Uniden UDW20553 Manual de usuario

If any items are missing or damaged, contact our Customer Care Line immediately.

Never use damaged products!

Need Help? Get answers 24/7 at our website: www.uniden.com.

If You... Contact Uniden’s... Phone Number

have a question or problem Customer Care Line* 817-858-2929 or 800-297-1023

need a replacement part or accessory Parts Department* 800-554-3988

need special help due to a disability Accessibility Help Line 800-874-9314 (voice or TTY)

* During regular business hours, Central Standard Time. Visit our website for detailed business hours.

UDW20553 Video Surveillance

System User’s Manual

UDW20000 receiver with

7‑inch color display and

remote control

UDWC25

wireless

weatherproof camera

UDWDC23

wireless

indoor camera

Accessory details are listed on page 2.

What's in the box?

Accessory

One Per

Receiver Outdoor

Camera

Indoor

Camera

Software CD X

Remote Control X

AV Cable X

USB Cable X

Extension Cord

Camera Stand

X X

AC Adapter X X X

Important Safety Instructions!

This manual contains important information about this product’s operation. If you are installing this

product for others, you must leave this manual or a copy with the end user.

When using your equipment, always follow basic safety precautions to reduce the risk of re, electric shock and

injury to persons, including the following:

►This equipment is NOT waterproof. DO NOT expose it to rain or moisture.

►DO NOT immerse any part of the product in water. Do not use this product near water, e.g., near a bath tub,

wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

►To avoid any risk of electric shock from lightning, avoid handling any electronic devices (except battery

powered ones) during an electrical storm.

►Use only the power cord and/or batteries indicated in this manual. Never dispose of any batteries in a re:

they may explode. Check with local codes for possible special disposal instructions.

►Never tug or pull on any power cord: be sure to leave some slack in the cord when placing your equipment,

and always use the plug to unplug cord from the wall outlet.

►Never leave power cords where they can become crushed, cut, or frayed; when running power cords, avoid

letting them rub against any sharp edges or lie across any high trac areas where people might trip.

►Do not use the device if the adapter cords or plugs have been damaged, the unit has been exposed to

liquids, or the unit has been dropped or is damaged.

Warnings to Parents and Other Users

Failure to follow these warnings and the assembly instructions could result in serious injury or death. This

product is not designed or intended for use as a medical monitor, nor should this product be used as a

substitution for medial or parental supervision. Always be sure that both the transmitter and receiver are

working properly and are within range of each other.

►STRANGULATION HAZARD. Keep the adapter cords out of the reach of children.

►WARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy and is not intended for use by

any children under the age of 13. If you are between the ages of 13 and 18, review these terms, conditions

and safety warnings with your parents or guardian to make sure that you and your parent or guardian

understand these terms, conditions, and safety warnings.

►Allow for proper ventilation when units are in use. Do not cover the camera or receiver with any object such

as a blanket. Do not place it in a drawer or in any location which would mue the sound or interfere with

the normal ow of air.

SAVE THESE INSTRUCTIONS!

For best results:

To avoid damage to your equipment, follow these simple precautions:

►Do not drop, puncture or disassemble any part of the equipment. There are no user‑serviceable parts inside.

►Do not expose the equipment to high temperatures, and avoid leaving the equipment in direct sunlight for

more than a few minutes. Heat can damage the case or electrical parts.

►Do not place heavy items on top of the equipment or expose the equipment to heavy pressure.

►Remove the power adapter during long periods between usages.

►Clean only with a dry cloth.

Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes

no liability for damages to property or injury to persons caused by improper handling or failure to

comply with these safety instructions.

Contents

Important Safety Instructions! ........2

Warnings to Parents and Other

Users .................................................... 3

For best results: .................................... 3

Getting Started .................................5

Connect the Power.................................... 5

Connect the receiver.......................... 5

Connect the outdoor camera .........5

Connect the indoor camera............. 6

Check the Video Signal ............................6

Get to Know the Outdoor Camera .......8

What the lights mean......................... 8

Using the Camera Stand.......................... 8

Switch the bracket .............................. 9

Mount the stand .................................. 9

Attach the camera.............................10

Adjusting the Sun Shield.......................10

Get to Know the Indoor Camera.........11

Using the camera mount................12

What the buttons do........................13

What the lights mean.......................14

What the connections do...............14

Using the Menu.........................................15

Using Zoom Mode ...................................16

Pan and tilt in zoom mode.............16

Understanding Night Vision.................16

Connecting to Your TV...........................17

Reducing pixellation ........................17

Multiple Camera Features............. 18

Pairing Cameras........................................18

Some things to know about

pairing cameras:.............................18

Changing to a Dierent Camera.........19

Setting Up a Scan .....................................20

Using Quad Display .................................21

To enter quad display ......................21

To exit quad display .........................21

Solving Problems........................... 22

Unstable or Weak Signal........................23

Weak signal and video

performance....................................23

Noise or Static............................................24

Resetting Your System ...........................25

Additional Information................. 25

Product Specications............................25

Polymer-Lithium Battery

Warning ...................................... 27

FCC Compliance Information ....... 27

Part 15 Compliance Statement ....27

RF Exposure Information ................28

IC Compliance Information........... 28

Radio Equipment Notice.................28

CE Compliance Information.......... 28

One-year Limited Warranty.......... 28

Getting Started

Connect the Power

Connect the receiver

Connect a standard AC adapter to the receiver’s power input.

Connect the outdoor camera

1. Attach an antenna to the rear of each camera

and connect an AC adapter to the camera’s

power input pigtail. (If necessary, connect the

extension cord to the camera’s pigtail and

connect the AC adapter to the extension cord.)

2. Connect the other end of each adapter to a 120

volt AC (standard indoor) power outlet, and

press the

POWER

button on the front of the

receiver or on the remote control.

Registration Name:

Registration Code:

Antenna

AC Adapter

Power status

lights

POWER

button

Connect the indoor camera

1. Connect one end of the small barrel AC adapter to the camera’s

power connector and the other end to a standard 120 volt AC

outlet.

2. Press the

POWER

button on the camera; the Power status light

should turn on. If it doesn’t, try reconnecting the AC adapter,

and make sure the power outlet isn’t controlled by a wall switch.

If... Try...

a Power

status light

doesn’t

come on

- reconnecting the AC adapter

- seeing if the power outlet is

controlled by a wall switch

Check the Video Signal

As soon as the receiver powers on, it

detects the camera and shows the

video on the display. The icons at the

top of the screen tell you what’s

going on with the camera and

receiver.

The table below shows the different

status icons and what they mean.

Since the icons appear based on the

state of the camera and receiver, you

won’t see all of these icons at the

same time.

LINK

POWER

Power

connector

Link

status

LINK

Antenna

Stand

Lens

Battery

status

Power

status

Signal status Channel status

Icon What it means

The signal from the camera is 1-low, 2-fair, 3-good, or 4-strong.

There is no signal from the camera.

The video currently on the display comes from the camera connected

to channel 1, 2, 3, or 4.

The video is currently zoomed in.

If... Try...

the signal status icon shows no bars

or the display says

No Signal

- making sure the camera is turned on

- re-pairing the camera and receiver (see page 18)

the signal status icon shows one or

two bars or the video quality is poor see page 23 for tips on improving video quality

there is a lot of static on the receiver see page 24 for tips on avoiding interference

Learning Your System

Get to Know the Outdoor Camera

Front view Back view

Lens

Link

status

Power status

Grooves

for sun

shield

Sun shield

Power connector

pigtail

Antenna

connector

Pairing

button

Bracket

screws

Mounting

bracket

What the lights mean

Light State What it means

Power

status

On The camera is on.

Off The camera is off.

Link

status

Flashing The camera is in pairing mode.

Green The camera is connected to the receiver.

Off The camera is in standby.

Using the Camera Stand

You can mount the camera with the stand on the bottom (on a wall

or table‑top) or on the top (on the ceiling).

When you are positioning the camera, you might want to bring

the receiver along; it’s much easier to get the camera into the right

position when you have the display handy.

Camera

brace

Mounting

screw

Mounting

post

Post

lock

Screw

holes

Switch the bracket

If you want to mount the

camera in a hanging

position, you’ll need to flip

the bracket to the top of

the camera:

1. Remove the bolts

on the side of the

mounting bracket.

2. Carefully slide the

bracket off of the

camera and sun shield.

3. Rotate the bracket 180°

and slide it back onto

the camera.

4. If necessary, adjust the

camera angle, then

replace and tighten the

bolts.

Mount the stand

1. Hold the base of the camera stand

where you want to mount it, and

mark the location of the screw

holes.

2. Use the included screws and

anchors to attach the base to the

wall or ceiling.

3. Before attaching the camera, tug

gently on the stand to make sure it

is securely in place.

Remove the bolts

and slide the mounting

bracket off of the camera.

Flip the bracket upside

down and slide it back

onto the camera.

Adjust the camera to

the desired angle

and replace and

tighten the bolts.

Attach the camera

1. Attach the camera bracket to the mounting screw.

Tighten it a few turns, then turn the camera to face the

direction you want.

2. Tighten the camera brace

up against the bracket to

secure it into place.

3. Unlock the mounting post

by turning the wingnut to the

left a few turns.

4. Set the mounting post to

the correct angle, then tighten

the wingnut until the post is

locked into place.

Adjusting the Sun Shield

If there is too much glare in the outdoor camera, you can move the sun shield forward to provide

more shade for the lens. If the top of the picture is cut off, try moving the sun shield back.

To adjust the sun shield, loosen the bolts on the side of the mounting bracket (see page 9). Slide

the sun shield forward or back, then check the picture in the receiver display. When the picture is

satisfactory, tighten the bolts again.

Loosen the

wingnut to

unlock the

mounting

post.

Attach the camera

to the mounting

screw and turn it

to the desired

direction.

Adjust the post to

the correct angle,

then tighten the

wingnut to lock the

post into place.

Tighten the brace against

the camera to

secure it

in place.

Otros manuales para UDW20553

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de seguridad de Uniden

Uniden

Uniden GDVR 43 Series Manual de usuario

Uniden

Uniden GDVR 4A Series Manual de usuario

Uniden

Uniden GSHC1000 Series Manual de usuario

Uniden

Uniden wdvr42hdd Manual de usuario

Uniden

Uniden UDW-10003 Guía del usuario

Uniden

Uniden G14xx Series Manual de usuario

Uniden

Uniden G2701 Manual de usuario

Uniden

Uniden UDVR45x4 Manual de usuario

Uniden

Uniden WDVR4-2 HDD Manual de usuario

Uniden

Uniden Guardian UDRC57 Manual de usuario

Uniden

Uniden BC6440D Manual de usuario

Uniden

Uniden GDVR 42 Series Manual de usuario

Uniden

Uniden G17xx Series Manual de usuario

Uniden

Uniden G1410 Manual de usuario

Uniden

Uniden UDW20055 Manual de usuario

Uniden

Uniden Guardian G455 Manual de usuario

Uniden

Uniden UDW20553 Guía del usuario

Uniden

Uniden Guardian G455 Manual de usuario

Uniden

Uniden GDVR 20 Series Manual de usuario

Uniden

Uniden B6440D Manual de usuario

Uniden

Uniden UDW10055 Manual de usuario

Uniden

Uniden Guardian B6440D1 Manual de usuario

Uniden

Uniden UDRC24 Manual de usuario

Uniden

Uniden UDW20553 Manual de servicio

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario