Truweigh Note Manual de usuario

NOTE USER GUIDE

Thanks for purchasing the NOTE Digital Mini Scale! This

User Guide is designed to get you up and running quickly

with your scale. Scales are precision instruments and

require proper care and skill to get the best results. If you

have questions or need support, visit us at http://www.

truweigh.com/support or scan the QR Code on the back of

this manual using your smartphone.

What’s In The Box

Key Descriptions

ON/OFF - Turns the scale ON or OFF.

MODE - Changes the weighing unit.

TARE - Zero’s the scale. Also subtracts the weight of an

empty container (see Tare Function).

PCS - Enters Counting Mode (see Counting Function)

NOTE Digital

Mini Scale

One CR2032

Battery

User Guide

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

PCSMODE ZERO/TARE

ON/OFF

Weighing Your First Item

1. Press the ON/OFF key to

turn the scale on.

2. Place the item on the center

of the weighing platform.

3. Take your reading from

the display. You can press

the MODE key to convert

between weighing units.

4. The scale’s auto-o function

will turn the scale o after 3 minutes of inactivity or

you can press the ON/OFF key to turn the scale o.

Counting Function

1. Place a sample quantity of 25, 50, 75 or 100 pcs of

the item you want to count on the platform.

1. Press and hold the PCS key to enter counting

setup.

2. Tap the MODE key to select your sample quantity.

3. Press the PCS key to conrm the sample qty and

set the average piece weight (APW) in memory.

4. You may now place any quantity on the scale and

view the piece count. (‘pcs’ will show on the display)

Things To Avoid

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Unlevel Surfaces

Air Currents

Radio Frequency

Interference

Vibration

High Humidity

Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Tare Function

The Tare function allows you to subtract the weight of a

container so that the display only shows the weight of the

contents.

NOTE: The weight of the container will subtract from

the available capacity and will leave a negative value

on the display once the weight is removed. Press

TARE again to return the display to zero.

Auto-Off

By default, the scale will auto-o after 180 seconds of

inactivity. To change or disable the auto-o timer:

1. Turn the scale on and wait for the display to zero.

2. Press and hold the TARE key until the display shows

the current auto-o setting (ie 180), then release.

3. Press the MODE key to change the auto-o setting

between 180 sec,120 sec, 60 sec, or 0 sec (auto-o

disabled).

4. Press ON/OFF to turn the scale o when nished.

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Press the TARE

key to subtract the

container’s weight.

Add items to the

container to see their

weight on the display.

Place an empty tray

or container on the

platform.

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Accuracy

Your scale comes calibrated from the factory and most

users wont need to calibrate their scale for a long time.

You should check your scale’s accuracy periodically

using calibration weights and perform calibration if

necessary. NOTE: Only use trusted calibration weights.

Calibration

Calibration is permanent and should only be

performed using accurate calibration weights

that match the requirements for your scale.

Do not use coins or other household items to

calibrate.

1. Prepare the required weight for your scale.

(see chart on back)

2. Find a at and level surface to perform calibration

and let the scale adjust to room temperature.

3. Press ON/OFF to turn the scale on and wait for the

scale to stabilize.

4. Press and hold the MODE key until the display

shows ‘CAL’.

5. Make sure nothing is on the platform then press

MODE to conrm the zero point.

6. The display will then ash the required calibration

weight.

7. Place the required

calibration weight on the

center of the platform.

8. The display will show ‘PASS’

then return to normal

weighing mode. You may

now turn the scale o or

continue weighing.

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Radio Frequency

Interference

Unlevel Surfaces High Humidity

Air Currents Vibration Extreme Temps

Specications

NO-100-01

Max Capacity 100 g / 3.527 oz / 3.215 ozt/ 64.30 dwt / 500.00

ct / 1543.2 gn

Readability 0.01 g / 0.001 oz / 0.001 ozt / 0.01 dwt / 0.05 ct

/ 0.2 gn

Weighing

Units g, oz, ozt, dwt, ct, gn

Dimensions

Overall: 3.0 in x 3.3 in 0.6 in

Platform: 1.9 in x 2.7 in

Display: 0.4 in x 0.9 in

Calibration

Weight 100g

Power 1 x CR2032 Batteries

Warranty 10 Year Limited Warranty

For more information, including

weighing tips and support, scan

this code with your smartphone

Or visit us online at

truweigh.com/support/

Tabla de contenidos

Otros manuales de Escala de Truweigh

Truweigh

Truweigh GENERAL Series Manual de usuario

Truweigh

Truweigh CLASSIC CL-100-01 Manual de usuario

Truweigh

Truweigh OMNI Manual de usuario

Truweigh

Truweigh ENIGMA Manual de usuario

Truweigh

Truweigh GAUGE Manual de usuario

Truweigh

Truweigh ECHO Manual de usuario

Truweigh

Truweigh Force Manual de usuario

Truweigh

Truweigh ELEMENT Manual de usuario

Truweigh

Truweigh LUX Manual de usuario

Truweigh

Truweigh MOBI Manual de usuario

Truweigh

Truweigh TUFF-WEIGH Manual de usuario

Truweigh

Truweigh Xeno Manual de usuario

Truweigh

Truweigh RIOT Manual de usuario

Truweigh

Truweigh STORM Manual de usuario

Truweigh

Truweigh MOBI-650-1 Manual de usuario

Truweigh

Truweigh Wave WA-5000-1-BK Manual de usuario

Truweigh

Truweigh MOXIE Manual de usuario

Truweigh

Truweigh HOOK Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario