Ubiquiti mFi mPort Manual de usuario
mPort
1
Introduction
Introduction
Thank you for purchasing the Ubiquiti mFi™mPort. The mFi
mPort includes the mFi Controller software that allows you
to monitor your devices using your Web browser.
Package Contents
mPort Wall-Mount
Bracket
PoE Adapter &
Power Cord
Terminal
Block
(Male)
mPort
Application Support
Windows XP
Windows Vista
Windows 7
Mac OS X
mFi Controller Software
Quick Start Guide
Version 1.0
Screws (Qty. 4) Anchors (Qty.4) Quick Start Guide CD-ROM
System Requirements
• Microsoft Windows XP, Windows Vista, Windows 7, or
Mac OS X
• Java Runtime Environment 1.6 (or above)
• Web Browser: Mozilla Firefox, Google Chrome, or
Microsoft Internet Explorer 8 (or above)
2
mFi™mPort
Hardware Overview
Front View
Power LED
Ethernet LED
Status LED
Power The Power LED will light steady green when
the mPort is properly connected to a power source.
Ethernet The Ethernet LED will light steady green
when an active Ethernet connection is made and
flash when there is activity.
Status The Status LED will light yellow when the
mPort is first powered on in factory default mode
out of the box. The Status LED will light steady green
when the mPort has been successfully integrated
into a network and is working properly. The Status
LED will flash when the Locate button is used in the
mFi Controller software.
3
Hardware Overview
Side View
mFi RJ45 Ports
mFi Terminal
Block Port
USB
Port*
Ethernet Port
Wall-Mount
Bracket
* The USB Port is reserved for future use.
4
mFi™mPort
Hardware Installation
Remove the Wall-Mount Bracket from the mPort by
pressing the Release Tabs.
Release Tabs
5
Hardware Installation
Wall-Mount (Optional)
1. Position the Wall-Mount Bracket with the Release Tabs
on top.
Release Tab Release Tab
2. To secure the Wall-Mount Bracket to the wall:
a. Use a pencil to mark the holes on the wall.
b. Use a 6 mm drill bit to drill the holes in the wall.
c. Insert the four Anchors into the wall.
d. Insert the Screws into the anchors.
6
mFi™mPort
3. Angle the mPort so that the notches on the bottom
of the Wall-Mount Bracket are inserted into the mPort.
Then press the mPort into the Release Tabs and snap
it into place.
Connecting Ethernet
1. Connect an Ethernet cable to the Ethernet port on the
mPort.
7
Connecting Ethernet
2. Connect the other end of the Ethernet cable to the
Ethernet port labeled POE on the PoE Adapter.
3. Connect an Ethernet cable from your LAN to the
Ethernet port labeled LAN on the PoE Adapter.
Note: The mFi Controller software should be
running on a system connected to the same LAN
as the mPort.
8
mFi™mPort
4. Connect the power cord to the power port on the PoE
Adapter. Connect the other end of the power cord to
a power outlet. The Power LED should light up on the
mPort.
Software Installation
Insert the mFi Controller software CD into your CD-ROM
drive and follow the instructions for your specific computer
type.
Otros manuales para mFi mPort
1
Tabla de contenidos
Otros manuales de Controladores de Ubiquiti
