Ubiquiti UAP-Outdoor-5 Manual de usuario

5 GHz 802.11n Outdoor

Access Point

Model: UAP-Outdoor-5

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®AP.

This Quick Start Guide is designed to guide you through

installation and includes warranty terms.

Package Contents

UniFi AP Outdoor 5 Antennas (Qty. 2) Wall Mount Bracket

Metal Strap Screws

(Qty. 3)

Screw Anchors

(Qty. 3)

5 GHz 802.11n Outdoor

Access Point

Model: UAP-Outdoor-5

PoE Adapter (24V, 1A)

with Mount Bracket

Power Cord Quick Start

Guide

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is

designed for outdoor installations. It is the professional installer’s responsibility to follow local

country regulations, including operation within legal frequency channels, output power, and

Dynamic Frequency Selection (DFS) requirements.

Installation Requirements

• Pole-mounting: 7 mm socket wrench or screwdriver

• Wall-mounting: Drill and 6 mm drill bit

• Phillips screwdriver

• Shielded Category 5 (or above) cabling should be used

for all outdoor wired Ethernet connections and should be

grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit:

www.ubnt.com/toughcable

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.8 or above recommended

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v5.x or newer, available at:

www.ubnt.com/download/unifi

Network Topology Requirements

• A DHCP-enabled network (for the UniFi device to obtain an IP

address as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller v5.x (or newer) software, located either on-site

and connected to the same Layer-2 network, or off-site in

the cloud or NOC

Internet

UAP-Outdoor-5

UniFi Switch

LAN

WAN

Wired UAP-PRO

Wireless

Uplinked

UAP/UAP-LR

UniFi Cloud Key

(UniFi Controller)

UniFi Security Gateway Pro

DOWNLOADTHROUGHPUT& LATENCY DEVICESON2.4 GHZ CHANNEL

DEVICESON5 GHZ CHANNEL

UPLOADTHROUGHPUT& LATENCY

LATENCY THROUGHPUT

SPEEDTEST

msec Mbps

7 0.94 1

2.33

25 22

597

0.9 116

200+0 700+0

0.01 413

2290.2

2 118

547

ACTIVEDEVICE

WAN

Inacve 0

Pending

Inacve 0

Pending

ACTIVEDEVICES

Inacve 0

Pending

118

ACTIVEDEVICES

LAN WLAN

DEEPPACKETINSPECTIONCLIENTSDEVICES

250

200

150

100

24HRS 12HRS NOW

Avg/MaxThroughput Latency

Latency[msec]

Throughput[Mbps]

100

24HRS 12HRS NOW

Latency[msec]

Throughput[Mbps]

NetworkProtocols

StreamingMedia

Web/Web 2.0

FileTransfer

SocialNetwork

Other

Motorola

Lenovo

SamsungE

Dell

Acer

Other

WLAN

LAN

WAN

118

582GB

23.3GB

22.7GB

8.47GB

3.6GB

5.46GB

258

241

220

213

130

110

126

DEVICES

645GB

TRAFFIC

1172

CLIENTS

1 2 3 4 5 6 7 8 9 10 11

36 40 44 48 52 56 60 64

100 104 108 112 116 120 124 128

132 136 140 144 149 153 157 161 165

CURRENTSITE

Default

USERNAME

admin

Remote Access to

UniFi Controller

Sample Network Diagram

All UniFi devices support off-site management controllers. For

setup details, see the User Guide on the website:

www.ubnt.com/download/unifi

Hardware Overview

LED

Status

LED

LED Color Status

Flashing Amber Initializing.

Steady Amber Factory default, waiting to be integrated.

Alternating

Amber/Green

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Quickly Flashing

Green

Used to locate and identify a UniFi device.

When the Locate feature is activated in

the UniFi Controller software, the Status

LED will flash green. It will also display the

location of the device on the map.

Steady Green

Indicates the device has been successfully

integrated into a network and is working

properly.

Steady Green

with Occasional

Flashing

Indicates the device is in an isolated state

(all WLANs are brought down until an

uplink is found).

Ports

Main

Secondary

Main

Ethernet Port

Reset

Button

Secondary

Ethernet Port

Secondary The Secondary Ethernet port is a 10/100 Ethernet

port used for bridging.

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

Main The Main Ethernet port is a 10/100 PoE port used to

connect the power and should be connected to the LAN and

DHCP server. Power can be provided by one of the following:

• PoE Adapter (included)

• Ubiquiti Networks UniFi Switch with PoE

• Ubiquiti Networks TOUGHSwitch™

*640-00006-04*

640-00006-04

Hardware Installation

The UniFi AP can be mounted to a wall or on a pole. Perform

the steps for the appropriate installation:

Wall Mount

To mount the UniFi AP on a wall, use the included Wall Mount

Bracket, Screws, and Screw Anchors.

1. Place the Wall Mount Bracket at the desired location on the

wall, with the one screw hole pointed towards the ground.

2. Use a pencil to mark the three holes on the wall.

3. Use a 6 mm drill bit to drill the holes in the wall.

4. Insert a Screw Anchor into each hole.

5. Secure the Wall Mount Bracket to the wall with the

self-tapping Screws.

6. Align the mounting tabs on the UniFi AP with the notches

on the Wall Mount Bracket, and slide the UniFi AP down

until it locks into place.

Pole Mount

To mount the UniFi AP on a pole, use the included Metal Strap:

1. Turn the screw on the Metal Strap counter-clockwise to

open the strap.

2. Straighten out the end of the Metal Strap and slide it

through the back of the UniFi AP.

3. Wrap the Metal Strap around the pole. Use a screwdriver

to turn the screw clockwise and securely fasten the strap

to the pole.

4. Connect the two Antennas to the RP-SMA connectors.

Powering the UniFi AP

The UniFi AP can be powered by the included PoE Adapter or a

PoE switch such as a TOUGHSwitch or UniFi Switch with PoE.

1. Lift the locking tab of the Port Cover and slide the cover

down to remove it.

Main

Secondary

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ubiquiti

Ubiquiti

Ubiquiti LTU-Pro Manual de usuario

Ubiquiti

Ubiquiti airFiber AF 60 Manual de usuario

Ubiquiti

Ubiquiti UniFi AC SHD Manual de usuario

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-LR Manual de usuario

Ubiquiti

Ubiquiti Bullet AC-IP67 Manual de usuario

Ubiquiti

Ubiquiti UniFi UBB Manual de usuario

Ubiquiti

Ubiquiti BulletM2-HP Manual de usuario

Ubiquiti

Ubiquiti airFiber AF-5 Manual de usuario

Ubiquiti

Ubiquiti nano station M Manual de usuario

Ubiquiti

Ubiquiti NanoStation 5AC Loco Manual de usuario

Ubiquiti

Ubiquiti M900 Manual de usuario

Ubiquiti

Ubiquiti BulletAC-IP67 Manual de usuario

Ubiquiti

Ubiquiti AirMax AC Manual de usuario

Ubiquiti

Ubiquiti NanoBeam 5AC Gen 2 NBE-5AC-Gen2 Manual de usuario

Ubiquiti

Ubiquiti UniFi Manual de usuario

Ubiquiti

Ubiquiti UniFi AP AC Lite Manual de usuario

Ubiquiti

Ubiquiti PowerBeam PBE2ACN Manual de usuario

Ubiquiti

Ubiquiti Bullet M5 HP Manual de usuario

Ubiquiti

Ubiquiti NBE--2AC--13 Manual de usuario

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Manual de usuario

Ubiquiti

Ubiquiti airGateway-LR Manual de usuario

Ubiquiti

Ubiquiti AirCube ACB-AC Manual de usuario

Ubiquiti

Ubiquiti UAP-IW-HD Manual de usuario

Ubiquiti

Ubiquiti airFiber 24 HD Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario