A Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manual de usuario

Universal Remote Control

Universal Remote Control Complete Control MRF-260 Manual de usuario

Universal Remote Control

Universal Remote Control Customizer URC-300 Manual de usuario

Universal Remote Control

Universal Remote Control URC-L-1870 Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5L-6200L Manual de usuario

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario

Universal Remote Control omega MX-650 Manual de usuario

Manuales populares de Control remoto universal de otras marcas