Ubiquiti U-Installer Manual de usuario

Installer

Quick Start Guide

Hardware Overview

USB-C Port

Wi-Fi LED

PoE OUT

Port

Removable

Rubber

Casing

Battery

LEDs

Front View

Ports

PoE OUT Supplies 24V passive PoE to

the device being installed.

USB-C USB Type C port used for

charging the internal battery.

LEDs

Wi-Fi

Lights blue if the U‑Installer has

a Wi‑Fi connection to your mobile device.

Battery

Four blue LEDs indicate the

internal battery’s charge level:

Full charge

Low charge*

* Recharge the battery by connecting a power source,

such as a mobile battery pack, to the USB-C port.

Back View

Buttons

Removable

Rubber

Casing

Clip

Buttons

Reset Ext

Power

Reset

Reset Ext

To reset the device connected

to the U‑Installer to factory defaults,

press this button while the device is

powered on. Hold the button for more

than eight seconds until the LEDs on the

device flash.

Power Press to power the U‑Installer

on or off. The Battery LEDs light when

power is on.

Reset To reset the U‑Installer to factory

defaults, press and hold the Reset

button while the U‑Installer is powered

until the LEDs on the device flash.

Configure a CPE Device

Use a mobile device (default method)

or a laptop to configure the CPE device

at the point of installation via the

U‑Installer’s Wi‑Fi:

1. Power on the U‑Installer by pressing

the Power button. The Battery LEDs

light when the power is on.

Note: If the battery level is

low, connect a USB cable from

a mobile power pack or USB

charger to the USB-C port of the

U‑Installer.

2. Connect an Ethernet cable to the

PoEOUT port on the U‑Installer.

3. Connect the other end of the cable to

the CPE device.

You have two options for configuration:

the UMobile App and Web Portal.

Proceed to the appropriate instructions:

UMobile App - Default Method

1. iOS devices only: Connect your

mobile device’s Wi‑Fi to the U‑Installer

SSID named: ubi:<MAC Address>

2. Launch the UMobile app on your

mobile device.

Note: If the UMobile app is not

yet installed on your mobile

device, download it from

AppStore (iOS) or Google Play™

(Android).

3. The Connections screen appears.

4. Connect to the CPE device as follows:

iOS:

a. On the Connections screen, tap the

CPE device.

b. Tap Log in to automatically log

into the device.

Android:

a. Tap , and then tap Installer.

b. The app will automatically detect

and connect to the U‑Installer SSID

named: ubi:<MAC Address>.

c. On the Discover screen, tap the CPE

device to automatically log into

the device.

5. Follow the on‑screen instructions in

the UMobile app to configure the

connected device.

Web Portal

1. Connect your device’s Wi‑Fi to the

U‑Installer SSID named:

ubi:<MAC Address>

2. Open a web browser and go to:

https://192.168.1.20

3. The login portal of the CPE device will

appear. Log in using the appropriate

username and password.

Example Login Screen for CPE Device

4. Configure theCPE device as needed.

Removing the U‑Installer

After you have configured the CPE

device, remove the U‑Installer:

1. Disconnect the Ethernet cable from

the device.

2. Connect the Ethernet cable from a PoE

adapter or switch to the device.

Otros manuales para U-Installer

Tabla de contenidos

Otros manuales de Adaptador de Ubiquiti

Ubiquiti

Ubiquiti AIR FIBER 11FX Manual de usuario

Ubiquiti

Ubiquiti mPower mini Manual del operador

Ubiquiti

Ubiquiti mPower Manual de usuario

Ubiquiti

Ubiquiti mPort Manual de usuario

Ubiquiti

Ubiquiti UniFi Protect ViewPort Manual de usuario

Ubiquiti

Ubiquiti mPower mini Instrucciones de funcionamiento y mantenimiento

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario