Trust SECURITY PLUS-LINE ALSIR-2000 Manual de usuario

www.trust.com

SECURITY PLUS-LINE

ALSIR-2000

ALSIR2000 SIREN

Item 71112 Version 1.0

Visit www.trust.com

for the latest instructions

USER MANUAL

MULTI LANGUAGE

Red LED indicator

Learn button 2 sec

Arm

4 sec

ON button

O

1.5 sec

85 sec.

O

OFF button

4 sec

O

1.5 sec

Tamper switch

910

11 12

Learn button

2 sec

6 sec

1 sec

ALSIR-2000 SIREN

1. Place batteries

Open the Siren by unscrewing the two screws beneath the light cap. When the screws are removed

the cap of the Siren can be slid open. When the cap of the Siren is slid open place 4x Alkaline D type

1.5V battery in the Siren. Observe the correct polarity of the batteries. When the battery is low the

Siren will give 1 beep every 5 seconds while entering arm/disarm mode for the duration of 3 minutes.

2. LED indicator

The Siren has a LED indicator in the light cap. The LED behaviour is as followed.

Conﬁrm pair: LED will blink 5 times

Conﬁrm unpair: LED will blink 5 times

Learn mode: LED will blink for 15 sec.

3. Learn mode

When the Siren is disarmed slide open the cap and press and hold the Siren learn button for about 2

seconds to enter learn mode. The LED of the Siren will be blinking (in the light cap). The learn mode

lasts 15 seconds. While in learn mode press the SET button on a sensor to pair it with the Siren (check

manual of the sensor how to pair it). The LED of the Siren will ﬂash quickly 5 times to conﬁrm the

pairing was successfully. Close the cap of the Siren.

4. Arm the ALSIR

To arm the Siren press and hold the ON button for 4 sec on the ALKCT-2000.

If the Siren is armed successfully the LED on the ALKCT will light up for 1.5 seconds.

5. Walk-out time

When the Siren is armed there is a 85 sec walk-out time. Within these 85 sec the system checks all

the sensors if they are responding and it is possible to leave the building without triggering the alarm.

When at the beginning of the walk-out time a window or door is open the alarm will go o for 20 sec

reminding that one of the doors or windows isn’t closed. After the window or door sensor is closed

the alarm will stop and continue in armed mode.

ALSIR-2000 SIREN

6. Disarm ALSIR

To disarm the Siren press hold the OFF button for 4 sec on the ALKCT-2000.

If the Siren is disarmed successfully the LED on the ALKCT will light up for 1.5 seconds.

7. Tamper switch

The Siren contains a tamper switch. This is a switch that prevents the Siren from being moved when

it is armed. The tamper switch is pressed when the Siren is mounted on a wall or placed on another

ﬂat surface. When the Siren is moved and it is armed the tamper switch will activate the alarm

immediately.

8. ALSIR placement

When placing the Siren on a wall keep attention that the tamper switch isn’t placed on a groove or

crack in the wall. Make sure that the tamper switch is placed on a location of the wall where it is ﬁrmly

pressed

9. Mount the ALSIR

To mount the Siren slide the cap o (see step 1) and screw the casing with screws on a ﬂat surface

according to the screwholes. (Screws are included). Keep attention that the tamper switch is pressed

to the surface after mounting the Siren.

10. Close the ALSIR

Place the batteries in the Siren (see step 1) and slide the cap back on. Screw the screws back in

to secure the cap. When the Siren is triggered by a sensor it will ﬂash and sound the alarm for

approximately 4 minutes.

11. Delete all paired devices

To delete all the devices that are paired with the Siren press the Siren learn button for 2 seconds untill

the LED is blinking. Release the button and press the button for another 6 seconds. The LED will begin

to ﬂash quickly. Release the learn button and press it again for 1 sec to delete all paired devices.

ALSIR-2000 SIREN

12. ALSIR ﬂash behaviour + sound

Siren alarm: Siren will ﬂash + sound for 4 min

Low battery: Siren will ﬂash + sound if alarm active

Door/window open in walk-out time: Siren will ﬂash + sound for 20 sec when the Siren is armed

ALSIR-2000 SIREN

Otros manuales para SECURITY PLUS-LINE ALSIR-2000

Tabla de contenidos

Idiomas:

Otros manuales de Sistema de seguridad de Trust

Trust

Trust 200AF Manual de usuario

Trust

Trust SECURITY PLUS-LINE ALSET-2000 Manual de funcionamiento

Trust

Trust 200SA Manual de usuario

Trust

Trust SECURITY PLUS-LINE ALSIR-2000 Manual de usuario

Trust

Trust SECURITY PLUS-LINE ALSIR-2000 Manual de usuario

Trust

Trust SECURITY PLUS-LINE Manual de usuario

Trust

Trust SECURITY PLUS-LINE ALSET-2000 Manual de usuario

Trust

Trust 140BM LCD WIRELESS OBSERVATION SYSTEM Manual de usuario

Trust

Trust 200DS Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario