TYAN Toledo q35T Manual de usuario

Toledo q35T /// S5220

Version 1.1

manual may be reproduced or translated without prior written consent from TYAN

Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN, Toledo q35T are trademarks of TYAN Computer Corporation.

Intel®, Intel® Core 2 Duo / Wolfdale / Yorksfield Quad Core processor, Q35, and

combinations thereof are trademarks of Intel Corporation.

Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE is a trademark of Novell.

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Notice

Information contained in this document is furnished by TYAN Computer Corporation

and has been reviewed for accuracy and reliability prior to printing. TYAN assumes

no liability whatsoever, and disclaims any express or implied warranty, relating to

sale and/or use of TYAN products including liability or warranties relating to fitness

for a particular purpose or merchantability. TYAN retains the right to make changes

to product descriptions and/or specifications at any time, without notice. In no event

will TYAN be held liable for any direct or indirect, incidental or consequential

damage, loss of use, loss of data or other malady resulting from errors or

inaccuracies of information contained in this document.

Table of Contents

Check the box contents! 3

Chapter 1: Introduction

1.1 Congratulations 5

1.2 Hardware Specifications 5

Chapter 2: Board Installation

2.1 Board Image 8

2.2 Block Diagram 9

2.3 Board Parts, Jumpers and Connectors 10

2.4 Tips on Installing Motherboard in Chassis 20

2.5 Installing the Memory 21

2.6 Installing the Processor and Cooling Fan 23

2.7 Attaching Drive Cables 26

2.8 Installing Add-in Cards 27

2.9 Installing Optional SO-DIMM Modules 28

2.10 Connecting External Devices 29

2.11 Installing the Power Supply 30

2.12 Finishing Up 30

Chapter 3: BIOS Setup

3.1 About the BIOS 31

3.2 Main BIOS Setup 33

3.3 Main Menu 34

3.4 Advanced Menu 41

3.5 Security Menu 61

3.6 Power Menu 62

3.7 Boot Menu 63

3.8 Exit Menu 64

Chapter 4: Diagnostics

4.1 Beep Codes 65

4.2 Flash Utility 65

4.3 Phoenix BIOS Post Code 66

Appendix: SMDC Information 69

Glossary 71

Technical Support 77

Check the box contents!

1x S5220 motherboard

1 x Ultra-DMA-133/100/66/33 IDE cable

3 x Serial ATA power cables

3x Serial ATA cables

1x USB2.0 cable

1 x S5220 user’s manual

1 x S5220 Quick Reference guide

1 x TYAN driver CD

1 x I/O shield

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

NOTE

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions available. The

Toledo q35T (S5220) is a flexible Intel®platform for multiple applications, based on

the Intel®Q35 memory Controller Hub (GMCH) and 82801IR I/O Controller Hub

(ICH9R) chipsets.

Designed to support the family of Intel®Socket 775 processors and 8GB of DDR2

800/667 memory, the S5220 has integrated Dual Ethernet LAN’s, an integrated

graphics controller from Q35 and six SATA-II ports. This motherboard represents

the best choice for a server platform product.

Remember to visit TYAN’s Website at http://www.TYAN.com. There you can find

information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processor

•One (1) LGA775-pin socket supports

Intel CPUs of the type below:

- Intel Core 2 Duo / Wolfdale /

Yorksfield Quad core processors

•Supports 1333/1066/800 MT/s FSB

Expansion Slots

•One (1) PCI-E x16 slot

- with Tyan M2061 riser card: PCI-E

x8 to PCI-X

- with Tyan M2083-RS riser card:

PCI-E x16 to PCI-E x16

•One (1) PCI-X x8 slot with PCI-E x4

link only

•Four (4) PCI slots

Chipset

•Intel®Q35 Memory Controller Hub

(GMCH)

•Intel 82801IR I/O Controller Hub

(ICH9R)

•Winbond W83627DHG super I/O

Onboard Audio

•Onboard Realtek ALC262

Integrated LAN Controllers

•One (1) Intel 82573L and one (1) Intel

82573V single port Gigabit Controller

Integrated SATA Controllers

•Six (6) SATA ports from ICH9R

Integrated I/O

•One (1) 40-pin IDE connector (Extend

IDE from ITE IT8213F)

•Six (6) SATA (3Gb/s) ports

•Four (4) USB 2.0 connectors (support

two USB 2.0 devices)

•One (1) shrouded header for serial

port or LCM module interface

connector

•One (1) pin header for audio ports

•One (1) TYAN SMDC connector for

server management (M3295-2)

•One (1) pin header for SMBUS

connection

•One (1) 34-pin FDD connector

Integrated 2D/3D PCI Graphics

•Integrated graphics from Q35; one

PCI-E x16 slot is available for the

VGA card

Memory

•Four 240-pin DDR2 sockets support

up to 8 GB

•Dual channel memory bus (must be

populated in pairs)

•Un-buffered, non-ECC DDR2 667/800

MHz DIMM

•Supports 256MB, 512MB, 1GB, 2GB

DIMM

System Management

•Total six (6) fan headers with control

and tachometer monitoring

•Monitoring voltage for CPU, Memory

& Power Supply

•Monitoring temperature for CPU &

environment

•One (1) pin header for Chassis

Intrusion detection

•Supports Serial Console Redirect

•Supports Watch Dog Timer, ACPI

S1/S3/S4/S5

External I/O Ports

•Stacked PS/2 mouse & keyboard ports

•Stacked two (2) USB ports

•Stacked COM port and VGA port

•Stacked two (2) USB ports and one (1)

10/100M LAN port (LAN port is for

M3295-2 only)

•Two (2) RJ-45 10/100/1000M ports

•Audio connectors (Line-in/Line-

out/Mic-in)

BIOS

•Phoenix BIOS on 8Mbit LPC Flash

ROM

•Supports boot from USB device

•Supports ACPI 2.0

•Power-on mode control for AC power

loss recovery

Power Supply

•EPS 12V Power Supply (24-pin + 8-

pin power connectors)

Regulatory

•FCC Class B (DoC)

•European Community CE (DoC)

Form Factor

•ATX form factor

•12” x 9.6” (305mm x244mm)

Chapter 2: Board Installation

You are now ready to install your motherboard. The mounting hole pattern of the

Toledo q35T (S5220) matches the ATX specification. Before continuing with

installation, confirm that your chassis supports an ATX motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

2.1- Board Image

Toledo q35T S5220

This picture is representative of the latest board revision available at the

time of publishing. The board you receive may or may not look exactly

like the above picture.

2.2 - Block Diagram

Toledo q35T S5220

2.3 - Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

 OPEN - Jumper OFF, without jumper cover

 CLOSED – Jumper ON, with jumper cover

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de TYAN

TYAN

TYAN Thunder n3600QX Manual de usuario

TYAN

TYAN TITAN III Manual de usuario

TYAN

TYAN S5512 Manual de usuario

TYAN

TYAN TOMCAT K8E-SLI Manual de usuario

TYAN

TYAN Thunder i7500 Pro S2721 Manual de usuario

TYAN

TYAN S8253 Manual de usuario

TYAN

TYAN TRINITY 450 Manual de usuario

TYAN

TYAN S7002 Manual de usuario

TYAN

TYAN THUNDER I7525 Manual de usuario

TYAN

TYAN THUNDER I7501 XTREME Manual de usuario

TYAN

TYAN 1.00 Manual de usuario

TYAN

TYAN THUNDER K7 Manual de usuario

TYAN

TYAN S5620 Manual de usuario

TYAN

TYAN THUNDER K7 Manual de usuario

TYAN

TYAN Tiger K8WE Manual de usuario

TYAN

TYAN S7106 Manual de usuario

TYAN

TYAN S7063 Manual de usuario

TYAN

TYAN TOMAHAWK BX Manual de usuario

TYAN

TYAN InterServe 90 Manual de usuario

TYAN

TYAN S5560 Manual de usuario

TYAN

TYAN S7105 Manual de usuario

TYAN

TYAN TOLEDO I3010W Manual de usuario

TYAN

TYAN TEMPEST I5000XL Manual de usuario

TYAN

TYAN Tempest i5100W Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario