TV One MOD-32432-DVI Manual de usuario

32x32 Modular Matrix
MOD-32432-DVI • MOD-32432-DVIELR • MOD-32432-DVI1FO
MOD-32432-DPDVI • MOD-32432-DPELR • MOD-32432-DP1FO
The tvONE 32x32 Modular Matrix
Congratulations on your purchase of the 32x32 Modular Matrix. Your complete satisfaction is very important to us.
The tvONE 32x32 Modular Matrix provides an all-in-one professional solution to route up to 32 mixed sources to any 32 outputs supporting resolutions up to 1920 x
1200. The modular design of this large-scale matrix provides the ultimate in flexibility by allowing the use of any combination of DVI, DisplayPort, ELR, and 1FO output
cards in any of its four output slots. This feature allows the tvONE 32x32 Modular Matrix to function as both a Matrix and as an Extender. The front-panel LCD displays
the current routing status and each mixed source is accessible to any display by using the front-panel push buttons, or via the RS-232 interface, or through IP Control
(built-in Web server and Telnet). Hot-swappable, dual redundant power supplies allow these matrixes to be used for applications in demanding environments where
enhanced reliability, 24/7 ease of servicing, and zero down-time are required.
Quick Start Guide

www.tvone.com

Before reading this Quick-Start Guide, familiarize yourself with the rear panel of
the 32x32 Modular Matrix.
The 32x32 Modular Matrix can accommodate up to four output cards and four
input cards. Each card provides eight connectors, providing up to 32 inputs and
32 outputs. The 32x32 Modular Matrix is sold pre-configured with a combination
of input and output cards best suited for the needs of your application. We will
cover each configuration in the next section. First, we will identify the location of
each input and output card on the matrix.
Matrix Layout (all configuration options)
The bottom-four expansion bays of the matrix only accept input cards.
The top-four expansion bays only accept output cards. Each expansion bay on the
matrix is identified with a letter: A, B, C, and D, from top to bottom (see opposite
page).
The inputs and outputs are numbered on each card, from left-to-right.
Blue LEDs on each card indicate that the card is properly powered.
Consult the User Manual for additional information on the rear-panel layout.
1
NOTE: When a card is not installed, it is recommended that
a cover plate be installed over the expansion bay to prevent
dust and other foreign particles from entering the matrix.
Quick Start Guide
Make sure you have everything that came with your product:
Refer to page 3 for the included items shipped with your product.
tvONE USA
2791 Circleport Drive, Erlanger, KY 41018
Telephone: 859-980-0420
Fax: 859-282-8225
Email: [email protected]
Visit us on the Web: www. tvone.com
Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, EDT
tvONE EMEA
Unit V, Continental Approach, Westwood Ind Est, Margate, Kent CT9 4JG, UK
Telephone: +44 (0)1843 873322
Fax: +44 (0)1843 873301
Email: [email protected]
Visit us on the Web: www. tvone.com
Technical Support Hours: 8:00 AM to 5:30 PM Monday - Friday, GMT
For 24 / 7 support, see the back of the product for the support number
Refer to the last page of this Quick-Start Guide for contact information.
NOTE: For important operational details and warranty information,
refer to the User Manual, which can be downloaded from the Support
section of the tvONE Web site
Start Here 1
Introduction
The 32x32 ModularMX Matrix

Output bays Input bays
2
Cover plate 87
A
B
C
D
Power indicator
Quick Start Guide
Rear-Panel Layout

The following list outlines the available pre-configured options. Because this
Quick-Start Guide covers all available configurations, it is important to identify the
type of 32x32 Modular Matrix you have purchased:
• MOD-32432-DVI
Four input cards. Each card contains eight DVI inputs, providing a total of 32
DVI inputs.
Four output cards. Each card contains eight DVI outputs, providing
a total of 32 DVI outputs.
Package Includes:
(1) 32x32 Modular Matrix Frame
(1) DB-9 cable
(2) AC power cords
(4) Modular Matrix 8 DVI Input Cards
(4) Modular Matrix 8 DVI Output Cards
(1) Quick-Start Guide
• MOD-32432-DVIELR
Four input cards. Each card contains eight DVI inputs, providing a total of 32
DVI inputs.
Four output cards. Each card contains eight ELR-POL outputs. Each of these
ELR-POL outputs are connected to a Receiver unit, using a CAT-5e cable,
allowing you to extend the DVI signal up to 330 feet (100 meters). 32 ELR-
POL Receiver units are included with this package option.
Package Includes:
(1) 32x32 Modular Matrix Frame
(1) DB-9 Cable
(2) AC Power Cords
(4) Modular Matrix 8 DVI Input Cards
(4) Modular Matrix 8 DVI Sender over CAT-5 Cards
(32) DVI ELR Receivers with POL
(1) Quick-Start Guide
3
Quick Start Guide
Pre-configured Options 2

4
• MOD-32432-DPELR
Four input cards. Each card contains eight DisplayPort inputs, providing a
total of 32 DisplayPort inputs.
Four output cards. Each card contains eight ELR-POL outputs. Each of these
ELR-POL outputs are connected to a Receiver unit, using a CAT-5e cable,
allowing you to extend the DisplayPort signal up to 330 feet
(100 meters). 32 ELR-POL Receiver units are included with this package
option.
Package Includes:
(1) 32x32 Modular Matrix Frame
(1) DB-9 Cable
(2) AC Power Cords
(4) Modular Matrix 8 DisplayPort Cards
(4) Modular Matrix 8 DVI Sender over CAT-5 Cards
(32) DVI ELR Receivers with POL
(1) Quick-Start Guide
• MOD-32432-DPDVI
Four input cards. Each card contains eight DisplayPort inputs, providing a
total of 32 DisplayPort inputs.
Four output cards. Each card contains eight DVI outputs, providing a total of
32 DVI outputs.
Package Includes:
(1) 32x32 Modular Matrix Frame
(1) DB-9 Cable
(2) AC Power Cords
(4) Modular Matrix 8 DisplayPort Cards
(4) Modular Matrix 8 DVI Output Cards
(1) Quick-Start Guide
Quick Start Guide
Pre-configured Options (continued)

5
• MOD-32432-DVI1FO
Four input cards. Each card contains eight DVI inputs, providing a total of 32
DVI inputs.
Four output cards. Each card contains eight SC-type fiber optic connectors.
Each of these fiber optic connectors are connected to a Receiver unit,
allowing you to extend the DVI signal up to 6600 feet
(2 kilometers) using 50μ OM3e multimode fiber optic cable. OM3 and
OM1 fiber are also supported. See the User Manual for distance limitations
using other fiber optic cable types. 32 fiber optic Receiver units are included
with this package option.
Package Includes:
(1) 32x32 Modular Matrix Frame
(1) DB-9 Cable
(2) AC Power Cords
(4) Modular Matrix 8 DVI Input Cards
(4) Modular Matrix 8 Fiber Optic Output Cards
(32) DVI Receivers over 1FO
(32) 5V Power Supplies for the above
(1) Quick-Start Guide
Quick Start Guide
Pre-configured Options (continued)
• MOD-32432-DP1FO
Four input cards. Each card contains eight DisplayPort inputs, providing a
total of 32 DisplayPort inputs.
Four output cards. Each card contains eight SC-type fiber optic connectors.
Each of these fiber optic connectors are connected to a Receiver unit,
allowing you to extend the DisplayPort signal up to 6600 feet
(2 kilometers) using 50μ OM3e multimode fiber optic cable. OM3 and
OM1 fiber are also supported. See the User Manual for distance limitations
using other fiber optic cable types. 32 fiber optic Receiver units are included
with this package option.
Package Includes:
(1) 32x32 Modular Matrix Frame
(1) DB-9 Cable
(2) AC Power Cords
(4) Modular Matrix 8 DisplayPort Input Cards
(4) Modular Matrix 8 Fiber Optic Output Cards
(32) DVI Receivers over 1FO
(32) 5V Power Supplies for the above
(1) Quick-Start Guide
If any of the items from these pre-configured packages are missing, call tvONE
Technical Support. Refer to page 1 of this guide for contact information.

6
2. Connect up to 32 displays to the DVI outputs using DVI cables.
3. Connect both AC power cords from the matrix to available electrical outlets.
Connecting both AC power cords will provide power redundancy should
one of the power supplies fail. It is recommended to connect each AC power
cord to separate circuits.
1. Connect up to 32 DVI sources to the DVI inputs.
Quick Start Guide
Connections
MOD-32432-DVI 3

7
1. Connect up to 32 DVI sources the DVI inputs.
MOD-32432-DVIELR
2. Connect a CAT-5e cable (or better), up to 330 feet (100 meters) from each
ELR-POL jack on the Sender card to each of the included ELR-POL Receiver
units, as shown below.
Once the matrix is powered, the Link indicators will glow bright green to
indicate a solid link between the output card and the Receiver unit.
The POL indicators will glow bright amber to indicate that the Receiver unit
is being powered.
CAT-5e cable
Up to 330 feet (100 meters)
Quick Start Guide
4

8
3. Connect a DVI cable from the DVI Out port on the ELR-POL Receiver unit to
a DVI display.
4. Connect both AC power cords from the matrix to available electrical outlets.
Connecting both AC power cords will provide redundancy should one of
the power supplies fail. It is recommended to connect each power cord to
electrical outlets on two separate circuits.
Power to the Receiver unit is delivered from the power supply in the matrix
over the CAT-5e cable using Power Over Line (POL) technology.
The Link indicator will glow bright green to indicate a solid connection
between the matrix and the Receiver unit. The Power indicator will glow
bright blue to indicate that the Receiver unit is being powered.
If either of these LED indicators are off, inspect the CAT-5 cable.
DVI cable
to DVI display
DVI-ELRPOL-R
MOD-32432-DVIELR (continued)
1. Connect the up to 32 DVI sources to the DVI inputs on the matrix
using DVI cables.
2. Connect a single strand of SC-terminated 50μ OM3e multimode fiber optic
cable from each SC connector on the Sender card to each Receiver unit.
MOD-32432-DVI1FO
Multimode Fiber Optic cable
Up to 6600 feet (2 kilometers)
DVI-1FO-R
MOD-8FO-S
Quick Start Guide
5
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Conmutador de matriz de TV One

TV One
TV One MX-2522 Manual de usuario

TV One
TV One MX-5288 Manual de usuario

TV One
TV One 1T-MX-3344 Manual de usuario

TV One
TV One MX-2522 Manual de usuario

TV One
TV One MOD-32432-DVI1FO Manual de usuario

TV One
TV One MX-6388 Manual de usuario

TV One
TV One MX-6544 Manual de usuario

TV One
TV One IM-400 Series Manual de usuario

TV One
TV One MX-6388 Manual de usuario

TV One
TV One 1T-MX-6344 Manual de usuario
























