Unitech HT650 Manual de usuario

HT650

Quick Reference Guide

HT650 Package Contents

Please ensure the following contents are in the HT650 packaging. If anything is missing or

damaged, please contact your local account manager or Unitech, Inc.

HT650 Handheld Computer

Product CD

USB Communication / Charging Cable

Battery Pack (1100mAH)

Power Adaptor & Plugs

Wrist Strap

Stylus

HT650 Front View

HT650 Rear View

Keypad

The HT650's 21-key keypad features: numeric, alpha,

function, escape, enter, scan trigger and cursor keys.

[SCAN]

Scan Trigger - Use this key to activate the barcode

scanner.

[ENT]

Enter Key - Use this key to confirm data entry.

[FUNC]

Function Key - Use this key to access function keys

shown on the keypad in orange.

 Press the [FUNC] key once to activate this state,

followed by another key.

[ESC]

Escape Key - Use this key to cancel or abort a current operation.

[ALPHA]

Alpha Key - Use this key to access the secondary layer of characters.

 Press the [ALPHA] key once to lock the keypad into Alpha state.

 Press the [ALPHA] key a second time to return to the normal state.

Install the Battery

1. Pinch the battery latches together and lift the cover from the HT650.

2. Insert the battery, from bottom first, into the battery compartment. Press down on the

battery until it snaps into place.

3. Replace the battery cover and secure it into place by sliding the latches into locking

position.

Before using the HT650, ensure that the battery is fully charged. The initial charge requires

approximately sixteen hours. Subsequent charges are completed in less than four hours.

Note：When the battery is charging, the HT650 Power LED lights red.

When charging is complete, the LED will turn green.

Charging the HT650

The battery in the HT650 can be charged using the Charging Cable or the Single-Slot USB

Cradle.

 Charging the battery with the Charging Cable

1. Plug the Charging Cable into the I/O port at the bottom of the HT650.

2. Connect the Power Supply to the Charging Cable.

3. Insert the Power Supply's plug into an electrical outlet.

 Charging the battery pack with Single Dock

a) Do not leave the battery pack inside of the Handy Terminal.

1. Plug the Power Supply into the Power Jack on the back of the Single-Slot Cradle.

2. Insert the Power Supply's plug into an electrical outlet.

3. Slide the HT650 into the cradle. When inserted properly, the HT650 Power LED will

light red to signify charging status.

b) The Single-Slot Cradle features an additional slot for charging spare batteries.

1. Insert the battery, from bottom first, into the battery compartment.

2. Press down on the battery until the battery snaps into place.

Note：When the battery is charging, the HT650 Power LED lights red.

When charging is complete, the LED will turn green.

Note:

The HT650 includes a backup battery that temporarily provides power and retains data in the

absence of main battery power. The backup battery maintains its charge by drawing power

from the main battery.

Unitech recommends frequent connection of your HT650 to an external power source to

conserve main battery power and recharge the backup battery. Always store an unused HT650

with a fully charged main battery pack.

If the main battery and backup battery are depleted, the HT650 will revert to factory default

values.

P/N 400993G Ver.0.2

http://www.ute.com/

Otros manuales para HT650

Tabla de contenidos

Otros manuales de Terminal táctil de Unitech

Unitech

Unitech HT660EBTG Manual de usuario

Unitech

Unitech TASHI MT380-A7WE0G Manual de usuario

Unitech

Unitech MT380-A9WE0G Manual de usuario

Unitech

Unitech HT650 Manual de usuario

Unitech

Unitech EA520 Manual de usuario

Unitech

Unitech Tashi MT380 Proximity Manual de usuario

Unitech

Unitech HT330 Manual de usuario

Unitech

Unitech Tashi MT380 Proximity Manual de usuario

Unitech

Unitech EA500 Manual de usuario

Unitech

Unitech HT380 Manual de usuario

Unitech

Unitech PA500 Manual de usuario

Unitech

Unitech PA970 Manual de usuario

Unitech

Unitech HT730 Manual de usuario

Unitech

Unitech MT380-A6WE0G Manual de usuario

Unitech

Unitech Tashi MT380 Proximity Manual de usuario

Unitech

Unitech PA400 Manual de usuario

Unitech

Unitech HT680 Manual de usuario

Unitech

Unitech EA630 Manual de usuario

Unitech

Unitech HT630 Guía

Unitech

Unitech Tashi Manual de usuario

Unitech

Unitech TASHI MT180 Manual de usuario

Unitech

Unitech MR350 MKII Guía de inicio rápido

Unitech

Unitech HT650 Manual de usuario

Unitech

Unitech MR350 MKII Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario

Prestel

Prestel VCS-G2PRO Manual de usuario