Universal Remote Control Star Light SL-7000 Manual de usuario

OPERATING MANUAL

Universal

Remote

Control

Model: SL-7000

Thank you for purchasing the Star Light universal remote control.

This unit was desingned to fully complement your home entertainment

system. Any comments or questions about this product should be

directed to Universal Remote Control, Inc., New Rochelle, NY 10801.

You can also call our toll-free Customer Service Line at

1-800-901-0800 for any assistance.

Please read this instruction manual carefully.

The Star Light universal remote control has many advanced features

that can add enjoyment and convenience during its use. Keep these

instructions for future reference.

Table of Contents

Introduction

...............................................................

Battery Installation

...................................................

Programming the Remote

.........................................

6 7

A. Quick Set-Up

C. Standard Set-Up

Advanced Features

......................................................

8 12

A. Code Number Recall

B. Storing Multi-Commands/Favorite Channels to emory Buttons

C. Assigning Device Codes to other Device Buttons

D. Punch-Through TV Volume Control

E. Punch-Through VCR Control

Satellite key pad Information

.........................................

Hidden Buttons

..........................................................

Glossary

....................................................................

Warranty and Specifications

...........................................

Three Digit Code Lists

..................................................

15 30

A. TV Codes

B. VCR Codes

C. CATV Codes

D. SAT Codes

E. Audio Codes

F. Aux Codes

Satellite Functions by code

.............................................

31~44

Page

INTRODUCTION

The Star Light universal remote control can replace or consolidate up to six (6)

of your remote controls. It is already preprogrammed, so there is no need to

have your original remote. The Star Light universal remote works with virtually

all IR (Infrared) equipment, including : TV' s, VCR's, Cable Boxes, Satellite

Receivers, Compact Disc Players, A/V Receivers, Cassette Decks, and many other

audio /video components.

Battery Installation

The Star Light remote control is powered by four AAA batteries(included). Please

be sure to match the (+) and (-) on the batteries to the (+) and (-) marking inside

the battery compartment.

Battery Compartment Cover Removal

To remove the battery compartment, located on the rear of the remote, press down

and push forward toward the top of the remote control.

To close the battery compartment cover, slide the cover straight back until it clicks

into place.

Diagram for opening and closing of the battery cover is shown below.

Note :

When changing batteries, please replace the new batteries within ten minuites.

Otherwise, resetting of your codes may be required.

Programming the Remote

A. Quick Set-Up:

Step 1:

Turn on the device (TV, VCR,CABLE BOX, SATELLITE RECEIVER,etc .)

you wish to operate.

Step 2: On the remote control, press the corresponding

DEVICE

button

(TV, VCR, CATV

SAT, etc.)

and

MUTE

button simultaneously.

Note: SET will appear in the LCD.

Step 3:

Point the remote control toward the device. Punch in the first three digit

code number assigned to your brand from the brand code lists located on

pp.(15 30).The device will turn off when the correct code has been selected.

Step 4:

Once the device turns off, press the corresponding DEVICE button again

to store the code.

Note: LCD will flash PASS indicating that the code has been

stored.

Step 5:

Test the remote control functions with the code that was just stored.

If any of the buttons do not perform as they should, please repeat from

Step 2 using the next three digit code number for your brand of equipment.

Programming the Remote,( Continued )

C. Standard Set-Up:

Step 1:

Turn on the device ( TV, VCR, Cable Box, Satellite Receiver, etc. ) that you

wish to operate.

Step 2:

On the Star Light universal remote control, press the corresponding

DEVICE button (TV, VCR,CATV, SAT,Audio,or Aux) and the MUTE

button simultaneously.

Note: SET will appear in the LCD.

Step 3: Locate the three digit code number for your brand of equipment from the

code lists found on pp. (15 31). Example: TV codes-Sony 001,003,etc.

Note: If the brand list contains more than one code number,

select the first code listed.

Step 4: Point the remote control at the devise turned on in Step1and press in the

three digit code number selected in Step 3.

Note: SET # # # will appear in the LCD.

Your device will turn off when the correct code has been selected. If the

device fails to turn off, go back to Step 3 and select the next three digit

code for your equipment, and press in the code number.

Note: Repeat the above step until the device turns off. When

the device turns off proceed to Step 5.

Step 5: Press the DEVICE button (TV, VCR, CATV, SAT, Audio, Aux) on the

remote control to store the three digit code that turned off your equipment.

Note: PASS will flash in the LCD indicating that the code has

been stored.

Step 6: Test the remote control functions with the code just stored.

Example: Power, Channel Up, Volume Up, etc. If any of the buttons do not

perform as they should, please repeat from Step 2using the next three digit

code until the right code is found.

Step 7: To program other devices into the corresponding Device button of the

remote control, repeat the above steps with the respective devices and Device buttons.

Advanced Features

A. Three Digit Code Number Recall:

If you wish to find a code number that has been stored in your remote control,

please use the following steps:

Step 1:

On the remote control, press the DEVICE and MUTE buttons simultaneously.

Note: SET will appear in the LCD.

Step 2: Press the INPUT button. The LCD will flash the three digit code number

for five seconds before returning to its original sate.

B. Storing Multi-Commands/Favorite Channels to Memory Buttons

Memory buttons M1, M2, M3and M4can be set up to store up to six(6) commands

with one button push. Any functions, in any Device mode (except Channel up and

Channel down), can be stored in any one of the four memory buttons.

This will enable you, for example, to turn on the TV and Satellite receiver and select

a preassinged satellite channel with only one button push.

Method of setting up:

Step 1: Press the Device button (TV, VCR, CATV, SAT, AUX, AUDIO) and MUTE

button, simultaneously.

Note: SET will appear in the LCD.

Step 2:

Press one of the memory buttons(M1-M4) that you would like to designate

for multi-command or favorite channel operation.

Note: M (1-4)will appear in the LCD. The memory button

is now ready to be set up.

Step 3:

Press up to six commands that you would like to store in the memory button.

Note: Each successive selection will appear as 1~6 in the LCD.

Step 4: Press the Channel(+) button to store your selection.

Note: SAVE will flash twice and the Device mode will appear in the LCD.

Please repeat the above steps for the remaining memory buttons.

Example:

Memory button M1in the SAT mode can be set up to do the following functions: to turn on

the Satellite receiver, select channel #18 on the satellite receiver, and then turn on the TV.

Step 1:Press the SAT and MUTE buttons, simultaneously.

Note:

SET

will appear in the LCD.

Step 2

Press memory button M1.

Note: M 1will appear in the LCD.

Step 3

Press the Power buttons (to turn on the satellite receiver).

Note: M 1 1 will appear in the LCD.

Press the # 1button (to select the first digit of channel # 18)

Note: M 1 2 will appear in the LCD.

Press the # 8 button (to select the second digit of channel # 18)

Note: M 1 3 will appear in the LCD.

Press the TV Device button (to select the TV Device mode).

Note: M 1 4 will appear in the LCD.

Press the Power button (to turn on the TV).

Note: M 1 5 will appear in the LCD.

Step 4

Press the Channel (+)button to store the above commands.

Note: SAVE will flash and the current Device mode will appear.

Now, anytime the memory button M1is pressed while the remote control is in the

SAT mode, the commands to turn on the Satellite receiver, select the Satellite channel

#18 and turn on the TV, will be sent out by the remote control.

Memory buttons can be used in any combination you select.

Note: Any previously stored multi-commands on a memory button will be erased

when new multi-commands are stored to that same memory button.

C. Assigning Different Device Codes to other Device Buttons

This feature can be used to program the remote control for more than one TV, VCR,

Satellite Receiver, etc. The three digit code for any device can be stored in any of the

DEVICE buttons. For example: For two VCRs, the first VCR can be stored in the VCR

DEVICE button under normal set up procedures, and the second VCR can be

programmed into the unused CATV or any other DEVICE button.

Step 1: Turn on the device you wish to operate.

Step 2: On the remote control, press the DEVICE button you wish to assign this

device to, and the MUTE button simultaneously.

Note:

SET

will appear in the LCD.

Step 3: Press the DEVICE BUTTON that corresponds to the actual device you plan

to operate.

Note:

SET

will appear in the LCD.

Step 4: Select the three digit code number from the code list found on pp.

(15 30) for the device you will be operating

Step 5: Point the remote toward the device, and press in the three digit code

number.

Note:

SET

# # # will appear in the LCD.

Step 6: The device will turn off when the correct three digit code number has been

selected. Press the DEVICE button selected in Step 2. This will store the three

digit code into that DEVICE button.

Note:

PASS

will flash in the LCD.

Advanced Features (Continued )

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Universal Remote Control

Universal Remote Control

Universal Remote Control PHAZR-5 Manual de usuario

Universal Remote Control

Universal Remote Control R5 Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manual de usuario

Universal Remote Control

Universal Remote Control UR4U-MDVR-CHD2 - SPECS SHEET Manual de usuario

Universal Remote Control

Universal Remote Control Complete Control MRF-260 Manual de usuario

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manual de usuario

Universal Remote Control

Universal Remote Control R2-Mini Manual de usuario

Universal Remote Control

Universal Remote Control LIGHTING Manual de usuario

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manual de usuario

Universal Remote Control

Universal Remote Control UR4-P360SI Manual de usuario

Universal Remote Control

Universal Remote Control Total Control TRC-1280 Manual de usuario

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manual de usuario

Universal Remote Control

Universal Remote Control UR4-DCT Manual de usuario

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-450 Manual de usuario

Universal Remote Control

Universal Remote Control UR5-8400A Manual de usuario

Universal Remote Control

Universal Remote Control UR5-8400A Manual de usuario

Universal Remote Control

Universal Remote Control UR4-DSR - MOTOROLA DSR400 Manual de usuario

Universal Remote Control

Universal Remote Control CLIKR-5 UR5L-8520L Manual de usuario

Universal Remote Control

Universal Remote Control MX-6000 - Manual de usuario

Universal Remote Control

Universal Remote Control PHAZR-5 UR5U-9020L Manual de usuario

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manual de usuario

Universal Remote Control

Universal Remote Control Easy Clicker UR3-SR3 Manual de usuario

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación