TYROLIT Hydrostress WSE1621 Manual de usuario
Translation of the original instructions
10999160 en / 01.10..2018
Index 000
OPERATING INSTRUCTIONS
CONTROL UNIT WSE1621
Page 2
WSE1621 Control unit
TYROLIT Hydrostress AG
Witzbergstrasse 18
CH-8330 Pfäkon
Switzerland
Tel. 0041 (0) 44 952 18 18
Fax 0041 (0) 44 952 18 00
Congratulations!
You have decided to purchase a tried-and-tested TYROLIT Hydrostress unit and have thus
acquired a highly sophisticated and reliable state-of-the-art device. Only genuine TYROLIT
Hydrostress replacement parts can guarantee quality and interchangeability. If maintenance
work is neglected or carried out inexpertly, we will be unable to honour our warranty obliga-
tions. All repairs must be carried out by trained personnel only.
Our after-sales service is available to help ensure that your TYROLIT Hydrostress units remain in
perfect working order.
We hope that working with your TYROLIT unit will be a satisfying and fault-free experience.
TYROLIT Hydrostress
Copyright © TYROLIT Hydrostress
TYROLIT Hydrostress AG
Page 3
WSE1621 Control unit
Table of contents
Page
1. 1. Safety ..................................................................... 5
1.1 What to do in an emergency ................................................ 6
2. Description ..................................................................... 7
2.1 System ..................................................................... 7
2.2 Main components .......................................................... 8
2.3 Remote controller .......................................................... 10
2.4 Connections ............................................................... 11
3. Operation ....................................................................... 14
3.1 Overview of controls ....................................................... 14
3.2 Display elements ........................................................... 15
3.3 Positioning the WSE1621P control unit ...................................... 25
3.4 Starting the WSE1621P control unit ......................................... 26
3.5 Selecting the machine system .............................................. 28
3.6 Selecting the mains power supply .......................................... 28
3.7 Tool soft start............................................................... 29
3.8 Selecting the tool station ................................................... 30
3.9 Power control .............................................................. 31
3.10 Adjusting the feed.......................................................... 31
3.11 Changing the direction of rotation of the main motor. . . . . . . . . . . . . . . . . . . . . . . . 33
3.12 Daily hour counter / stopwatch ............................................. 34
3.13 Switching o the WSE1621P control unit .................................... 35
3.15 Deactivating the EMERGENCY STOP function ................................ 36
4. Servicing and maintenance ..................................................... 37
4.1 High-pressure cleaning ..................................................... 37
4.2 Cleaning the water lter .................................................... 38
4.3 Blowing out water.......................................................... 38
4.4 Rechargeable batteries ..................................................... 39
4.5 Recycling waste ............................................................ 39
TYROLIT Hydrostress AG
Page 4
WSE1621 Control unit
5. Malfunctions .................................................................... 40
6. Technical data ................................................................... 41
6.1 Dimensions ................................................................ 41
6.2 Weights .................................................................... 41
6.3 Electrical data .............................................................. 42
6.4 Water ...................................................................... 42
6.5 Recommended ambient temperature ....................................... 42
6.6 Remote controller .......................................................... 42
7. EC Declaration of Conformity ................................................... 43
8. Spare parts ...................................................................... 44
TYROLIT Hydrostress AG
Page 5
WSE1621 Control unit
Safety
DANGER
Failure to comply with the safety instructions in the “Safety Manuals / System Manuals” may re-
sult in serious injury or even death.
XMake sure the “Safety Manuals / System Descriptions” for the relevant type of saw have been
read and understood in full.
DANGER
Death or serious injury can be caused by sudden start-up of the machine!
XBefore switching on the system, ensure that no other persons are present in the danger areas.
XSwitch the system o before connecting or disconnecting cables.
XWhen leaving the system unattended: switch o and secure the system to prevent it being
switched on again.
Death or serious injury as a result of the sawing machine continuing to run after an accident
XEnsure that the EMERGENCY STOP button can be reached quickly.
Electric shock from live cables and connectors!
XSwitch o the WSE1621 Control unit before connecting or disconnecting cables.
XEnsure the power supply is earthed and tted with an AC/DC sensitive residual current
circuit breaker (FI type B) with a maximum residual current of 30mA.
Risk of re due to incorrect mains voltage!
XMake sure the mains voltage and mains frequency correspond with the mains settings of the
WSE1621 Control unit.
1
TYROLIT Hydrostress AG
Page 6
WSE1621 Control unit
What to do in an emergency
XPress the EMERGENCY STOP button on the remote controller.
EMERGENCY STOP
If the EMERGENCY STOP function is activated on the radio remote controller, the power supply
of the main motor is interrupted.
In the event of an emergency, the machine systems can also be switched o via the main switch
on the WSE1617 control unit.
Main switch
1.1
TYROLIT Hydrostress AG
Page 7
WSE1621 Control unit
Description
System
The WSE1621 Control unit / Remote controller can be used to operate various TYROLIT machine
systems.
System
1 Wall saw systems M Connection for main/drive motor
2 Wire saw systems Mv Connection for feed motor(s)
3 Core drilling systems
Water connection
4 Hand saw systems
2
2.1
TYROLIT Hydrostress AG
Page 8
WSE1621 Control unit
Main components
Main components Control unit
Main components Control unit
1 Remote controller 9 Connection for main motor
2 Connection for remote controller 10 Connection for feed motor
3 Hour counter 11 Switchboard
4 USB port 12 Water coupling / water inlet
5 Indicator light 13 Water coupling / water outlet
6 Housing with grip 14 Radio antenna / remote query
7 Main switch 15 Radio antenna / remote controller
8 Power supply 16 Remote controller cable
2.2
2.2.1
TYROLIT Hydrostress AG
Page 9
WSE1621 Control unit
Main components Remote controller
Main components of remote controller
1 Connection for remote controller cable 11 Display
2 Locking button (traverse feed) 12 Indicator light (radio & battery)
3 Rotary knob/push button, universal 13 Water On/O
4 Menu selection button 14 EMERGENCY STOP
5 Tool selection button 15 Feed joystick
6 Casing 16 Pulse button
7 Feed motor potentiometer 17 Start switch
8 USB port 18 Battery compartment
9 Main motor On/O 19 Reset button
10 Main motor potentiometer 20 Sun shield
Accessories for remote controller
The battery charger is exclusively designed for recharging the original interchangeable re-
chargeable batteries. The battery holder and the cable insert must not be inserted.
Accessories
1 2x interchangeable rechargeable batteries No. 10999383
2 Rechargeable battery charger No. 10984305
Rechargeable battery charger with 10–30VDC connection No.10984840
3 Remote controller cable No. 10999372
4 Battery holder No. 10999384
5 Key No. 10984309
2.2.2
2.2.3
TYROLIT Hydrostress AG
Page 10
WSE1621 Control unit
Remote controller
The remote controller can be replaced by an accumulator or a battery operated radio remote
controller. The remote controller can also be operated using a cable.
Operating modes
Radio remote controller
The transmitter and receiver are a pair of matched units. They cannot be used with other
devices. The number on the back of the remote controller must match the serial number on the
machine name plate.
Radio remote controller
Operating modes
Rechargeable battery operation:
The interchangeable rechargeable battery is inserted in the base of the casing of the re-
mote controller. The operating period with a fully charged battery is approximately 12 hours.
Themaximum reception distance is 25m.
Ordinary battery operation:
The battery insert included in the scope of supply allows operation with three 1.5 V AA batter-
ies. The reception distance is 25 m and the maximum operating time is 1 hour.
Cable operation:
The cable insert is included in the scope of supply and allows connection of the remote control-
ler to the WSE1621 Control unit. The cable length is 10m. Cable operation makes it possible to
work in areas where radio operation is not allowed (e.g. hospitals).
When working with the cable connection, all control signals are transmitted via the electric cable.
The rechargeable/ordinary battery holders must not be inserted in the base of the casing dur-
ing cable operation.
2.3
2.3.1
2.3.2
Otros manuales para WSE1621
1
Tabla de contenidos
Otros manuales de Unidad de control de TYROLIT Hydrostress
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
