TW Audio SYSRACK-TGX Manual de usuario
SYSRACK-TGX
Operation manual
Operation manual SYSRACK-TGX
2
Introduction
The SYSRACK-TGX, developed by TWAUDiO, includes a Dynacord TGX10 power amplifier
as well as the new LED illuminated APL7 TGX connection panel, all combined in the new
Rack4TGX.
TGX 4-channel live sound amplifiers from Dynacord are one of the most powerful on the
market and represent the pinnacle of pro audio electronics engineering. Along with unprece-
dented power density, they offer Dynacord’s signature audio quality, advanced reliability and
power efficiency.
The APL7 connector panel provides all of the amplifier‘s connections at the front of the
SYSRACK-TGX. The integrated and switchable LED strip ensures a clear overview of the
panel even in difficult lighting conditions.
The panel layout follows the logical signal flow through the amplifier with a power, network,
audio input and output section. The two network ports provide the ability to use the amplifier
in a fully redundant network configuration supporting the latest standards in audio-over-IP
protocols with the OMNEO IP interface for Dante® and AES70.
The panel features the TGX series‘ ability to buffer digital audio signals when multiple ampli-
fiers are connected in parallel. The AES/EBU input signal is latency-free processed via an
active circuit in the amplifier.
Instructions in this user manual
WARNING
WARNING
Thank you for choosing a high-quality product “MADE IN GERMANY” from the brand
TW AUDiO.
If you lend your product to another party, inform that party of the safety-related operating pro-
cedures and hand over this assembly guide. If you require additional copies of this manual,
you can obtain them free of charge from TWAUDiO or download them from www.twaudio.de
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation for persons with a pacemaker. Failure to comply with this safety instruction can lead
to serious injury or even death.
Operation manual SYSRACK-TGX
3
TIP
Read manual
before use!
Operation manual: OM-SYSRACK-TGX
Version 2.0 en, 10/2023
CAUTION
NOTE
This symbol in combination with the signal word “Caution” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to light or moderate injury.
This symbol in combination with the signal word “Note” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to product damage.
This symbol in combination with the signal word “Tip” identifies additional information or
notes that will simplify working with TWAUDiO products on the basis of practical experience.
Notes on the products
Before using the device, carefully read the operating manual and keep it with the
SYSRACK-TGX.
General information
All information contained in this operating manual was correct to the best of our knowledge
at the time of printing.
Quality warranties or assurance of suitability for a certain type of use based on the technical
specifications, dimensions and weights are not granted by TWAMBO.
TWAMBO also shall not assume liability for any secondary damage (property damage and/or
personal injury) nor for the failure to comply with this operating manual!
TWAMBO reserves the right to update this document based on recent developments.
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin
Germany
Phone : + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de
© by TWAMBO 2023; all rights reserved.
Operation manual SYSRACK-TGX
4
Content
1. Safety | Intended use...................................................................................................... 5
2. Overview ........................................................................................................................ 7
2.1 Components ........................................................................................................... 7
3. Technical specifications .................................................................................................. 8
3.1 SYSRACK-TGX ....................................................................................................... 8
3.2 Dynacord TGX power amplifier ................................................................................ 8
3.3 APL7 connection panel............................................................................................ 9
4. Commissioning............................................................................................................. 10
4.1 Setup .................................................................................................................... 10
4.2 Handling................................................................................................................ 10
4.3 Installation ............................................................................................................. 12
4.4 Transport............................................................................................................... 13
4.5 Service and maintenance ...................................................................................... 14
4.6 Internal wiring ........................................................................................................ 14
4.7 Mains voltage ........................................................................................................ 15
4.8 Network ................................................................................................................ 16
4.9 Audio inputs .......................................................................................................... 19
4.10 Power outputs..................................................................................................... 22
4.11 LED-lighting......................................................................................................... 22
5. Transport and Storage.................................................................................................. 23
6. CE Conformity Declaration............................................................................................ 24
7. Disposal ....................................................................................................................... 25
Operation manual SYSRACK-TGX
5
1. Safety | Intended use
The SYSRACK-TGX is developed for use in professional sound systems. The SYSRACK-TGX
may only be used by trained and qualified personnel.
This operating manual describes the intended use of the SYSRACK-TGX. Any other use is
not as intended and may result in damage or even injury.
Modifications on the SYSRACK-TGX are not permitted! There is danger to life! Also observe
the manufacturer‘s instructions and safety notes when operating the products, especially the
power amplifier used.
Before using the SYSRACK-TGX, verify the shipment for completeness and ensure that all
parts are in a proper condition.
The SYSRACK-TGX is designed both for indoor and outdoor use. Keep the device away from
water!
The SYSRACK-TGX may only be used by trained and qualified personnel. Before each use,
the SYSRACK-TGX must be checked for its full functionality and the proper condition of all
items.
The SYSRACK-TGX has to be taken out of operation immediately, as soon as visible damage
to the rack, the devices or its cabling are visible.
The rack is fully pre-wired and contains a Dynacord TGX system amplifier and a dedicated
connection panel for network and audio as well as power supply.
WARNING
WARNING
WARNING
WARNING
CAUTION
Please adhere to the following safety instructions to avoid risks when using amplifiers.
Note the operating modes described in this assembly instructions. Other uses are not per-
missible.
Damage caused by improper use is not covered by TWAMBO.
When moving (assembling, dismantling, maintaining) the SYSRACK-TGX, ensure sufficient
space to prevent collisions with other objects.
WARNING
Operation manual SYSRACK-TGX
6
Do not squeeze or twist the electrical cables of the SYSRACK-TGX. The respective national
electrotechnical rules and regulations are applicable.
Please note that there is a risk of electric shock or fire if the mains cable or power connector
is damaged!
The SYSRACK-TGX must only be operated via a mains power supply with a safety ground
connector. Do not disconnect or cover the safety ground connection of the power cable.
Replace the mains cable immediately if the cable or connector is damaged!
Ensure that the power connector is only plugged and unplugged if the device is free of vol-
tage.
Make sure that the specified supply voltages are provided by the power grid. There is a label
with safety instructions on the backside of the rack.
WARNING
WARNING
CAUTION
NOTE
Operation manual SYSRACK-TGX
7
1
4
56
2
3
7
2. Overview
2.1 Components
1. Rack4TGX
2. Slide-in front lid
3. Dynacord TGX10 power amplifier
4. APL7 connection panel
5. Ventilation grille
6. Nameplate
7. Mains cable (must be ordered separately)
Figure 2.1 - Overview
Operation manual SYSRACK-TGX
8
3.1 SYSRACK-TGX
Components 1× Dynacord TGX-power amplifier |
1× APL7 connection panel
Size 19“ rack | 4 U
Dimensions (H × W × D) 253 × 600 ×600 mm [9.96 × 23.62 × 23.62 in]
Weight 34 kg [74.96lbs]
Surface polyurea-coated
OUTPUT POWER
Load impedance 2,7 Ω 4 Ω 8 Ω
Maximum output power
All channels controlled 3000W 2500 W 1250 W
Number of amplifier channels 4
Maximum output voltage 150 V peak
Maximum output current 53 A peak
Frequency response
ref. 1 kHz, analog in to speaker out 20 Hz bis 20 kHz (± 0,5 dB)
3. Technical specifications
3.2 Dynacord TGX power amplifier
Operation manual SYSRACK-TGX
9
DIGITAL SIGNAL PROCESSING
Filter structures 17 filter per channel, can be implemented in
several filter types
Further signal processing
parameters Gain and Delay (0 to 2500 ms) per channel
Other functions
Source selection and mix, level, mute, polarity,
sine and noise generator, level meters, impedan-
ce measurement, and load monitoring
Source monitoring fallback AES3 lock and OMNEO-/Dante®-Network moni-
toring, switching to alternative source selection
Control software Sonicue
Further technical data for the Dynacord TGX10 power amplifier can be found on the Dynacord
website: www.dynacord.com/de
Mains in 1× Neutrik powerCON®-HC frontseitig
Network PRIMARY / SECONDARY
etherCON®/RJ45 for Dante® audio network and
controlling via direct connection to
the power amplifier
Audio IN / LINK 2× AES3 in combination and alternative use with
4× analog IN & LINK via XLR
Analog
Maximum input level: +24 dBu
Input impedance, active balanced: 20 kΩ
Reference level equal to digital input:
+21 dBu for 0 dBFS
Digital
Format: AES3 (AES/EBU)
Input sample rates: 32 bis 192kHz,
Internal sample rate converter and
signal processing
Audio OUT 6× speakON® NL4 | 1× speakON® NL8
3.3 APL7 connection panel
Operation manual SYSRACK-TGX
10
4. Commissioning
4.1 Setup
The SYSRACK-TGX should be used in horizontal orientation.
Please note that due to the weight of the SYSRACK-TGX, two people are required to set up
the system.
4.2 Handling
The SYSRACK-TGX has a sliding lid on the front that allows easy access to the devices.
To open the lid, follow these steps:
1. Open the latch on the bottom of the lid.
Figure 4.2.1 - Unlock the lid
WARNING
Tabla de contenidos
Otros manuales de Amplificador de TW Audio
