Ubiquiti ERLite-3 Manual de usuario

3-Port Router

Model: ERLite-3

Introduction

Thank you for purchasing the Ubiquiti Networks EdgeRouter™Lite,

model ERLite-3. It is part of the EdgeMAX™ platform. For more

information, visit www.ubnt.com/edgemax.

This Quick Start Guide is designed to guide you through the

installation of the EdgeRouter Lite and show you how to access

the EdgeOS Configuration Interface.

Package Contents

EdgeRouter Lite Power Adapter

(12V, 1A)

Power Cord

3-Port Router

Model: ERLite-3

M2.9x20 Screws

(Qty. 2)

M2.9 Anchors

(Qty. 2)

Quick Start Guide

EdgeRouter™Lite Quick Start Guide

Hardware Overview

Back Panel

12V DC

GROUND

Power

Grounding Hole with

Grounding Screw

Ventilation Holes

Front Panel Ports

CONSOLE 0 1 2

SPEED

Console ResetEthernet (0-2)

Interface Description

Console RJ45 serial console port for Command Line Interface

(CLI) management.

Ethernet (0-2) 10/100/1000 Mbps Ethernet ports.

Reset

To reset to factory defaults, disconnect the Power

Adapter from the Power port. Press and hold the

Reset button while connecting the Power Adapter

to the Power port. Keep holding the button until the

right LED on port 2 starts flashing and then stops

after a few seconds.

Hardware Overview

Front Panel LEDs

The LEDs on the left side of each port are not used at this time.

Below is a description of the right LED functionality:

CONSOLE 0 1 2

SPEED

Power Speed/Link/Act

10/100 Mbps

Speed/Link/Act

1000 Mbps

LED State Status

Console

Power

Off EdgeRouter Lite not powered on.

Green EdgeRouter Lite is powered on.

Ethernet (0-2)

Speed/

Link/Act

Off No Link

Amber Link Established at 10/100 Mbps

Amber Flashing Link Activity at 10/100 Mbps

Green Link Established at 1000 Mbps

Green Flashing Link Activity at 1000 Mbps

EdgeRouter™Lite Quick Start Guide

Hardware Installation

Mount the EdgeRouter Lite on a wall or place it on a bench top.

Note: Keep 20 mm of clearance next to the ventilation

holes for adequate airflow.

Cabling Requirements

• For indoor applications, use Category 5 (or above) UTP cabling

approved for indoor use.

• For outdoor applications, shielded Category 5 (or above) cabling

should be used for all wired Ethernet connections and should

be grounded through the AC ground of the power supply.

We recommend that you protect your outdoor networks from

the most brutal environments and devastating ESD attacks

with industrial-grade shielded Ethernet cable from Ubiquiti

Networks™. For more details, visit www.ubnt.com/toughcable

Note: Although the cabling can be located outdoors,

the EdgeRouter Lite itself should be housed inside a

protective enclosure.

Wall-Mounting

To mount the EdgeRouter Lite on a wall, you will need a drill, a

6mm drill bit, and a Phillips screwdriver.

1. Use a 6 mm drill bit to drill two holes 100 mm apart. (You can

use the template on page 16 to mark the holes.)

2. Insert the M2.9 Anchors into the holes. Use a Phillips screwdriver

to secure a M2.9x20 Screw to each anchor. Leave a clearance of

approximately 3 mm between each screw head and its anchor.

3 mm

Note: You can also mount the EdgeRouter

Lite in a vertical orientation.

Hardware Installation

3. Position the EdgeRouter Lite with the Ethernet ports facing

down. Place the Wall-Mount Slots of the EdgeRouter Lite over

the screw heads on the wall. Then slide the EdgeRouter Lite

down to lock it into place.

12V DC

GROUND

Grounding the EdgeRouter Lite (Optional)

The EdgeRouter Lite is grounded through the Power Adapter;

however, you can add optional ESD grounding for enhanced ESD

protection.

1. Loosen the Grounding Screw to secure a ground wire (not

included) to the Grounding Hole.

12V DC

GROUND

2. Secure the other end of the ground wire to a grounding block.

EdgeRouter™Lite Quick Start Guide

Connecting Power

1. Connect the Power Adapter to the Power port.

12V DC

GROUND

2. Connect the Power Cord to the Power Adapter. Connect the

other end of the Power Cord to a poweroutlet.

Hardware Installation

Accessing the EdgeOS Configuration Interface

1. Connect an Ethernet cable from the Ethernet port of your

computer to the port labeled 0 on the EdgeRouter Lite.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet (e.g., 192.168.1.100).

3. Launch your web browser. Type https://192.168.1.1 in the

address field. Press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username

and Password fields. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License

Agreement to accept it. Click Login.

The EdgeOS Configuration Interface will appear, allowing you to

customize your settings as needed.

Refer to the EdgeRouter Lite User Guide for instructions on

configuring the EdgeRouter Lite. The User Guide is available at

documentation.ubnt.com

EdgeRouter™Lite Quick Start Guide

Specifications

EdgeRouter Lite

Dimensions 197.52 x 91 x 28 mm

Weight 289.2 g

Power Input 12VDC, 1A Power Adapter (Included)

Button Reset

Processor Dual-Core 500 MHz, MIPS64

with Hardware Acceleration

for Packet Processing

System Memory 512 MB DDR2 RAM

Code Storage 2 GB

Certications CE, FCC, IC

Wall-Mount Yes

Operating Temperature -10 to 45°C (14 to 113° F)

Operating Humidity 90% Non-Condensing

LEDs Per Port

Serial Console Port Power

Data Ports Speed/Link/Activity

Networking Interfaces

Serial Console Port (1) RJ45 Serial Port

Data Ports (3) 10/100/1000 Ethernet Ports

Otros manuales para ERLite-3

Tabla de contenidos

Otros manuales de Enrutador de red de Ubiquiti

Ubiquiti

Ubiquiti ER-12 Manual de usuario

Ubiquiti

Ubiquiti UniFi US-24-250W Manual de usuario

Ubiquiti

Ubiquiti PowerBridge M3 Manual de usuario

Ubiquiti

Ubiquiti edgerouter X SFP Manual de usuario

Ubiquiti

Ubiquiti UCK-G2-PLUS Manual de usuario

Ubiquiti

Ubiquiti LTU LR Manual de usuario

Ubiquiti

Ubiquiti ToughSwitch Pro TS-80-PRO Manual de usuario

Ubiquiti

Ubiquiti UF-LOCO Manual de usuario

Ubiquiti

Ubiquiti ERLite-3 Manual de usuario

Ubiquiti

Ubiquiti EdgePoint R8 Manual del operador

Ubiquiti

Ubiquiti TS-8-PRO Manual de usuario

Ubiquiti

Ubiquiti ROcket M5 Manual de usuario

Ubiquiti

Ubiquiti AiAF-5 Manual de usuario

Ubiquiti

Ubiquiti Amplifi AFi-LR Manual de usuario

Ubiquiti

Ubiquiti UniFi Security Gateway PRO Manual de usuario

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manual de usuario

Ubiquiti

Ubiquiti UFber loco Manual de usuario

Ubiquiti

Ubiquiti edgepoint r6 Manual de usuario

Ubiquiti

Ubiquiti EdgeRouter LITE Manual de usuario

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manual de usuario

Ubiquiti

Ubiquiti airCube Manual de instrucciones

Ubiquiti

Ubiquiti AFi-ALN Manual de usuario

Ubiquiti

Ubiquiti ER-4 Instrucciones de funcionamiento y mantenimiento

Ubiquiti

Ubiquiti airCube Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad