TYAN S5372-LH Manual de usuario

Tempest i5000VS /// S5372-LH

Version 1.0

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Tempest i5000VS are trademarks of TYAN Computer Corporation.

Intel, 5000V, and combinations thereof are trademarks of Intel Corporation.

Phoenix, Phoenix-Award BIOS are trademarks of Phoenix Technologies.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

Table of Contents

Check the box contents! 3

Chapter 1: Introduction

1.1 Congratulations 5

1.2 Hardware Specifications 5

Chapter 2: Board Installation

2.1 Board Image 8

2.2 Block Diagram 9

2.3 Board Parts, Jumpers and Connectors 10

2.4 Tips on Installing Motherboard in Chassis 18

2.5 Installing the Processor(s) 19

2.6 Installing the Memory 22

2.7 Attaching Drive Cables 24

2.8 Installing Add-in Cards 26

2.9 Connecting External Devices 27

2.10 Installing the Power Supply 28

2.11 Finishing up 28

Chapter 3: BIOS Setup

3.1 About the BIOS 29

3.2 BIOS Main Menu 31

3.3 Advanced Menu 39

3.4 Security Menu 57

3.5 Power Menu 58

3.6 Boot Menu 60

3.7 Exit Menu 61

Chapter 4: Diagnostics

4.1 Beep Codes 63

4.2 Flash Utility 63

4.3 Phoenix BIOS Post Code 64

Appendix: SMDC Information 67

Glossary 69

Technical Support 77

Check the box contents!

1x S5372-LH motherboard

1 x Ultra-DMA-133/100/66/33 IDE cable

2 x Serial ATA power cable

4 x Serial ATA Cable

1 x USB2.0 cable

1 x S5372-LH user’s manual

1 x S5372-LH Quick Reference guide

1 x TYAN driver CD

1 x I/O shield

2 x CPU Back Plane

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

NOTE

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions. The Tempest

i5000VS (S5372-LH) is a flexible Intel®platform for multiple applications, based

on Intel®5000V MCH and ESB6321 chipsets.

Designed to support Intel®Xeon 5100/5200/5300/5400(80W or lower)

processors and DDR2-533/667 FB-DIMM memory, and featured with integrated

Dual Gigabit Ethernet LAN, built-in 16MB XGI XG20TM video plus four serial

ATA ports, the S5372-LH offers exceptional performance and versatile solution

for your server platform.

Remember to visit TYAN’s Website at http://www.TYAN.com. There you can

find information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 – Hardware Specifications

Processors

•Dual LGA771 sockets

•Supports up to two (2) Intel® Xeon

5100/5200/5300/5400 series

processors

- Intel Xeon CPU support for 80W

CPU or lower

•1066/1333 MHz FSB

Chipset

•Intel® 5000V MCH

•Intel ESB6321 south bridge

•SMSC SCH5017 super I/O chip

Memory

•Dual memory channels, six (6)

240-pin FBDIMM socket

•Supports DDR2 FBDIMM

667/533MHz

*FB-DIMM: Fully Buffered DIMM

Expansion Slots

•One (1) 64/133 PCI-X slot in-lined

with one (1) inversed PCI-E x4 slot

(routed to PCI-E x8 bus)

•One (1) 32/33 PCI 2.3 slot

Integrated LAN Controllers

•Dual Gigabit MAC (ESB6321

embedded) with i82563EB Dual

PHY

Integrated PCI IDE (ESB6321)

•Single channel master modes

support up to two (2) IDE devices

•Support Ultra ATA-100/66/33 IDE

drives and ATAPI compliant

devices

Integrated SATA Controller

(ESB6321)

•One Serial ATA Host controller

embedded

•Supports four ports running up to

3.0Gb/s

•RAID 0, 1, 5, 10 supported

(Windows OS only)

Back Panel I/O Ports

•Stacked PS/2 Mouse & Keyboard

ports

•Stacked two (2) USB 2.0

•One (1) 15-pin VGA port

•One (1) x8 PCI-E slot (with PCI-E

x4 bus)

•One (1) TYAN TARO SO-DIMM

socket

Integrated I/O

•One (1) IDE connector

•Four (4) SATA ports

•Four (4) USB 2.0 ports (2 at rear,

2 via cable)

•TYAN 2x9 front-panel pin header

•2 x 25 connector for optional TYAN

IPMI SMDC

System Management

•SMSC SCH5017, EMC6D103 &

Winbond 83793G with H/W

monitoring

•Two (2) 3+1-pin CPU fan headers

with tachometer monitoring and

auto fan speed control

•Temperature and voltage

monitoring

•Chassis intrusion header

•Watchdog timer

BIOS

•PhoenixBIOS on 8Mbit Flash ROM

•Supports APM 1.2 & ACPI 1.0

•Serial Console Redirect

•USB boot supported

•PnP, DMI2.0, WfM2.0 power

management

Power

•Onboard dual 4-phase VRM

•EPS 12V/SSI (24+8-pin) power

connectors

•One (1) 9-pin COM port

•Two (2) RJ45 10/100/1000 Base-T

ports with activity LED

Integrated PCI Graphics

•XGI XG20 PCI graphics controller

•16MB DDR Frame Buffer of video

memory

Optional Modules

•M3291, IPMI 2.0 Remote System

Management Card

- Renesas H8S2167 BMC controller

- BT, KCS, Logging support

- IPMI-over-LAN

- Remote power on/off and reset

•M7901/M7902, Ultra 320 SCSI

“TARO” card

- Adaptec AIC-7901/7902

single/dual-channel Ultra320 SCSI

controller

- Adaptec HostRAID 0, 1 & 10

supported

•M9000 SAS/SATA II “TARO” card

- Adaptec AIC-9405/9410 SAS

controller

- Supports up to 4-port (M9000-5)

and 8-port (M9000-10) SAS &

SATA running at 3.0Gb/s

- Adaptec HostRAID 0,1 & 10

supported

Regulatory

•FCC Class B (DoC)

•CE (DoC)

Form Factor

•SSI CEB v1.01 footprint

•12.0” x 10.5” (305mm x 267mm)

Chapter 2: Board Installation

You are now ready to install your motherboard. The mounting hole pattern of

the Tempest i5000VS S5372-LH matches the SSI CEB v1.01 specification.

Before continuing with installation, confirm that your chassis supports an SSI

CEB v1.01 motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

2.2 – Block Diagram

Tempest i5000VS S5372-LH Block Diagram

2.3 – Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

 OPEN – Jumper OFF, without jumper cover

 CLOSED – Jumper ON, with jumper cover

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de TYAN

TYAN

TYAN S7055 Manual de usuario

TYAN

TYAN S7010 Manual de usuario

TYAN

TYAN TOMCAT I875PR Manual de usuario

TYAN

TYAN Tiger K8WE Manual de usuario

TYAN

TYAN S7120 Manual de usuario

TYAN

TYAN THUNDER I7522 Manual de usuario

TYAN

TYAN TITAN III Manual de usuario

TYAN

TYAN Thunder n3600W S2935 Manual de usuario

TYAN

TYAN S1830 TSUNAMI AT Manual de usuario

TYAN

TYAN TRINITY 450 Manual de usuario

TYAN

TYAN S2505T Instrucciones de instalación y funcionamiento

TYAN

TYAN TOMCAT I845GL Manual de usuario

TYAN

TYAN S5501 Manual de operación y mantenimiento

TYAN

TYAN AST2150 IPMI Manual de usuario

TYAN

TYAN TOMAHAWK BX Manual de usuario

TYAN

TYAN TIGER K8W Manual de usuario

TYAN

TYAN TIGER 133 Manual de usuario

TYAN

TYAN TEMPEST I5000PW Manual de usuario

TYAN

TYAN TEMPEST I5000XL Manual de usuario

TYAN

TYAN S8036 Manual de usuario

TYAN

TYAN TITAN VX Manual de usuario

TYAN

TYAN S7050 Manual de usuario

TYAN

TYAN TOMCAT K8SH Manual de usuario

TYAN

TYAN THUNDER I7501 XTREME Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario