Unit UTD1000 Series Manual de usuario

P/N: 110401104796X

MAY.2018 REV. 3

UTD1000 User Manual

"Danger" means potential damage that is immediate.

General Safety Rules

"Warning" means potential damage that is not immediate.

"Caution"means possible damage to this product or other

This unit is designed and manufactured strictly in accordance

properties.

with GB4793 safety requirements for electronic testing meters

To avoid fire and personal injury

and IEC61010-1 safety standards. It fully meets CAT II 600V

Use a correct power cable: Use only the specified power

insulation and overvoltage requirements and Grade II anti-

cable which is authorized in the country of use.

pollution safety standards. To prevent personal injuries and

Remove the plug correctly: Do not remove the probe or

damage of this unit or any other devices connected to it,

testing cable when they are connected to power.

please take note of the following safety precautions. To avoid

Correctly connect the oscilloscope probe: After connect

potential hazards, use this unit strictly as instructed by this

the probe and the handheld digital storage oscilloscope, the

User Manual. Maintenance should only be carried out by a

probe tips connect to the oscilloscope as well as 2 channels

trained professional.

terminal well connected. After that, both of probe tips are

connected. In order to have a safety testing, the probe

Safety Messages and Symbols

grounding wire is connected with the circuit. If not connect to

Safety terminology used in this manual. The following

the ground, it needs below human being voltage fro the

messages may appear in this manual :

safety purpose.

Warning : Warning statements identify conditions or

Warnings:

practices that could result in injury or loss of life.

1. Channel A & Channel B are connected. It means both

Caution : Caution statements identify conditions or

probe tips are connected. Using the same testing point as

practices that could result in damage to this unit or other

reference, otherwise it causes short circuit or damage.

properties.

2. Probes connect to the testing point which not exceeding

Messages on the product: The following messages may

human voltage.

appear on the product :

3. For the safety purpose, USB / HOST terminal connect to Do not operate in humid condition.

the grounding tips insulted cover as our USB / HOST Do not operate in combustible and explosive

terminal connect to the grounding tips. Do not allow any conditions.

other external device to connect USB / HOST terminal. If Keep the product surface clean and dry.

fail to do that, it may cause to damage.

4. If input terminal is exceeding human voltage, please Preface

remove all the probe, test leads and accessories in order to

This manual provides information on the operation of the

avoiding any shocking.

UTD1000 digital storage oscilloscope series.Guidance

Check the rated values of all terminals : To prevent fire

is given in several chapters as follows :

and excessive current shock, please check all rated values

Chapter 1 User Guide : Simple guide to oscilloscope

and label data. Read the manual carefully and check the

functions and installation.

rated values before connecting the unit.

Chapter 2 Instrument Setups : Guide to operation

Do not operate the unit with the chassis cover open: Do

of the UTD1000 digital storage oscilloscope series.

not operate this unit when the outer cover or front panel is

Chapter 3 Practical Example Illustrations : Example

open.

illustrations are provided to solve various testing

Using an approximate power supply, it can allow to using

problems.

our certificated DC power supply

Chapter 4 System Prompts and Trouble-shooting :

Avoid exposing circuitry : When power is on, never make

Chapter 5 Servicing and Soppurt

contact with exposed adaptor or components.

Chapter 6 Appendixes

When fault is suspected, stop operation : If you suspect a

Appendix A : Technical Indicators

fault, ask a qualified maintenance professional to carry out

Appendix B : Accessories for UTD Oscilloscope

inspection.

Appendix C : Maintenance and Cleaning

Maintain good ventilation.

1000

UTD1000 User Manual

Introduction : UTD1000 Series Digital Storage Oscilloscope

Chapter 1 User Guide

1. Getting to know your UTD1000 Digital Storage Oscilloscope

2. General Inspection

3. Functional Check

4. Probe Compensation

5. Automatic Setups

6. Getting to Know the Operation Panel

Table of Contents

UTD1000 User Manual

Chapter 2 Instrument Setups

1. Resetting the Instrument

2. Using the Jog Dial Function

3. Vertical System Setup

4. Horizontal System Setup

5. Trigger System Setup

6. Display, Acquisition Modes and Automatic Measurement

7. Storage Setups and Screen Copy

8. Cursor Measurement

9. Utility Function Setup

10. Operating Maths Functions

11. Window Extension

12. Hiding the Menus

13. Using the Run Button

14. Multimeter Measurement

UTD1000 User Manual

Chapter 3 Practical Example Illustrations

Illustration 1 : Measuring simple signals

Illustration 2 : Observing the delay and distortion caused by a

sine wave signal passes through the circuit

Illustration 3 : Acquiring single signals

Illustration 4 : Reducing random noise of signals

Illustration 5 : Using cursors for measurement

Illustration 6 : Using the X-Y function

Illustration 7 : Video signal triggering

Chapter 4 System Prompts and Trouble-shooting

1. Deﬁnitions of System Prompts

2. Troubleshooting

Chapter 5 Service and Support

1. Product Program Upgrade

Chapter 6 Appendixes

Appendix A : Performance Indicators

Appendix B : Accessories for UTD1000 Oscilloscope

Appendix C : Maintenance and Cleaning



UTD1000 User Manual

Introduction : UTD1000 Series Digital Storage Oscilloscopes

UTD1000 Oscilloscopes offer user-friendliness, outstanding technical indicators and a host of advanced features. They

are your perfect tools to complete testing tasks swiftly and efﬁciently.

This manual is a user guide for 7 models of this digital storage Oscilloscope series :

Model Bandwidth Sampling Rate Display

UTD1025C 25MHz 250MS/s Color

UTD1042C 40MHz 250MS/s Color

UTD1062C 60MHz 250MS/s Color

UTD1082C 80MHz 500MS/s Color

UTD1102C 100MHz 500MS/s Color

UTD1152C 150MHz 1GS/s Color

UTD1202C 200MHz 1GS/s Color



UTD1000 User Manual

UTD1000 Oscilloscopes offer a user-friendly front panel with clear indications to allows access to all basic functions

for easy operation. The scaling and position buttons for all channels are optimally arranged for direct view operation.

As design is based on the controls of traditional instruments, users can use the new units without spending

considerable time in learning and familiarizing with operation. For faster adjustment to ease testing, there is an

[AUTO] key to instantly display the appropriate waveform and range position. Apart from being extremely user-friendly,

UTD1000 Oscilloscopes have the high performance indicators and superb functions required for speedy execution

of measurement tasks. The strong trigger and analytical functions make it easy to acquire and analyse waveforms,

while the sharp and clear LCD and mathematics functions ensure clear observation and reliable analysis of signal

conditions.

The performance features listed below will explain why the UTD1000 series can fully satisfy your testing and

measurement requirements :

● Dual channels; vertical deﬂection width range : 5mV/div – 50V/div

● Automatic waveform and status conﬁguration

● Storage of waveforms, setups and interfaces; waveforms and setups reproduction

● Screen copy function

● Fine window extension; precise analysis of waveform details and overview

● Automatic measurement of 27 waveform parameters

● Cursor measurement function

● Unique waveform recording, storage and replay function

● USB interface that supports USB2.0

● HD color 5.7 inch LCD panel at 320 x 240 pixel aspect ratio





UTD1000 User Manual

● Built-in FFT

● Multiple waveform mathematics functions (including add, subtract, multiply and divide)

● Edge, video, pulse width, and alternate trigger functions

● Multimeter function

● SB drive system software upgrade

● Multilingual menu displays

● Help messages in English and Chinese

UTD1000 accessories :

● 2 x 1.2m, 1:1/10:1 probe. For details refer to the probe instructions. These accessories conform with EN61010-031:

2008standards

● Power line conforming to international standards applicable in the country of use

● User Manual

● 2 x current-to-voltage converter module; UT-M03/UT-M04

● Test lead

● DC adaptor

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Unit

Unit

Unit UTD2000CEX+ Series Manual de usuario

Unit

Unit UPO1000CS Series Manual de usuario

Unit

Unit UT581 Manual de usuario

Unit

Unit UT673A Manual de usuario

Unit

Unit UT313 Manual de usuario

Unit

Unit UT5300X+ Series Manual de usuario

Unit

Unit utd2000 Manual de usuario

Unit

Unit UT527 Manual de usuario

Unit

Unit UTD1000L Series Manual de usuario

Unit

Unit UTD2025 series Manual de usuario

Unit

Unit UT581 Manual de usuario

Unit

Unit UT12A Manual de usuario

Unit

Unit UT512 Manual de usuario

Unit

Unit UT90C Manual de usuario

Unit

Unit UT522 Manual de usuario

Unit

Unit MSO2000 Series Manual de usuario

Unit

Unit UT677A Manual de usuario

Unit

Unit UPO2000E Series Manual de usuario

Unit

Unit UTD4000 Series Manual de usuario

Unit

Unit UT522 Manual de usuario

Unit

Unit MSO/UPO2000 Series Manual del propietario

Unit

Unit UT261 Series Manual de usuario

Unit

Unit UT5583 Manual de usuario

Unit

Unit UT590 Series Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario