Ubiquiti GBE Manual de usuario

GBE Ball Joint Mount Lock Ring

Metal Strap Gigabit PoE (24V, 0.5A) with

Mounting Bracket Power Cord

Package Contents

Installation Requirements

Clear line of sight between GigaBeam AP and station

Pole-mounting: 7 mm socket wrench or screwdriver

Wall-mounting: wall fastener (not included)

Shielded Category 5 (or above) cabling with drain wire should be used for all wired

Ethernet connections and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor environments

and destructive ESD events with industrial-grade, shielded Ethernet cable from

Ubiquiti. For more details, visit

ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend that

you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the device and

the other at the entry point to the building. The ETH-SP-G2 will absorb power surges

and safely discharge them into the ground.

Note:

For guidelines about grounding and lightning protection, follow your

local electrical regulatory codes.

GBE Quick Start Guide

Reset Button

Hardware Overview

GBE Quick Start Guide

PoE IN Port

60 GHz LED

5 GHz LED

LAN LED

Power/Status LED

To reset to factory defaults, press and hold the Reset button for more than 10

seconds while the device is powered on. Alternatively, the device may be reset

remotely via a Reset button located on the bottom of the Gigabit PoE Adapter.

This Gigabit Ethernet port is used to connect the power and should be connected to

the LAN and DHCP server.

Lights steady blue when 60 GHz link is ready.

Lights steady blue when the 5 GHz link is ready.

The LED will light steady blue when an active Ethernet connection is made to the

Ethernet port and ﬂash when there is activity.

Flashing White Bootup in progress.

White Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™). See

“UNMS

Management”

Blue Ready for use, connected to UNMS.

Steady Blue with

Occasional Flashing Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Hardware Installation

Go to the appropriate mounting instructions: Pole Mounting or

“Wall Mounting”

Pole-Mounting

GBE Quick Start Guide

Wall Mounting

The device must be mounted directly to a wood stud or other structurally stable

surface to avoid damage to the mounting hole when you adjust the aim.

Optional Accessory

To enhance stability, you can use the NanoBeam® Wall Mount Kit, model NBE-WMK

(sold separately).

Note:

Center screw included. Two optional screws (not included) provide

additional stability.

Installation Instructions

GBE Quick Start Guide



GBE Quick Start Guide

Fastener (not included) NanoBeam Wall Mount Kit

Aiming

Visually aim the GigaBeam radios at each other.

GBE Quick Start Guide

Connecting Power

GBE Quick Start Guide



WARNING:

The switch port must comply with the power speciﬁcations listed

“Speciﬁcations”

Optional

GBE Quick Start Guide

Otros manuales para GBE

Otros manuales de Puerta de Ubiquiti

Ubiquiti

Ubiquiti UniFi USG Manual de usuario

Ubiquiti

Ubiquiti USG Manual de usuario

Ubiquiti

Ubiquiti UniFi UDM Manual de usuario

Ubiquiti

Ubiquiti sunMAX SM-SG Manual de usuario

Ubiquiti

Ubiquiti airGateway Manual de usuario

Ubiquiti

Ubiquiti USG-PRO-4 Manual de usuario

Ubiquiti

Ubiquiti UniFi USG Manual de usuario

Ubiquiti

Ubiquiti UniFi Dream Machine Pro UDM-Pro Manual de usuario

Ubiquiti

Ubiquiti UniFi Security Gateway XG-8 Manual de usuario

Ubiquiti

Ubiquiti USG Manual de usuario

Ubiquiti

Ubiquiti UniFi Dream Machine Pro UDM-Pro Manual de usuario

Ubiquiti

Ubiquiti UDM-Pro Manual de usuario

Ubiquiti

Ubiquiti USG-PRO-4 Manual de usuario

Ubiquiti

Ubiquiti USG-PRO-4 Manual de usuario

Ubiquiti

Ubiquiti UniFi Manual de usuario

Ubiquiti

Ubiquiti Dream Machine Pro UDM-Pro Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario