Ubiquiti AirFiber AF 60 Manual de usuario

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 1/23

Dish Main Arm Stabilizer Arms (Qty. 2)

Mounting Bracket Screw U-Clamp

Flat Washers (Qty. 2) Lock Washers (Qty. 2) Flange Nuts (Qty. 2)

Gigabit PoE (24V, 0.5A) with

Mounting Bracket

Power Cord

Package Contents

Installation Requirements

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 2/23

Clear line of sight between airFiber AP and station

Clear view of the sky for proper GPS operation

Vertical mounting orientation

Mounting point:

At least 1 m below the highest point on the structure

For tower installations, at least 3 m below the top of the tower

Outdoor, shielded Category 6 (or above) cabling and shielded RJ45 connectors are

required for all wired Ethernet connections.

Surge protection should be used for all outdoor installations. We recommend that

you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the airFiber

radio and the other at the entry point to the building. The ETH-SP-G2 will absorb

power surges and safely discharge them into the ground.

Hardware Overview

Note: For guidelines about grounding and lightning protection, follow your

local electrical regulatory codes.

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 3/23

GPS LED

60G LED

5G LED

LAN LED

Blue

The LED will light blue when the GPS signal strength

is sufficient. This requires a minimum of three GPS

satellite connections.

Blue The LED will light blue when the 60 GHz link is ready.

Blue The LED will light blue when the 5 GHz link is ready.

Blue The LED will light steady blue when an active

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 4/23

Power LED

PoE IN

Reset Button

Ethernet connection is made to the Ethernet port and

flash when there is activity.

Flashing White Bootup in progress.

White

Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™). See “UNMS

Management”.

Blue Ready for use, connected to UNMS.

Steady Blue with

Occasional Flashing

Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Gigabit Ethernet PoE port for handling all user traffic and powering the device.

Default IP address: 192.168.1.20.

To reset to factory defaults, press and hold the Reset button for more than 10

seconds while the device is powered on. Alternatively, the device may be reset

remotely via a Reset button located on the bottom of the Gigabit PoE Adapter.

Installation Overview

We recommend configuring both airFiber radios (Access Point and Station) before site

installation. Follow the instructions in “Configuration” for each radio.

Configuration

Connecting Power over Ethernet

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 5/23

Configuring the Settings

The device is set to DHCP by default, so it will try to automatically obtain an IP address.

If that fails, it will use the default fallback IP address, 192.168.1.20. Proceed to the

appropriate section, “DHCP” or “Fallback IP Address”:

DHCP

Use one of the following methods:

Set up the DHCP server to provide a specific IP address to the device based on its

MAC address (on the label).

Let the device obtain an IP address and then check the DHCP server to see which IP

address was assigned.

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 6/23

1. Launch your web browser. Type the appropriate address in the address field.

Press enter (PC) or return (Mac).

2. Select your Country and Language. You must agree to the Terms of Use to use

the product. Click Continue.

3. Enter a Username and Password, confirm the Password, and click Save.

4. Click the icon.

5. Configure the following settings:

a. For one airFiber radio, enable Access Point mode. For the other airFiber radio

(the Station), keep Access Point disabled.

b. Enter a name in the SSID field. This must be the same on both the AP and the

Station.

c. In the WPA2 Preshared Key field, enter a combination of alphanumeric

characters (0-9, A-Z, or a-z).

6. Click Save Changes.

Note: The key is an alphanumeric password between 8 and 63

characters long.

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 7/23

7. Configure each airFiber radio with a unique IP address:

a. Click the icon.

b. Review the Network settings to ensure that each airFiber radio has a unique IP

address. Each can get its IP address via DHCP, or use a static IP address.

DHCP By default DHCP client is enabled; if there is a DHCP server on your

network, the airFiber radio will receive its address via DHCP.

Static IP You can disable the DHCP client and use a static IP address.

c. Click Save Changes.

Fallback IP Address

1. Ensure that your computer (or other host machine) is connected to the same LAN as

the airFiber radio.

2. Configure the Ethernet adapter on your host system with a static IP address on the

192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.20 in the address field, and press

enter (PC) or return (Mac).

4. Select your Country and Language. You must agree to the Terms of Use to use the

product. Click Continue.

5. Enter a Username and Password, confirm the Password, and click Save.

6. Click the icon.

Note: If DHCP client fails, the device will use the fallback IP address:

192.168.1.20

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 8/23

7. Configure the following settings:

a. For one airFiber radio, enable Access Point mode. For the other airFiber radio (the

Station), keep Access Point disabled.

b. Enter a name in the SSID field. This must be the same on both the AP and the

Station.

c. In the WPA2 Preshared Key field, enter a combination of alphanumeric characters

(0-9, A-Z, or a-z).

8. Click Save Changes.

9. Configure each airFiber radio with a unique IP address:

a. Click the icon.

b. Review the Network settings to ensure that each airFiber radio has a unique IP

address. Each can get its IP address via DHCP, or use a static IP address.

DHCP By default DHCP client is enabled; if there is a DHCP server on your

network, the airFiber radio will receive its address via DHCP.

Fallback IP If you use the fallback IP address on one radio, you must change

the IP Address setting on the other radio. The fallback IP address is:

192.168.1.20

c. Click Save Changes.

UNMS Management

You can manage your device using UNMS, which lets you configure, monitor, upgrade,

and back up your devices using a single application. Get started at www.unms.com

Installation

Note: The key is an alphanumeric password between 8 and 63 characters

long.

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 9/23

Optional

Attach the stabilizer arms for added support.

(This is recommended for long-range installations.)

AF60 Quick Start Guide

7/23/2020 AF60 Quick Start Guide

https://dl.ubnt.com/qsg/AF60/AF60_EN.html 10/23

AF60 Quick Start Guide

Otros manuales para airFiber AF 60

Tabla de contenidos

Otros manuales de Receptor de Ubiquiti

Ubiquiti

Ubiquiti 60G-Link Manual de usuario

Ubiquiti

Ubiquiti airFiber 11FX Manual de usuario

Ubiquiti

Ubiquiti LTU-Lite Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario

Ubiquiti airFiber AF 60 Manual de usuario

Manuales populares de Receptor de otras marcas