Ultenic D7 Manual de usuario
D7
Contents
English 1-15
16-30
Français
31-45
Italiano
46-60
Deutsch
61-75
Español
91-105
Pусский
Polski 76-90
Important Safety Instructions
To reduce the risk of injury or damage, keep these safety precautions in mind when setting up,
using and maintaining your robot vacuum cleaner:
Read all safety and operating instructions before operating your robot.
Retain the safety and operating instructions for future reference.
Pay attention to all warnings on your robot, battery, charging dock in the user manual.
Follow all operating instructions.
The external cable or cord of the power supply unit can not be replaced; if the cord or plug is
damaged, the power supply unit shall be disposed of.
This product is designed to be plugged into a standard outlet only. Product may not be used
with any type of power converter. Use of power converters will immediately void the warranty.
Please charge and remove the battery from your robot and accessories before long-term
storage or transportation.
The battery must be removed from this device before this device is disposed of. To remove the
battery from this device, first remove the screws on the bottom, then remove the main PCB and
unscrew the battery cover by using a screwdriver. Remove the battery by disconnecting the
quick connector.
WARNING: Chemical Exposure: If the battery pack is leaking, do not allow the liquid to come in
contact with skin or eyes. If contact has been made, wash the affected area with copious
amounts of water and seek medical advice. Place the battery (the used battery pack included
when the robot will be disposed) in a sealed plastic bag and dispose of safely according to local
environmental regulation.
WARNING: Fire or Explosion Hazard: Do not crush or dismantle battery packs. Do not heat or
place the battery pack near any heat source or direct sunlight. Do not incinerate or short-circuit
the battery pack. Do not subject batteries to mechanical shock.
Contact your local waste management authority for battery recycling and disposal regulations
in your area.
Your robot is not a toy. Do not sit or stand on robot. Children and pets should be supervised
when your robot is operating.
Robot is for indoor use only.
Do not use non-rechargeable batteries. Use the rechargeable battery provided with the product
only. For replacement, purchase identical robot batteries or contact Ultenic Customer Service
Center for alternative battery options.
Store and operate the robot in a room with moderate temperature only.
Do not spray or pour liquids on your Robot.
Do not use any other power supply cord. For replacement cords, please contact Ultenic
Customer Service Center to ensure proper selection of country-specific power supply cord.
Do not use the robot to pick up sharp objects, glass, or anything that is burning or smoking
Do not immerse the battery pack in any liquid.
Do not use the robot to pick up spills of water bleach, paint, or other chemicals, or anything
wet.
Picking up objects like clothing, loose papers, pull cords for blinds or curtains, power cords,
and any fragile objects before using the robot. If the robot passes over a power cord and drags
it, objects on table or shelf are likely to fall off.
If the room to be cleaned contains a balcony, a physical barrier should be used to prevent
access to the balcony and ensure safe operation.
Do not place anything on top of your robot.
Be aware that the robot moves on its own. Take care when walking in the area that the robot is
operating in to avoid stepping on it.
Do not operate the robot in areas with exposed electrical outlets on the floor.
Do not use this device on an unfinished, unsealed, waxed or rough floor. It may cause damage
to the floor and this device. Use only on hard floor surfaces or low pile carpets.
This device has been designed to be used on floors without scratching them. We still
recommend that you test this device on a small area of the room to be cleaned to ensure no
scratches are made before cleaning the whole room.
Battery and Charging Information
Important: Lithium-ion batteries and products that contain Lithium-ion are subject to stringent
transportation regulations. If you need to ship this product (with the battery included) for service,
travel or any other reason, you MUST comply with the following shipping instructions:
Remove the Lithium-ion battery from the product.
Place a piece of tape over the battery's metal charging contacts.
Reinstall the battery (with the tape on it) in the product and secure the battery door.
Package the product in its original packaging or in your own packaging that prevents any
movement during transportation.
Ship via ground transportation only (no air shipping).
The symbol on the product or its packaging indicates:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local authority for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into
the groundwater and get into the food chain, damaging your health and well-being. Please
contact your local or regional waste authority for more information on collection, reuse and
recycling programs.
If storing robot off the charging dock, remove the battery first. Then store robot and the battery in
a cool, dry place.
FCC Statement
Declaration of Conformity
This product complies with the radio interference requirements of the European Community.
Hereby, we declare that the radio equipment type T2253 is in compliance with Directive
2014/53/EU.
Trademark Notice
Amazon, Echo, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.,registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
Google Home is a trademark of Google Inc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the
separation between the equipment and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4) Consult the dealer or an
experienced radio/ TV technician for help.
About Your Robot
1 x Robot Vacuum D7
1 x Side Brush1 x Washable Mop 1 x Hepa Filter
with Sponge
1 x Cleaning Brush
1 x Auto Empty Base 1 x Remote Control
with Batteries
1 x Mop Attachment
2 x Disposable Dust Bag 1 x Quick Start Guide 1 x APP User Guide 1 x User Manual
User Guide for APP
Speaker
Power button
Home button
Front infrared sensor
Bumper
1 x Boundary Strips 1 x Power Adapter
Charging contacts
Dustbin release button
Dust collection port
Air outlet
2-in-1 dustbin & water tank
Cliff detect sensors
Side brush
Omnidirectional wheel
Left wheel
Rolling brush
Right wheel
Brush cover
Buttons
• Flashing blue light: Powering on/upgrading firmware
• Solid blue light: Powered on/normal working state
• Flashing yellow light: Low battery/recharging
• Flashing green light: Charging
• Solid green light: Fully charged
• Flashing red light: Error state
• Light off: Power off/sleeping
Power button
• Long press to turn on / off
• Short press to start / pause cleaning
Home button
• Short press to start/pause recharging
WiFi Indicator
WiFi Indicator
• Flashing white light:
Configuring network
• Solid white light: Connected
Power interface
Infrared lens
Charging/Dust
collecing pole
Air outlet
LED display panel Dust collection
duct cover
Cover
Dust inlet
Seal cover
Fan filter
Dust bag handle
Dust bag
Status Indicator
• Solid green light: Collecting dust
• Flashing red light: Fan overheating/fan error/cover not
closed
Dust Bag Indicator
• Solid green light: Dust bag is full/dust duct is blocked
• Flashing red light: Dust bag is not installed /dust bag is
not installed correctly
Power Indicator
• Flashing green light: Charging
• Solid green light: Fully charged/standby
Dustbin latch
Water inlet
Dustbin release button
Dust outlet
Pre-filter
Sponge filter
HEPA filter
Washable mopping
cloth
Paste area
Mopping cloth holder
Mop attachment latch
Note:
Less than or equal to 3-6 meters
Using Your Robot
About your Auto Empty Base
The Auto Empty Base is designed to automatically empty and charge the Ultenic robot vacuum
cleaner D7. Plug the power cable into the back panel of the Base and plug the other end in a
functioning wall outlet. Place on a flat, hard surface at least 2.5 inches away from the wall.
Ensure that there is a clear space in front and both sides so that your D7 can return to Base to
recharge and empty.
Back to Home
Tabla de contenidos
Idiomas:
Otros manuales de Aspiradora de Ultenic
Ultenic
Ultenic T10 Manual de usuario
Ultenic
Ultenic T10 PRO Manual de usuario
Ultenic
Ultenic U10 PRO Manual de usuario
Ultenic
Ultenic T10 Manual de usuario
Ultenic
Ultenic D5 Series Manual de usuario
Ultenic
Ultenic U11 PRO Manual de usuario
Ultenic
Ultenic WashVac AC1 Manual de usuario
Ultenic
Ultenic U10 PRO Manual de usuario
Ultenic
Ultenic T10 Manual de usuario
Ultenic
Ultenic D5 Series Manual de usuario
