Ubiquiti AirFiber AF-5XHD Manual de usuario

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 1/29



ber AF-5XHD GPS Antenna Mount External GPS Antenna

Metal Strap Z



p T



es (Qty. 2) Un



versal Bracket

IP67 Upgrade K



(Vent and Gasket) G



gab



t PoE (24V, 1A) w



Mount



ng Bracket Power Cord

Package Contents

Antenna Compat



The a



ber AF-5XHD rad



s des



gned for use w



th the follow



ng a



ber X antenna

models:

AF-5G23-S45

AF-5G30-S45

AF-5G34-S45

The AF-5XHD can also operate w



th the follow



ng RocketD



sh™ antenna models:

RD-5G30*

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 2/29

RD-5G34*

* Requ



res Un



versal Bracket (



ncluded) or AF-5G-OMT-S45 Convers



on K



t (not



ncluded).

Installat



on Requ



rements

Clear l



ne of s



ght between a



ber rad



Clear v



ew of the sky for proper GPS operat



Vert



cal mount



ng or



entat



Mount



ng po



nt:

At least 1 m below the h



ghest po



nt on the structure

For tower



nstallat



ons, at least 3 m below the top of the tower

Ground w



res – m



n. 10 AWG (5 mm ) and max. length: 1 m. As a safety precaut



on,

ground the a



ber rad



o to grounded masts, poles, towers, or ground



ng bars.

WARNING:



lure to properly ground your a



ber rad



o w



ll vo



d your

warranty.

(Recommended) 2 Outdoor G



gab



t PoE surge protectors

Note:

For gu



del



nes about ground



ng and l



ghtn



ng protect



on, follow your

local electr



cal regulatory codes.

Outdoor, sh



elded Category 6 (or above) cabl



ng and sh



elded RJ-45 connectors are

requ



red for all w



red Ethernet connect



ons.

Hardware Overv



AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 3/29



ber Antenna Connectors

GPS Antenna Connector



gnal LEDs

Used to attach RF antenna cables (not



ncluded).

Used to attach the GPS Antenna.





gnal 4

LED w



ll l



ght blue when on.

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 4/29



nk LED

GPS LED



gnal 3

LED w



ll l



ght green when on.



gnal 2

LED w



ll l



ght yellow when on.



gnal 1

LED w



ll l



ght red when on.

Bootup to a



rOS

When power



ng on, the Power, GPS, L



nk, and S



gnal 1-4 LEDs l



ght

on. Once the CPU code takes over, the GPS, L



nk, and S



gnal 1-3 LEDs turn oﬀ. The



gnal 4 LED rema



ns on to



cate the boot sequence



s underway.



ng a



ber Software

When the a



ber appl



cat



on beg



ns to boot under



rOS®, the S



gnal 4 LED goes from sol



dly on to a 2.5 Hz ash. Th



s cont



nues unt



the AF-5XHD



s fully booted.



gnal Level

Once fully booted, the S



gnal 1-4 LEDs act as a bar graph show



ng how

close the AF-5XHD



s to



deal a



ng. Th



s auto-scaled based on the l



nk range, the

antenna ga



ns, and the conf



gured TX power of the remote AF-5XHD. Each S



gnal

LED has three poss



ble states: On, Flash



ng, and Oﬀ. All S



gnal LEDs would be sol



dly



n an



deal l



nk. If the l



nk has a 1 dB loss, the S



gnal 4 LED w



ll ash; a 2 dB loss

and the S



gnal 4 LED w



ll turn oﬀ. The full bar graph LED states are shown below.

dB loss

0 -1 -2 -3 -4 -5 -6

-7 -8 -9 -10 -11 -12 -13

Oﬀ RF Oﬀ

Sync



Beacon



Reg



ster



On Operat



onal

Oﬀ No GPS Synchron



zat



AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 5/29

MGMT LED

Data LED

Power LED

Management Port

Reset Button

Data Port

Non-Operat



onal (Weak S



gnal)

On Operat



onal (Strong S



gnal)

Oﬀ No Ethernet L



On Ethernet L



nk Establ



shed

Random Flash Ethernet Act



Oﬀ No Ethernet L



On Ethernet L



nk Establ



shed

Random Flash Ethernet Act



Oﬀ No Power

On Powered On

10/100/1000 Mbps, secured Ethernet port for conf



gurat



on. In-Band Management



enabled by default



n the a



ber Conf



gurat



on Interface. When In-Band

Management



s d



sabled, the MGMT port



s the only port that can mon



tor,

conf



gure, and/or update f



rmware. Th



s port can also be used to prov



de redundant

PoE power. Default IP address: 192.168.2.20

To reset to factory defaults, press and hold the Reset button for more than 10

seconds wh



le the dev



s powered on.



gab



t PoE port for handl



ng all user traﬀ



c and power



ng the dev



ce. Default IP

address: 192.168.1.20

Installat



on Overv



We recommend that you conf



gure your pa



red AF-5XHD rad



os before s



nstallat



on.

The overv



ew below summar



zes the



nstallat



on procedure, and the subsequent

sect



ons prov



de deta



led



nstallat



nformat



on.

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 6/29

Connect the a



ber PoE Adapter to the Data port, and connect your computer to

the MGMT port.

Conf



gure the AF-5XHD.

Recommended: Install the IP67 Upgrade K



t (



ncluded) to prevent



ntrus



on by water,

dust, and



nsects.

Install a ground w



re and mount the AF-5XHD on an a



ber X or RocketD



antenna.

At the



nstallat



on s



te,



nstall the a



ber X or RocketD



sh antenna w



th the mounted

AF-5XHD rad



o (see the antenna’s Qu



ck Start Gu



de for



nstallat



nstruct



ons).

Secure the ground w



re and mount the GPS antenna.

Establ



sh and opt



ze the RF l



nk.

Connect



ng Power over Ethernet

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 7/29

WARNING:

Use only the



ncluded adapter, model POE-24V-5X-HD. Fa



lure to

do so can damage the un



t and vo



d the product warranty.



ber Conf



gurat



The



nstruct



ons



n th



s sect



on expla



n how to access the a



ber Conf



gurat



Interface and conf



gure the follow



ng sett



ngs:



reless Mode

Conf



gure one AF-5XHD as the Master and the other as the Slave.

Frequency Sett



The operat



ng Frequency must be the same on both the Master

and the Slave.

There are two methods for conf



gurat



on:



® Network Management System (preferred method)



ber Conf



gurat



on Interface (browser-based



nterface)

Conf



gurat



on Us



ng UNMS

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 8/29

1. Launch the UNMS app.

2. Opt



onal: Enable Bluetooth on your mob



le dev



ce.

Note:

By default, Bluetooth



s enabled on the AF-5XHD.

3. On the Connect



ons screen, select the AF-5XHD.

4. Enter ubnt



n the Username and Password f



elds. Select your Country and Language.

You must agree to the Terms of Use to use the product.

Note:

U.S. product vers



ons are locked to the U.S. Country Code to ensure

compl



ance w



th FCC regulat



ons.

5. On the Summary screen, tap Conf



gurat



on, and then tap W



reless.

Note:

UNMS screens shown here are from the



OS-based app. The Andro



based app d



ﬀers sl



ghtly



n appearance and operat



on.

6. Conf



gure these sett



ngs:

a. On one AF-5XHD, enable Master Mode; on the other AF-5XHD, keep the default

sett



ng (Oﬀ) for Master Mode.

b. Enter a name



n the L



nk Name f



eld. Th



s should be the same on both the Master

and the Slave.

c. Select your Country.

Note:

U.S. product vers



ons are locked to the U.S. Country Code to ensure

compl



ance w



th FCC regulat



ons.

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 9/29

d. If needed, change the Channel Bandw



dth, Frequency, Output Power (EIRP),

Antenna Ga



n, and Max TX Modulat



on sett



ngs. The Channel Bandw



dth and

Frequency should be the same on both the Master and the Slave.

e. In the Secur



ty Key f



eld, enter a comb



nat



on of alphanumer



c characters (0-9, A-

Z, or a-z).

7. Cl



ck Save Changes.

8. Conf



gure each a



ber rad



o w



th a un



que IP address for the Data port:

a. Tap Conf



gurat



on, and then tap Network.

b. For both the Data LAN Network and Management Network opt



ons:

DHCP

Have your router use DHCP reservat



on to ass



gn a un



que IP Address.

Stat



Change the IP Address, Netmask, and other sett



ngs to make them

compat



ble w



th your network.

Note:

The key



s an alphanumer



c password between 8 and 63 characters

long.

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

18.02.2020 AF-5XHD Quck Start Gude

https://dl.ubnt.com/qsg/AF-5XHD/AF-5XHD_EN.html 10/29

Conf



gurat



on Us



ng Browser-Based Interface

1. Opt



onal (



f the Data port



s used for power only):

2. Conf



gure the Ethernet adapter on your computer w



th a stat



c IP address on the

192.168.2.x subnet.

3. Launch your web browser. In the address f



eld, type the address of the port you are



ng to manage the dev



ce:

http://192.168.2.20 (Management port)

http://192.168.1.20 (Data port)

Then press enter (PC) or return (Mac).

AF-5XHD Qu



ck Start Gu



All manuals and user guides at all-guides.com

Otros manuales para airFiber AF-5XHD

Otros manuales de Punto de acceso inalámbrico de Ubiquiti

Ubiquiti

Ubiquiti PowerBeam ac ISO Manual de usuario

Ubiquiti

Ubiquiti Rocket M3 Manual de usuario

Ubiquiti

Ubiquiti airFiber AF 60 Manual de usuario

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Manual de usuario

Ubiquiti

Ubiquiti IsoStation AC IS-5AC Manual de usuario

Ubiquiti

Ubiquiti Loco5AC Manual de usuario

Ubiquiti

Ubiquiti PowerBeam m5 iso PBE-M5-300-ISO Manual de usuario

Ubiquiti

Ubiquiti NanoStatonM Series Manual de usuario

Ubiquiti

Ubiquiti LiteBeam AC GENZ Manual de usuario

Ubiquiti

Ubiquiti Bullet AC-IP67 Manual de usuario

Ubiquiti

Ubiquiti Rocket5ac PtP Manual de usuario

Ubiquiti

Ubiquiti UAP-AC Manual de usuario

Ubiquiti

Ubiquiti UniFi UAP-FlexHD Manual de usuario

Ubiquiti

Ubiquiti LTU-Lite Manual de usuario

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-400-ISO Manual de usuario

Ubiquiti

Ubiquiti BulletM2-HP Manual de usuario

Ubiquiti

Ubiquiti UniFi XG Instrucciones de funcionamiento y mantenimiento

Ubiquiti

Ubiquiti U-Installer Manual de usuario

Ubiquiti

Ubiquiti NanoBeam M5 Manual de usuario

Ubiquiti

Ubiquiti UAP-PRO UNIFI Manual de usuario

Ubiquiti

Ubiquiti UAP Manual de usuario

Ubiquiti

Ubiquiti ER-8-XG Manual de usuario

Ubiquiti

Ubiquiti UBB Manual de usuario

Ubiquiti

Ubiquiti RocketM Series Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario

Ubiquiti airFiber AF-5XHD Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas