Introduction
001605, Rev. A 3
Introduction
The Fusion 70 Access Point is a reliable, high-speed wireless device that
offers secure communication access for both voice and data IEEE
802.11n transmissions for any SMB (Small- to Medium-sized Business).
With a frequency of 2.4 GHz (802.11 b/g/n), this innovative and cost-
effective AP provides clients a fast and reliable network connection.
You can provide power to the access point either by using a single,
standard IEEE 802.3af PoE connection or by using direct power
connection. In addition, the Fusion 70 Access Point supports all security
suites, including both WPA and WPA2 authentication and encryption
methods.
Packaging
Fusion 70 Access Point
Power adapter (5V) and cord
Mounting kit, including mounting bracket and screws
Adhesive rubber feet
Three external antennas (optional)
Warranty card
Safety Precautions
For safe and efficient use, read the following information before working
on or using the Fusion 70.
Do not expose the product to liquid or moisture.
Do not expose the product to extreme temperature.
Do keep the product in a clean and dust-free location. Use only a soft,
damp cloth to clean the product.
Table 1 Safety Precautions
WARNING
Before working on this equipment, be aware of good safety
practices and the hazards involved with electrical circuits.
WARNING
To reduce risk of fire hazard and electric shock, do not install the
unit near a damp location.
CAUTION
To reduce the risk of fire, use only number 26 AWG or larger UL
Listed or CSA Certified telecommunication line cord for all
network and telecommunication connections.
