Tuff-Built BEST HOIST Pro Series Manual de usuario

Pro Series Safety Winch

Operator’s Manual

Man-Rated for:

Work Positioning

Confined Space Entry / Retrieval

Rescue

Fall Protection

Also Rated for Material Handling Applications

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

Table of Contents

1. WARRANTY INFORMATION

2. INTRODUCTION to WINCH APPLICATIONS

3. APPLICATION RESTRICTIONS

4. GENERAL SYSTEM REQUIREMENTS

5. WINCH INSTALLATION and OPERATION

6. POWER DRIVE OPTION

7. TRAINING

8. INSPECTION

9. MAINTENANCE LUBRICATION and STORAGE

10. SPECIFICATIONS

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

FIVE STAR

LIMITED WARRANTY

(Safety Equipment)

(Canada & U.S.A. Only)

Tuff Built Products Inc. hereinafter named the "Company" warrants, in accordance

with the provisions below, to each user/purchaser of new Tuff Built Products equipment

from an authorized Tuff Built Products Dealer or the “Company”, that such equipment is

free from defects in material and workmanship and will be warranted for a period of up

to 120 months from date of sale or lease to the first user/purchaser, if used and serviced

in accordance with the recommendations in the Operator's Manual. Replacement is at

the discretion of the “Company”.

The obligation of the “Company” under this FIVE STAR limited warranty is limited to

repairing, or at its option, replacing any part(s), which, in the “Company's” judgment, is

defective.

Except as set forth above, THE “COMPANY” SHALL HAVE NO OBLIGATION OR

LIABILITY OF ANY KIND ON ACCOUNT OF ANY OF ITS EQUIPMENT, AND SHALL

NOT BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES. THE

“COMPANY” MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND

SPECIFICALLY, THE “COMPANY” DISCLAIMS ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS.

The specific details of the Owner's FIVE STAR Limited Warranty, outlined in more detail

in "Limited Warranty Detail" attached to this certificate, are expressive of the quality built

into your equipment.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

Limited Warranty Detail

FIVE STAR LIMITED WARRANTY DETERMINATION

Only defective parts are covered by this FIVE STAR limited warranty. Any part or parts

of a “Company” product found to be defective for a period of up to 120 months from

date of sale or lease to the first user/purchaser, in accordance with the provisions of this

FIVE STAR limited warranty, will be repaired or replaced by a “Company” authorized

technician at the discretion of the “Company”.

ITEMS COVERED BY FIVE STAR LIMITED WARRANTY

The Tuff Built Products FIVE STAR limited warranty includes the replacement or repair

of any part on the “Company’s” new equipment purchased from an authorized Tuff Built

Products Dealer or the “Company”, which are defective in material, workmanship, or

both (as determined by an authorized representative of the “Company”).

This FIVE STAR limited warranty is only valid if the scheduled maintenance is

performed as outlined in the Operator’s Manual by a “Competent Person” and a signed

log evidencing the work performed is maintained and provided to the “Company” upon

request. A “Competent Person is a representative of the user/purchaser who has been

trained on the proper use and maintenance of purchased Tuff Built equipment by a

factory authorized trainer. A factory authorized trainer may be a representative of the

Company or other such person who has been certified by the Company.

Genuine Tuff Built Products replacement parts will be warranted for 90 days from date

of purchase, or the remainder of the original equipment limited warranty period,

whichever is longer.

OBTAINING FIVE STAR LIMITED WARRANTY SERVICE

To obtain FIVE STAR limited warranty service, contact the “Company”. Provide a

written description of the issue and provide copies of the most recent completed

scheduled maintenance logs. Such logs must be completed by a Competent Person.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

FIVE STAR LIMITED WARRANTY EXCEPTIONS

1. MODIFIED OR ALTERED EQUIPMENT - No warranty shall apply on any equipment

or parts that have been modified, or altered in any way without prior approval and

knowledge of the “Company”. Nor is there warranty if service, other than normal

replacement of service items, is performed by someone other than a “Company”

authorized technician.

2. NORMAL WEAR OR MAINTENANCE PARTS –Tuff Built Products Inc. shall not be

responsible for normal replacement parts under the provisions of this FIVE STAR

limited warranty. Consult your Operators Manual to obtain a list of affected parts and

service coverage.

3. MISCELLANEOUS - No warranty shall apply to damage resulting for accident,

misapplication, abuse, or damage caused by environment (such as exposure to

corrosive material).

ABOUT IMPROVEMENTS

Tuff Built Products Inc. is continually striving to improve its products, and therefore

reserves the right to make improvements or changes when it becomes practical and

possible to do so, without incurring any obligations to make changes or additions to the

equipment sold previously.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

HOW TO ACTIVATE AND MAINTAIN THIS FIVE STAR LIMITED WARRANTY

1. Complete and return the Limited Warranty Registration Form to the “Company”

2. Scheduled maintenance may be performed by a representative of the

“Company”, a “Company” authorized Dealer, or by the user as authorized by the

“Company” (with valid certification). Determine how you wish scheduled

maintenance to be performed and so advise the “Company”. If scheduled

maintenance is performed by the user the person(s) involved must be authorized

by the “Company” and training may be required.

3. Establish the scheduled maintenance log as outlined in the Operator’s Manual

and perform scheduled maintenance. The original is to be maintained by the

user and available to a “Company” authorized technician when required.

4. IMPORTANT. The purpose of this procedure is to ensure that equipment

manufactured by Tuff Built Products Inc. is, to the best ability of the “Company”,

available when needed to perform its function, that is save lives. Failure to follow

this procedure increases the hazard that this equipment will not be available

when needed and will void the warranty.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

Fig 1a, Fixed Handle Models Fig 1b, Removable Handle / Power Drive Models

Item Number

Description

Pinion Shaft Assembly

Drum Spool Assembly

LHS Side Plate Assembly

RHS Side Plate Assembly

Crank Handle Knob Assembly

Brake Wear Indicator Label

Brake Wear Indicator Window

Removable Handle / Power Drive Input Hub Ass’y

Rear Frame Spacer

Rear Frame Spacer Screw

Crank Handle Spring Retainer Disc

RHS Cover

RHS Cover Label

LHS Cover

Crank Handle Spring

Removable Handle Assembly

Brake Wear Indicator Window Retainer Clip

Crank Handle Spring Retainer Disc Mounting Screw

Crank Handle Knob Assembly Mounting Screw

Crank Handle Knob Assembly Retaining Screw

Long RHS Cover Mounting Screw

LHS Cover Mounting Screw

Handle Retainer Snap Ring

Short RHS Cover Mounting Screw

Figure 1, Winch Parts and Location

Note:

For purposes of honoring warranty claims, wear to brake pads, cable retainer spring bar, labels, and

winch lifelines are considered part of normal winch operation and are not covered by the warranty.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

2. INTRODUCTION to WINCH APPLICATIONS

Congratulations on your purchase of a Best Safety Systems Pro-Series Man-Rated Winch as part of your

safety at heights equipment.

Pro-Series winches combine many advanced safety features, including multiple brake pawls, a secondary

inertia actuated brake, easy to read visual brake wear indicator, visual overload indicator integral to the

snap hook, and optional usage indicator.

Some versions of these winches feature a unique drive input hub design which allows the winch to be

easily switched from a manual crank to various power drive options to allow the winch to be driven with

different types of corded and cordless power hand drills (See Section 6 for further information on Power

Drive options).

The winch may be equipped with a variety of winch line options including, stainless or galvanized steel

cable in various diameters, and ropes in various diameters and constructions to meet your specific job

requirements.

This product has been specifically designed and carefully manufactured to provide reliable operation in

many different safety-at-heights applications. These include, but are not limited to:

2.1 WORK POSITIONING

The winch may be used for the suspension of a worker at a work position for the performance of a task.

When a worker is suspended in a work seat or harness, a secondary personal fall arrest system must be

used in addition to the suspension line. Personal fall arrest systems used with this winch must meet

applicable OSHA or other local requirements.

NOTE: OSHA 29 CFR 1926 Subpart L considers this application to be a single point suspension scaffold,

and requires treatment as such.

2.2 RESCUE

The winch may be used as part of a system to allow for the post-fall rescue of a worker protected by a

personal fall arrest system. This winch meets the requirements of ANSI/ASSE Z359.4 for use as a

rescue device.

2.3 CONFINED SPACE ENTRY / RETRIEVAL and RESCUE

The winch may be used as part of a system to facilitate access to and egress from a confined space as

well as non-entry rescue in the event of an emergency. This winch meets the requirements of OSHA

1910.146, and ANSI/ASSE Z117.1 for use as a confined space entry/retrieval and rescue device.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

2.4 FALL PROTECTION WHILE CLIMBING

In situations where it is not practical to install and use a temporary or permanently installed personal fall

arrest system, the winch may be used to guard against falling while climbing a fixed ladder or other

structure. The winch line can be used as essentially a travelling anchorage connector that moves up and

down with the climber. An energy absorbing lanyard is installed between the winch line and the dorsal D-

ring on the climber’s full body harness. The winch must be operated so as to continuously eliminate any

slack in the winch line as the climber moves up and down. The winch operator must be specifically

instructed in such use of this winch. All installations must be designed, installed, and used under the

supervision of a qualified person.

2.5 MATERIAL HANDLING

The winch may be used for the raising and lowering of tools, equipment, and other material not exceeding

the rated Working Load Limit of the winch. Various jurisdictions may not allow the use of the same

equipment to move personnel and material. Be aware of and follow the regulations governing your

workplace.

3. APPLICATION RESTRICTIONS

There are restrictions and limitations that must be carefully considered in the selection, installation, and

operation of this winch. Serious injury or death may result from failure to consider these factors.

3.1 WORKING LOAD LIMIT

This winch is designed and rated to a working load limit of 1 person weighing a maximum of 310lbs

(including all clothing, tools, and equipment) when used in a 1 Part Single Reeved System, or 2 persons

weighing a maximum 620 lbs when used in a 2 Part Single Reeved System (see Figure 2).

Figure 2, 1 & 2 Part Single Reeved Systems

Please refer to the Operator’s Manual(s) for all other accessories in the system to determine which

reeving option(s) are applicable to the system.

Note: Please be aware that a 2 Part Single Reeved System is rated for a higher working load limit, but

that raising/lowering speed is only half that of a 1 Part Single Reeved System.

Ensure that all other system components have a working load limit matching that of the winch. System

rating is equal to that of the lowest rated system component.

Pro Series Safety Winch

Operator’s Manual

October 18, 2011, Rev 05

3.2 SITE CHARACTERISTICS, PHYSICAL and ENVIRONMENTAL FACTORS

Work sites have associated with them any of a number of hazards related to the site itself. These may

include, but are not limited to poisonous or explosive atmospheric conditions, poisonous or corrosive

chemical hazards, hot surfaces, electrical hazards, sharp edges, engulfment hazards, or moving

machinery.

All of these factors must be taken into consideration when selecting equipment for a given application.

4. GENERAL SYSTEM REQUIREMENTS

This winch is designed for use with a variety of accessories to perform many functions. There are

requirements common to all such systems that include, but are not limited to, the following.

4.1 ANCHORAGE STRENGTH

This winch is designed to be used in conjunction with a supporting structure capable of providing the

required anchorage strength. Supporting structures designed, manufactured, and/or approved by Tuff

Built Products Inc. will have sufficient strength for the approved application. Any supporting structure not

designed, manufactured, and/or approved by Tuff Built Products Inc. MUST BE designed, installed, and

used under the supervision of a Qualified Person.

The standards governing different situations specify various anchorage requirements. However, at no

time can the anchorage provide any less than the greater of:

-a 2:1 safety factor on the maximum arrest force (MAF) rating of any fall arrest system being used,

-a 4:1 safety factor on personnel working loads applied to the system,

-a 4:1 safety factor on material handling loads applied to the system.

Anchorages selected must meet applicable local requirements for anchorage strength.

All installations MUST BE used under the supervision of a Qualified Person.

4.2 COMPATABILITY OF CONNECTORS

Connectors used to connect components in the system must be compatible with each other to ensure

sufficient strength and eliminate the risk of accidental disengagement or rollout during use. Connectors

supplied with products designed, manufactured, and/or approved by Tuff Built Products Inc. will meet all

applicable requirements for connectors. Any connectors not supplied by Tuff Built Products Inc. MUST

BE selected and approved by a Qualified Person.

4.3 FULL BODY HARNESS

Use only a full body harness designed, tested, and approved for fall arrest when connecting a person to

this winch. Body belts or straps do not provide adequate support to the body to prevent serious injury or

death in the event of a fall.

Tabla de contenidos

Otros manuales de Cabrestante de Tuff-Built

Tuff-Built

Tuff-Built Best Hoist 60138 Manual

Manuales populares de Cabrestante de otras marcas

WARRIOR

WARRIOR Trojan 40PUS12 Guía de referencia rápida

SVERO

SVERO 16 Manual de usuario

Warrior Winches

Warrior Winches C10000NH Manual de usuario

Badland Winches

Badland Winches 68146 Manual de usuario

Bush

Bush II Series Manual de usuario

Badland

Badland APEX 5500 Manual de usuario

Quadratec

Quadratec Q9000 Synthetic Manual

C-Max

C-Max VIGO Manual de usuario

Comeup

Comeup DV-9 Manual de usuario

Orvea

Orvea Italwinch 805 Manual de usuario

Prowinch

Prowinch PWJTHF300 Manual de usuario

Clas Ohlson

Clas Ohlson LD2000-A Manual de usuario

Topex

Topex 97X080 Manual de usuario

Eastbound

Eastbound MotoWinch 1707001 Manual de usuario

Runva

Runva EWD8000 Guía de referencia rápida

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Guía de instalación

Granit

Granit 11157675 Manual de usuario

TREX

TREX TB75 Manual de usuario