Ubiquiti AGM5-HP-1114 Manual de usuario

5 GHz High-Performance

Integrated InnerFeed

Antenna

Model: AGM5-HP-1114

Introduction

Thank you for purchasing the Ubiquiti Networks airGrid™ 5GHz

High-Performance Integrated InnerFeed Antenna, model

AGM5-HP-1114. This Quick Start Guide is designed to walk you

through the installation of the airGrid.

Package Contents

5 GHz High-Performance

Integrated InnerFeed

Antenna

Model: AGM5-HP-1114

11x14" Grid Reflector Antenna Feed* Feed Support* Quick Start Guide

L Bracket Pole Clamp M6 U Bolt M6x20 Bolts

(Qty. 4)

M6 Serrated

Flange Nuts

(Qty. 2)

M6 Washers

(Qty. 4)

M6 Lock Washers

(Qty. 4)

Feed Support

Bushing*

PoE Adapter*

(24V, 0.5A)

Power Cord*

* Items marked with an asterisk may be packaged separately. Products may be

different from pictures and are subject to change without notice.

airGrid™ AGM5-HP-1114 Quick Start Guide

Installation Requirements

• 10 mm wrench

• Shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through

the AC ground of the PoE.

We recommend that you protect your networks from the

most brutal environments and devastating ESD attacks

with industrial-grade shielded Ethernet cable from Ubiquiti

Networks™. For more details, visit www.ubnt.com/toughcable

Hardware Installation

1. Attach the Feed Support and L Bracket to the Grid Reflector.

a. Orient the Grid Reflector for the appropriate polarization,

horizontal or vertical.

WARNING: The polarization of the airGrid must match

the polarization of its corresponding device (horizontal

to horizontal, vertical to vertical).

b. With the cable opening facing down, insert the Feed Support

into the Grid Reflector and L Bracket.

c. Secure the Feed Support and L Bracket to the Grid Reflector

with the four M6x20 Bolts, four M6 Lock Washers, and four

M6 Washers.

Horizontal Polarization Vertical Polarization

Hardware Installation

2. Route an Ethernet cable through the cable opening of the Feed

Support and connect it to the Ethernet port on the back of the

Antenna Feed.

airGrid™ AGM5-HP-1114 Quick Start Guide

3. Insert the Antenna Feed into the Feed Support until it locks

intoplace.

Horizontal Polarization Vertical Polarization

WARNING: The orientation of the Antenna Feed and Grid

Reflector must match the orientation required for your

signal polarization, horizontal or vertical.

4. Wrap the Feed Support Bushing around the Ethernet cable and

then push it into the cable opening of the Feed Support.

Hardware Installation

5. Attach the airGrid to the pole.

Note: The mounting assembly can accommodate a

Ø 1.25" - 2.2" pole.

a. Ensure that the cable opening of the Feed Support

facesdown.

b. Insert the M6 U Bolt into the Pole Clamp and L Bracket.

c. Secure the M6 U Bolt with two M6 Serrated Flange Nuts.

d. Tighten all nuts to approximately 14 N-m (10 lb-ft) or less to

avoid deforming the pole.

airGrid™ AGM5-HP-1114 Quick Start Guide

Connecting Power over Ethernet

1. Connect the other end of the Ethernet cable from the airGrid

to the Ethernet port labeled POE on the PoE Adapter.

2. Connect an Ethernet cable from your LAN to the Ethernet port

labeled LAN on the PoE Adapter.

3. Connect the Power Cord to the power port on the PoE Adapter.

Connect the other end of the Power Cord to a power outlet.

Accessing airOS

Verify connectivity in the airOS Configuration Interface.

1. Make sure that your host machine is connected via Ethernet to

the airGrid.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet.

3. Launch your web browser and type http://192.168.1.20 in the

address field. Press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username and

Password fields. Select your Country and Language. You must

agree to the Terms of Use to use the product. Click Login.

Note: U.S. product versions are locked to the U.S. Country

Code to ensure compliance with FCC regulations.

airGrid™ AGM5-HP-1114 Quick Start Guide

5. Click the Wireless tab. From the Antenna drop-down, select the

size of Grid Reflector you are using. Click Change to save. You

can customize additional settings as needed.

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional

installer's responsibility to make sure the device is operated within

local country regulatory requirements.

Since Ubiquiti Networks equipment can be paired with a variety

of antennas and cables, the Antenna and Output Power fields

are provided to the professional installer to assist in meeting

regulatory requirements.

Tabla de contenidos

Otros manuales de Antena de Ubiquiti

Ubiquiti

Ubiquiti AG-HP-2G20 Manual de usuario

Ubiquiti

Ubiquiti air MAX Omni Manual de usuario

Ubiquiti

Ubiquiti air Grid M2 AGM2-HP-1114 Manual de usuario

Ubiquiti

Ubiquiti airMAX AM-3G18-120 Manual de usuario

Ubiquiti

Ubiquiti airMAX Omni AMO-2G10 Manual de usuario

Ubiquiti

Ubiquiti airMAX Omni AMO-5G10 Manual de usuario

Ubiquiti

Ubiquiti RocketDish RD-5G30 Manual de usuario

Ubiquiti

Ubiquiti airMAX Omni AMO-2G10 Manual de usuario

Ubiquiti

Ubiquiti AP-5AC-90-HD Air Prism Manual de usuario

Ubiquiti

Ubiquiti airMAX airGrid M2 HP Manual de usuario

Ubiquiti

Ubiquiti AirFiber X AF-5G34-S45 Manual de usuario

Ubiquiti

Ubiquiti airMAX Sector AM-2G16-90 Manual de usuario

Ubiquiti

Ubiquiti UniFi USW-16-POE Manual de usuario

Ubiquiti

Ubiquiti airMAX RocketDish Manual de usuario

Ubiquiti

Ubiquiti GBE-LR Manual de usuario

Ubiquiti

Ubiquiti UniFi UAP-AC-M Manual de usuario

Ubiquiti

Ubiquiti RD-3G26 Manual de usuario

Ubiquiti

Ubiquiti NanoBridge M NB-2G18-HP Manual de usuario

Ubiquiti

Ubiquiti PowerBeam M PBE-M2-400 Manual de usuario

Ubiquiti

Ubiquiti AF-5G23-S45 Manual de instrucciones

Ubiquiti

Ubiquiti airMAX Omni AMO-2G10 Manual de usuario

Ubiquiti

Ubiquiti RocketDish RD-5G31-AC Manual de usuario

Ubiquiti

Ubiquiti PS-5AC Manual de usuario

Ubiquiti

Ubiquiti airMAX airGrid M5HP Manual de usuario

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario