Unitech PA600 Manual de usuario
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
PA600 Phone Edition
Quick Reference Guide
Unitech is a member of the Oracle Embedded Software
Licensing Program.
400647G Version 1.0
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Front View
Turning the PA600 on for the First Time
Charge the PA600 for at least 16 hours prior to intial use.
Powering On
1. Press the Power Button on the PA600’s front panel to start the device.
1Status Indicator. 5Universal Connector.
2Left Scanner Trigger Button. 6Keypad.
3Power Button. 7LCD Touch-screen.
4Microphone. 8Speaker.
1
8
7
6
5
2
4
3
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Back View
9Battery Compartment. 14 Stylus.
10 Battery Compartment Release
Latch. 15 Strap Holder.
11 Reset Button. 16 Memory Card Slot.
12 Handstrap. 17 Bar Code Scanner Window.
13 Speaker.
9
10
11
13
15
14
12
16
17
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Installing the Battery
1 Access the Battery Compartment by pushing the Battery Compartment cover
Latch in the direction of the arrow and up (A). Move the Backup Battery Switch
left to the ON position (B).
2 Position the Battery so
the Battery Contacts align
with the Battery Compart-
ment Contacts. Place the
Battery on top of the Plas-
tic Tab, as shown to the
right.
3 Simultaneously slide
the Battery Pack into
the Battery Compart-
ment while pulling the
Battery Hook until the
battery snaps into
place, as shown to the
right.
4 Replace the Battery
Compartment Cover.
Compartment Contacts
Plastic Battery Tab
Battery Hook
A
Backup Battery
Switch
B
Plastic Tab
Battery Hook
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Charging the Battery
Charge the PA600 for at least 16 hours prior to initial use. After the initial charge, the
PA600 will recharge to full capacity in about 4 hours. Only use the PA600 USB Charging
Cable or the PA600 Cradle for charging the device.
1 Press and hold the USB Charging Cable’s Release Buttons while connecting to
the PA600 (1).
2 Plug the AC Adapter Cable into the USB Charging Cable’s power jack (2).
3 Plug the other end of the AC Adapter Cable into an electrical outlet (3).
3
2
1
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Using the SD/MMC memory card
1 Remove the SD Compartment Cover by rotating the screws counterclockwise
with a screwdriver as shown below:
2 Insert the SD Card with the notched end facing up and into the slot as shown
below:
3 Replace the SD Compartment Cover with the four compartment screws.
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Using the SIM card
The PA600’s GPRS SIM Card Slot is inside the Battery Compartment.
1 Remove the Battery Cover and the Main Battery. Insert the SIM Card with the
metallic gold side facing up, and with the notched corner facing right, as shown
below:
2 Push the SIM Card inside the slot until it clicks into place. Use a Stylus to push
the SIM Card Slot Lock to the right, as shown below:
Lock
E
ng
l
i
s
h
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Keypads and Function Buttons
Press FUNC to access the
function icon in the operat-
ing system.
Function Activated Icon
FUNC
Ls
ESC ghi jkl mno
wxyz
ENTER
TAB
tuvpqrs
key
OK
abc Rs def
ALPHA
1
4
7
2
5
8
0
3
6
9
.
ESC
TAB
ENTER
OK
ALPHA
key
Ls
1
ghi
4
pqrs
7
abc
2
jkl
5
tuv
8
0
Rs def
3
mno
6
wxyz
9
.
FUNC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Talk/Send.
Function.
Alpha.
End.
Turns the PA600 on and off.
Number 1, Left soft.
Alphanumeric 2, a, b, c, Up.
Alphanumeric 3, d, e, f, Right soft.
Tab, Windows Main Menu.
Backspace, Escape key.
Alphanumeric 4, g, h, i, Left.
Alphanumeric 5, j, k, l.
Alphanumeric 6, m, n, o, Right.
Alphanumeric 7, p, q, r, s, brightness-.
Alphanumeric 8, t, u, v, Down.
Alphanumeric 9, w, x, y, z, brightness+.
Asterisk, Illuminates keypad.
Number 0, space.
Period, Pound, Slash.
Enter key, OK.
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Calibrating the PA600 Screen
The calibration screen automatically appears when the PA600 powers on for the first
time, or after the system is reset.
1 Tap the target firmly and accurately.
2 Tap the target as it moves across the corners of the screen.
3 Continue tapping the target until calibration is complete.
NOTE: Tap Getting Started on the operating systems main menu to
access links to help define system settings.
English
Otros manuales para PA600
13
Tabla de contenidos
Otros manuales de PDA de Unitech
Unitech
Unitech PA500 Manual del propietario
Unitech
Unitech PA970 Manual de usuario
Unitech
Unitech PA963 Manual de instalación y operación
Unitech
Unitech EA320 Manual de usuario
Unitech
Unitech PA950 Manual de instalación y operación
Unitech
Unitech PT630 Manual de usuario
Unitech
Unitech PA820 Manual de usuario
Unitech
Unitech PA500 Manual de usuario
Unitech
Unitech HT580 Guía de inicio rápido
Unitech
Unitech PA600 II Standard Manual de usuario
Unitech
Unitech PA968 Manual de usuario
Unitech
Unitech PA768 Series Manual de usuario
Unitech
Unitech PA520BTNF Manual de usuario
Unitech
Unitech PA600 Manual de usuario
Unitech
Unitech PA960 Manual de instalación y operación
Unitech
Unitech PT630 Manual de usuario
Unitech
Unitech PA760 Manual de usuario
Unitech
Unitech PA500 Manual de usuario
Unitech
Unitech PA962 Manual de usuario
Unitech
Unitech PA600 Manual de usuario
