TYAN TOMCAT I845GL Manual de usuario

http://www.TYAN.com

Trinity i845GL ///

S2098

Revision 1.00

reproduced or translated without prior written consent from TYAN Computer Corp.

All registered and unregistered trademarks and company names contained in this manual are

property of their respective owners including, but not limited to the following.

TYAN, Trinity i845GL S2098 are trademarks of TYAN Computer Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corporation.

AwardBIOS are trademarks of Phoenix Technology.

Microsoft, Windows are trademarks of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Promise is a trademark of Promise Technology.

ATI, ATI RAGE is a trademark of ATI Technologies Incorporated.

Winbond is a trademark of Winbond Electronics Corporation.

Information contained in this document is furnished by TYAN Computer Corporation and has been

reviewed for accuracy and reliability prior to printing. TYAN assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to sale and/or use of TYAN products including

liability or warranties relating to fitness for a particular purpose or merchantability. TYAN retains the

right to make changes to product descriptions and/or specifications at any time, without notice. In

no event will TYAN be held liable for any direct or indirect, incidental or consequential damage,

loss of use, loss of data or other malady resulting from errors or inaccuracies of information

contained in this document.

http://www.TYAN.com

Tableof Contents

Before you begin…

Chapter 1: Introduction

1.1 Congratulations!

1.2 Hardware Specifications

Chapter 2: Board Installation

2.1 Board

2.2 Board Jumpers

2.3 Fan Connectors

2.4 CMOS Reset (JP3)

2.5 Front Panel Connector (J9)

2.6 Wake-On-LAN (J10)

2.7 Wake-On-Ring (J12)

2.8 USB Header (J16)

2.9 Mounting the Motherboard

2.10 Installing the Memory

2.11 Memory Installation Procedure

2.12 Installing the Processors/Heatsink

2.13 Attaching Drive Cables

2.14 Installing Add-In Cards

2.15 Connecting External Devices

2.16 LAN LED Scheme

2.17 Installing the Power Supply

2.18 Finishing Up

Chapter 3: BIOS

3.1 Entering Setup

3.2 Standard CMOS Features

3.3 Advanced BIOS Features

3.4 Advanced Chipset Features

3.5 Integrated Peripherals

3.6 Power Management Setup

3.7 PnP/PCI Configuration

3.8 PC Health Status

3.9 Frequency and Voltage Control

Chapter 4: Diagnostics

4.1 Beep Codes

4.2 Flash Utility

Appendix I: Glossary

Technical Support

……………………………………………..Page 3

……………………………………………..Page 4

……………………………………………..Page 6

……………………………………………..Page 7

……………………………………………..Page 8

……………………………………………..Page 9

……………………………………………Page 10

……………………………………………Page 11

……………………………………………Page 12

……………………………………………Page 13

……………………………………………Page 14

……………………………………………Page 15

……………………………………………Page 17

……………………………………………Page 18

……………………………………………Page 19

……………………………………………Page 20

……………………………………………Page 22

……………………………………………Page 24

……………………………………………Page 25

……………………………………………Page 27

……………………………………………Page 29

……………………………………………Page 31

……………………………………………Page 32

……………………………………………Page 33

……………………………………………Page 34

……………………………………………Page 35

……………………………………………Page 40

http://www.TYAN.com

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1x Trinity i845GL motherboard

1x 34-Pin floppy drive cable

1x Ultra-DMA-133/100/66 IDE cable

1x Trinity i845GL User’s Manual

1 x Trinity i845GL Quick Reference

1x TYAN driver CD

1x I/O shield

If any of these items are missing, please contact your vendor/dealer for replacement before

continuing with the installation process.

http://www.TYAN.com

Chapter 1: Introduction

1.1 –Congratulations!

You have just bought one of the most advanced platforms suited for digital content creation,

productivity and 3D gaming applications. The Trinity i845GL is based on Intel’s 845GL chipset,

supporting the Intel Pentium 4 or Celeron Processor with 400MHz FSB, DDR memory, Intel

Extreme Graphics, and more. These features enable breakthrough performance for today’s rapidly

developing multimedia applications.

Visit TYAN’s Website at http://www.TYAN.com. There you can find information on all of TYAN’s

products with FAQ’s, distributor’s list and BIOS setting explanations.

1.2 –Hardware Specifications

Processors

• Single ZIF PGA478 Socket

• IntelP4 “Northwood” and “Celeron”

processor

• 400 MHz FSB support

Expansion Slots

• Two 32bit/33Mhz PCI 2.2 slots

Chipset

• Intel 845GL chipset

• Intel ICH4

• ITE IT8712F LPC I/O chip

SystemManagement

• 3-pin Fan monitoring headers

• Temperature and voltage monitoring

• 3-pin Wake-On-Ring header

• 3-pin Wake-On-LAN header

Memory

• Two DDR DIMM sockets

• Up to 2GB of Unbuffered PC1600/2100 DDR

• Supports Non-ECC type memory modules

Integrated PCI IDE

• Dual channel master mode support up to four

IDE devices

• Support for ATA-100/66/33 IDE drives and

ATAPI compliant devices

Power

• On board VRM

• ATX 12V (20-pin + 4-pin) power connectors

Back Panel I/O Ports

• Stacked PS/2 Mouse & Keyboard ports

• Stacked four USB 2.0 ports

• One 9-pin UART Serial port

• One 15-pin VGA port

• One 25-pin SPP/ECP/EPP parallel port

• One RJ45 10/100 Base-T port

• Vertical audio jacks (dual-footprint w/one RJ45

10/100 port, optional)

Integrated I/O Interfaces

• One Floppy connector for up to two drives

• Two IDEconnectors for up to four IDE devices

• Two USB 2.0 Ports (via optional cable)

• One IRDA connector (via optional cable)

• CD-Audio in (manufacturing option)

• Power/IDE LED connectors

• Headers for CPU/Power Supply/Chassis Fans

Integrated LAN Controller(s)

• One 10/100 Base-T LAN controller

§Intel 82551 LAN controller

§Operating at 32bit/33MHz PCI bus

•(Optional) one 10/100 Base-T LAN controller

§Intel 82551 LAN controller

§Operating at 32bit/33MHz PCI bus

IntegratedAudio(optional)

• Realtek ALC202 audio CODEC

• Dual-channel audio

• Line-In/Line-Out/Mic-In audio jack

• CD-in connector

http://www.TYAN.com

Integrated Graphics

• Intel Extreme Graphics Core

• Optimized 256-bit BLT engine

• Up to 2.1GB/s data access in UMA

configuration

• Supports analog monitor up to 2048x1536 at

60Hz

BIOS

• Award BIOS 4Mbit Flash

• Supports APM 1.2 & ACPI 1.0

• Auto detection of memory size

• Auto configuration of IDE hard disk types

• User settings of hardware monitoring

• Multiple boot options

• Power Management: S1, S3, S4

• Jumper free setting for CPU over clocking

Form Factor

• Flex ATX footprint

• 9” x 7.5” (228.6cm x 190.5mm)

Regulatory

• FCC Class B (Declaration of Conformity)

• European Community CE (Declaration of

Conformity)

• BSMI (to be defined)

Operating System Support

• Windows 2000 and XP

• Windows 98SE and NT4

• Windows ME

•Linux (Tested under Red Hat 7.3)

TYAN reserves the right to add or

discontinue support for any OS with or

withoutnotice.

http://www.TYAN.com

Chapter 2: Board Installation

Installation

You are now ready to install your motherboard. The mounting hole pattern of the Trinity i845GL

matches the FlexATX system board specifications. Your chassis should support a standard

FlexATX motherboard form factor.

How to install our products right…. the first time!

The first thing you should do is read this user’s manual. It contains important information that will

make configuration and setup much easier. Here are some precautions you should take when

installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the antistatic bag.

Unplug the power from your computer power supply and then touch a safely grounded

object to release static charge (i.e. power supply case). For the safest conditions, TYAN

recommendswearing astatic safetywriststrap.

(2) Hold the motherboard by its edges and do not touch the bottom of the board, or flex the

board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors, memory modules,

and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic bag that the

board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your chassis, as well

as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED

http://www.TYAN.com

2.1 –Board

The following is an image of the Trinity i845GL S2098.

The above photograph is purely representative. Due to engineering updates and new board

revisions, certain components may change and or be repositioned. The picture above may

or may not look exactly like the board you received.

The following page includes details on the vital components of this motherboard.

http://www.TYAN.com

2.2 –Board Jumpers

This jumper diagram is representative ofthe latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above diagram.

http://www.TYAN.com

2.3 –Fan Connectors

Use these headers to connect cooling fans, both chassis and

processor fans, to your motherboard. Cooling fans help keep the

system more stable and operating reliably for its product life.

2.4 –CMOS Reset (JP3)

ClearCMOS

Default

2,3: Clear CMOS

1,2: Default

Connect pins 2 and 3 together to reset the CMOS settings in case an incorrect

setting causes system instability or you have forgotten your system/setup

password or have just flashed your BIOS.

Power off the system and disconnect the power supply.

-Close pins 2 and 3 on JP1

-Wait about 5 seconds

-Close pins 1 and 2 on JP1

-Reconnect the power supply and power on the system

2.5 –Front Panel Connector (J9)

Your chassis will usually come with connectors to install onto the motherboard, such as HDD and

Power LEDs.The Front Panel Connector has been implemented for such purposes.

J9 Pinout:

HDDLED: 1,3

Power LED: 2,4

Reset Switch: 5,7

Power/Sleep Switch: 6,8

Infrared: 11,13,15, 17

Speaker: 12,14,16,18

Pin 2

Power

LED

Pin 4

Power

LED

Pin 6

Power

Switch

Pin 8

Power

Switch

Pin 10

Reserved

Pin 12

Speaker

Pin 14

Speaker

Pin 16

Speaker

Pin 18

Speaker

Pin 1

HDD

LED

Pin 3

HDD

LED

Pin 5

Reset

Switch

Pin 7

GND

Pin 9

Reserved

Pin 11

Infrared

Pin 13

Infrared

Pin 15

Infrared

Pin 17

Infrared

http://www.TYAN.com

2.6 –Wake-On-LAN (J10)

Plugging your LAN card cable into J10 enables the Wake-On-LAN feature. This

automatically resumes the system power when the LAN port receives an

incoming signal during power-saving mode.

2.7 –Wake-On-Ring (J12)

Similarly to the Wake-On-LAN, plugging your modem into J12 enables the

Wake-On-Ring feature. This automatically resumes the system power when the

modem receives an incoming signal during power-saving mode.

2.8 –USB Header (J16)

Pins grouped together:

1,2: VCC

3,4: USB +

5,6: USB –

7,8,9,10: GND

Pin 2

VCC

Pin 4

USB +

Pin 6

USB –

Pin 8

GND

Pin 10

GND

Pin 1

VCC

Pin 3

USB +

Pin 5

USB –

Pin 7

GND

Pin 9

GND

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de TYAN

TYAN

TYAN TIGER I7501X Manual de usuario

TYAN

TYAN TOMCAT K8E Manual de usuario

TYAN

TYAN S5535 Manual de usuario

TYAN

TYAN S7053 Manual de usuario

TYAN

TYAN Tsunami S1846S Manual de usuario

TYAN

TYAN Trinity ATX Motherboard Tyan S1598 Manual de usuario

TYAN

TYAN TRINITY KT400 Manual de usuario

TYAN

TYAN Thunder K8W S2885 Manual de usuario

TYAN

TYAN TOMCAT I875PF Manual de usuario

TYAN

TYAN TAHOE PLUS ATX Manual de usuario

TYAN

TYAN TRINITY 450 Manual de usuario

TYAN

TYAN S2505T Instrucciones de instalación y funcionamiento

TYAN

TYAN TIGER 200 Manual de usuario

TYAN

TYAN THUNDER K8QS PRO Manual de usuario

TYAN

TYAN Tiger MP S2460 Manual de usuario

TYAN

TYAN Tiger K8WE Manual de usuario

TYAN

TYAN TOMCAT K8SH Manual de usuario

TYAN

TYAN S5510 Manual de usuario

TYAN

TYAN S7016 Manual de usuario

TYAN

TYAN S7065 Manual de usuario

TYAN

TYAN Thunder i7501 S2720-533 Manual de usuario

TYAN

TYAN THUNDER LE S2510 Manual de usuario

TYAN

TYAN TEMPEST I5000VF Manual de usuario

TYAN

TYAN S7105 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario