Tsun Talent-MG2-WP Manual de usuario

Talent-MG2-WP
Talent-MG2-GP
TSUNESS Co., Ltd
STORE THE FUTURE
User Manual

Talent-MG2-WP/GP
www.tsun-ess.com
CONTENT
Read Me First 1
2
Warning 1
Contact 1
Talent-MG2 Monitoring System
Packing List 2
3
Installation
Technical Data 4
Installation
5
Wi-Fi Configuration (Only Talent-MG2-WP)
LED Description 8
7
Website Configuration 9
Remote active power control function 15
Step 1: Install the microinverter and the monitoring device 9
Step 2: Establish an account 9
Step 3: Networking for the monitoring system 10
Step 5: Edit the system layout 14
DRM function 15
Zero export control function 16
Step 1: Confirm the export control type 16
Step 2: Confirm the grid type 16
Step 3: Confirm the loads’ capacity for CT and Meter 17
Step 4: Install the meter and CT
Step 5: Connect the meter to the RS485 port of monitor device
Step 6: Set zero export function on the monitor platform
18
20
21
Step 4: Create a Plant 12

Talent-MG2-WP/GP
www.tsun-ess.com
1
Warning
Contact
Dear customer, thank you for choosing the TSOL-M Series micro inverter from TSU-
NESS. We hope you will find our products meet your needs for renewable energy.
Meantime, we appreciate your feedbacks regarding our products.
This manual contains important instructions for Talent-MG2 Monitoring System. For
safety, only qualified technician, who has received training or has demonstrated skills can
install Talent-MG2 Monitoring System under the guide of this document.
If you have technical problems about our products, contact the TSUN Service line.
Read Me First
Only qualified personnel should install, troubleshoot, or replace the monitoring
system.
Before installation, check the unit to ensure absence of any transport or
handling damage, which could affect insulation integrity or safety clearances.
All repairs should be carried out using only qualified spare parts, which must be
installed in accordance with their intended use and by a licensed contractor or
authorized TSUNESS service representative.
el: +86-573-8466 8569T
Add: Building E1, No. 555, Chuangye Road, Dayun Town, Jiashan County,
Jiaxing City, Zhejiang Province, China
TSUNESS Co., Ltd

Object
a
b
c
d
Antenna
Adaptor
Bracket
Monitor Device
Description Quantity
1
1
1
2
2
www.tsun-ess.com
The Monitor Device is the key component in Talent-MG2 monitoring system. It is the
relay station of the monitoring system, which operates between the microinverters and
the Monitoring Server. The Monitor Device communicates with the microinverters in the
system via 2.4G RF wireless to collect the data and status of the microinverters in the
system. At the same time, Monitor Device connects to the Internet through WIFI
(Talent-MG2-WP) or GPRS (Talent-MG2-GP), which realizes the information exchange
with the monitoring service and sends all the running data of microinverters and status of
the system to the monitoring server. It receives the control commands from the
monitoring server and sends the data to the microinverters in the system to achieve
remote operation and maintenance.
Talent-MG2 Monitoring System
Packing List
a
c d
b
Talent-MG2-WP/GP

* Only Talent-MG2-G has a SIM Card Slot.
Installation
Object
A
B
C
D
E
F*
G
H
Object
I
J
K
L
M
N
O
Description
DRM Port (For Australia)
Ethernet Port
USB Port
Reset Hole
Power Port
Antenna (2.4G)
Installation Hole
Description
Power LED
Communication LED (Server)
Communication LED (Inverter)
Alarm LED
SD Card Slot
SIM Card Slot
Antenna (Wi-Fi/GPRS)
RS485 Port
Talent-MG2-WP/GP
3
www.tsun-ess.com

Model Talent-MG2-WP Talent-MG2-GP
Communication to Microinverter
2.4G RF
100m
99 panels
Per 15 minutes
Wi-Fi (802.11b/g/n) GSM (850/900/1800/1900MHz)
RS485
500m
External plug-in adapter
100 to 240V AC / 50 or 60Hz
5V DC / 2A
2.5W(typical), 5W(maximum)
-20~+55
200*101*29
0.2
Wall mounting / Desktop mounting
4 LED
Signal
Maximum Distance(Open Space)
Monitoring Data Limit
Communication to Server
Sample Rate
Signal
Communication to Meter
Signal
Maximum Distance (RS485 Cable)
Input Voltage/Frequency
Output Voltage/Current
Power Consumption
Mechanical Data
Ambient Temperature(℃)
Dimensions (W*H*D mm)
Weight (kg)
Mounting System
Indicator Light
Power Supply (Adapter)
Type
Technical Data
4
www.tsun-ess.com
Talent-MG2-WP/GP

5
www.tsun-ess.com
1.Take two antennas out from the box, screw the antenna into the Wi-Fi/GPRS port and
2.4G port.
Note: While installing Talent-MG2-GP, there are a GSM antenna and a 2.4G antenna.
Do not insert the antenna to the wrong port.
Note: While the monitor device is installed inside the metal box or under the metal /
concrete roof, extended 2.4G cable or 2.4G sucker antenna will be suggested.
2.Insert the SIM Card into the SIM Card Slot, press the SIM Card in until you heard “Click”
(only for Talent-MG2-GP).
3.Screw the bracket on the wall and use at least two screw holes (one from each side) to
fix the bracket (the M4 screws need to be prepared by installer).
Installation
Talent-MG2-WP/GP

6
www.tsun-ess.com
4.Match the bracket’s upper buckle with monitor device. Then match the bracket’s lower
buckle by gently press the lower side of the monitor device until hear the“Click”.
Note: Make sure the antennas are vertical to the wall.
5.Power on the monitor device.
Note: Monitor device could also be put on the table. Make sure the antennas are vertical
to the table.
Talent-MG2-WP/GP

4.Click the search button in the lower right corner, select the Wi-Fi name to be connected
to the monitoring device.
5.Enter the password and click Save.
Wi-Fi Configuration (Only Talent-MG2-WP)
1.Connect the wireless name of MG2-W via computer or mobile phone.
2.Open the browser and enter 10.10.100.254 to open the Wi-Fi configuration page. The
username and password are ‘admin’ by default.
3.Click the Wi-Fi parameter menu on the left menu bar to enter the Wi-Fi parameter
configuration.
Talent-MG2-WP/GP
7
www.tsun-ess.com

LED Description
6.Click Restart.
LED Mark LED Color Explanation
Monitor device power on or power off
Network communication
Microinverter communication
Fault State
LED
All LEDs
Status
Firmware upgrading
Description
Talent-MG2-WP/GP
www.tsun-ess.com
8
Este manual sirve para los siguientes modelos
1
Tabla de contenidos

















