Uniden UH5040R Manual de usuario
UH5040R
UHF CB Transceiver
For more exciting new products please visit our website:
Australia: www.uniden.com.au
Introduction 3
Features 3
Preventive Maintenance 4
Troubleshooting 4
Controls / Connectors 5
Indicators 6
Included with Your UH5040R Transceiver 7
Optional Accessories 7
Slide Mount Bracket 8
Mounting the MIC Hanger 10
Operation 11
Turn ON the Power and Set the Volume 11
Setting the Squelch 11
Monitor 12
Selecting a Channel 12
Set the LCD Dimmer 12
Transmitting 13
Call Function 13
Using Repeater Channels 14
Operating the UH5040R in Duplex Mode 15
Scanning 15
Open Scan (OS) Mode 16
Group Scan (GS) Mode 17
Programming Scan Channels 18
Selecting the Call tone 18
Busy Channel Lockout 19
Roger Beep 19
Programming the Instant Priority Channel 20
Recalling the Instant Channel 20
CTCSS (Continuous Tone Coded Squelch System) 20
DCS (Digitally Coded Squelch) 20
UHF CB Channel Guidelines 21
UHF CB Channels & Frequencies 22
CTCSS codes table 24
DCS codes table 25
Warranty 26
Contents
2
UNIDEN UH5040R UHF CB Transceiver
The Uniden UH5040R is designed to provide you with years of trouble free service. Its
rugged components and materials are capable of withstanding harsh environments.
Please read this Operating Manual carefully to ensure you gain the optimum
performance of the unit.
NOTE
The citizen band radio service is licenced in Australia by ACMA
Radio-communications (Citizen Band Radio Stations) Class Licence and in
New Zealand by MBIE General User Licence for Citizen Band Radio and
operation is subject to conditions contained in those licenses.
Introduction
3
UNIDEN UH5040R UHF CB Transceiver
Features
• Narrow Band (NB) 80 Channel
Radio*
• Transmission Power 5W
• Built-in AVS Circuitry†
• LCD Display with Backlight/
Dimmer
• Signal Strength Meter
• RF Power Meter
• Instant Channel
• One touch Instant Channel
recalling
• Duplex Capability (from CH01
- CH08 and CH41 - CH48 per
channel)
• Group Scan and Priority Channel
Watch
• Open Scan
• Scan Channel Memory On/Off
separately with Open Scan,
Group Scan
• +12V to +24V DC Power Input
• Rotary Channel Select
• Busy Channel Lock-out Function
• Roger Beep Function On/Off
• 5 Different Call Tones
• 38 Built-in CTCSS (Continuous
Tone Coded Squelch System)
and 104 additional DCS (Digital
Coded Squelch) codes that are
user selectable
• Variable Squelch Level adjust
• Volume Control with Power On/
Off Switch
* Refer to p.21 - p.25 for channel
information
†AVS - Automatic Volume Stabilizer
detects and manages incoming
audio to comparable levels.
Introduction
4
UNIDEN UH5040R UHF CB Transceiver
Preventive Maintenance
The following system checks should be made every six to twelve months:
• Check the Standing Wave Ratio (SWR).
• Inspect the tightness of all electrical connections.
• Inspect the antenna coaxial cable for wear or breaks on the shielding.
• Inspect the tightness of all screws and other mounting hardware.
Troubleshooting
Should the unit malfunction or perform poorly, follow these procedures:
If the transceiver is completely inoperative: Check the power cord and fuse.
If there is trouble with receiving: Check the VOLUME control setting. Be sure the
SQUELCH is adjusted properly. Possibly the radio is over-squelched.
If there is trouble with transmitting: Check that the transmission line (coaxial cable)
is securely connected to the ANTENNA connector. Check that the antenna is fully
extended for proper operation. Check that all transmission line (coaxial cable)
connections are secure and free of corrosion.
NOTE
Blackening may occur on the Liquid Crystal Display if the UHF CB
Radio has been subjected to extreme high temperature (above
60°C). This is not a fault. Normal LCD operation resumes when the
temperature stabilizes back to standard operating condition (0-55°C).
UH5040R
1 3
56
4
2
710 118 9 12
1Liquid Crystal Display (LCD)
2Rotary Channel Selector
3On/Off Volume & Squelch
4Push to Talk (PTT) Switch
5Call Button
6Instant Button
7Menu/Enter - Select Button
8SCAN - Scan On/Off
OS/GS - Open Scan/
Group Scan
9DIM - Backlight Dimmer
10 MEM - Memory Scan Channels
11 MON - DCS/CTCSS - Monitor
and DCS/CTCSS Tone button
12 DUP - Duplex On/Off
13 UHF Antenna Connection
14 External Speaker Jack
15 Power Input (13.8V DC)
13
14
15
Controls & Connectors
5
UNIDEN UH5040R UHF CB Transceiver
1 32 4 5 6 7
16
14
15
12 10 9 81113
1TX - Transmit
2MON - Monitor
3BUSY - Receiving
4 INST - Instant Channel
5MEM - Memory Scan
Channel
6DCS - Digital Coded
Squelch System
7CTCSS - Continuous Tone
Coded Squelch System
8S/RF - Receive Signal or
Transmit RF Power Level
Meter
9- DCS/CTCSS Code
number
10 - Channel Number
11 BCL - Busy Channel Lockout
12 ROGER - Roger Beep
13 GS - Group Scan
14 CALL - Call Tone
15 SCAN - Scan Mode
16 DUP - Duplex
Indicators
6
UNIDEN UH5040R UHF CB Transceiver
Optional Accessories
Included with your UH5040R Transceiver
7
UNIDEN UH5040R UHF CB Transceiver
Standard Microphone Owners Manual Microphone Hanger
with Screws/Washers
Mounting Bracket,
Mounting Screws, Washer
Stars And Screws
Slide Mount Bracket,
Guide Rails and Screws
DC Power Cord with fuse
UH5040R
UHF CB Transceiver
For more exciting new products please visit our website:
Australia: www.uniden.com.au
• UHF Antenna
• External Speaker
• DIN Mounting Kit (DMK8990)
Visit the UH5040R page on the website for more information on the availability of
optional accessories:
www.uniden.com.au for Australia
Slide Mount Bracket
How to attach Slide Mount Bracket?
When you unpack the box, ensure that you have the slide mount bracket, guide rails
and the screws.
Align the guide rails along the side of the base and insert them into the slots provided.
Then use the screws to lock them securely in position.
8
UNIDEN UH5040R UHF CB Transceiver
Slide Mount Bracket
Slide the bracket along the guide rails to attach the bracket to the unit.
Under the BASE unit
Over the BASE unit
9
UNIDEN UH5040R UHF CB Transceiver
10
UNIDEN UH5040R UHF CB Transceiver
The Microphone Hanger comes in two parts. How and where you mount the MIC
hanger will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the MIC Hanger only.
Locate a suitable mounting position and mark
and drill two 3mm holes.
Fix the MIC Hanger into place with screws.
Conventional Mounting with Double Sided Tape (not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the MIC Hanger using the supplied binding screws.
Locate a suitable mounting position.
$SSO\KLJKTXDOLW\'RXEOH6LGHGWDSHRQWRWKHÀDWDUHDRIWKH0,&+DQJHUEDFNSLHFH
DQGWKHQSUHVV¿UPO\WRWKHPRXQWLQJSRVLWLRQ
Mounting the Mic Hanger
Tabla de contenidos
Otros manuales de Transceptor de Uniden
Uniden
Uniden UH8050S Manual de usuario
Uniden
Uniden UH037SX-2NB Manual de usuario
Uniden
Uniden PRESIDENT JACKSON Manual de usuario
Uniden
Uniden BearCat PC78XL+ Manual de usuario
Uniden
Uniden UH820 Series Manual de usuario
Uniden
Uniden 2080 Manual de usuario
Uniden
Uniden UH043SX-2NB Manual de usuario
Uniden
Uniden MHS245 Manual de usuario
Uniden
Uniden JACKSON Manual de usuario
Uniden
Uniden UH755 Series Manual de usuario
Uniden
Uniden UH7760NB Manual de usuario
Uniden
Uniden XTRAK40 Manual de usuario
Uniden
Uniden Jackson UT-547C Manual de usuario
Uniden
Uniden Cell Phone Manual de usuario
Uniden
Uniden Sundowner UH-077 Manual de usuario
Uniden
Uniden UH6000 Manual de usuario
Uniden
Uniden UH400SX Manual de usuario
Uniden
Uniden PRO5050 Manual de usuario
Uniden
Uniden UH078SX-NB Manual de usuario
Uniden
Uniden UH9000 Manual de usuario
