Trust GEFORCE 256 32MB AGP Manual de usuario
Trust GeForce 256 32MB AGP
GB
TRUST GEFORCE 256 32MB AGP
Instruction manual
Version 1.0
Trust GeForce 256 32MB AGP
01 UK 11667 GEFORCE256.doc
Thank you
Thank you very much for purchasing this product from the Trust range. We wish you hours of fun
with it. Please read this manual carefully before using the product.
Registration
Register your purchase now at the Trust Internet site (www.trust.com) and you could win one of
the fabulous prizes. The website is also the place to look for dealer addresses, comprehensive
product information, drivers and FAQ's (Frequently Asked Questions).
Copyright statement
No part of this instruction manual may be reproduced or transmitted, in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval
systems, for any purpose other than the purchaser's own personal use, without prior written
permission from the manufacturer.
Disclaimer statement
The manufacturer specifically disclaims all warranties, either express or implied, including, but not
limited to, implied warranties for the marketability and suitability for a particular purpose, with
respect to the software, the accompanying product manual(s) and written material, and all other
accompanying hardware. The manufacturer reserves the right to revise or make improvements to
its product at any time and without obligation to notify any person of such revisions or
improvements.
In no event shall the manufacturer be liable for any consequential or incidental damages, including
any loss of business profits or any other commercial damages, arising out of the use of its
products.
All company or product names are trademarks or registered trademarks of their respective
owners.
Trust GeForce 256 32MB AGP
1
GB
Contents
1. Introduction ..................................................................................................................................... 2
1.1 Contents of the package ............................................................................................................ 2
2. Safety................................................................................................................................................ 3
2.1 Minimum system requirements ..................................................................................................3
2.2 Installing the Trust GeForce 256 32MB AGP............................................................................. 3
3. Software installation ....................................................................................................................... 4
3.1 Installation of the driver in Windows 95...................................................................................... 4
3.2 Installation of the driver in Windows 98...................................................................................... 6
3.3 Installation of the driver in Windows NT4................................................................................... 8
3.4 Installation of the driver in Windows 2000.................................................................................. 8
3.5 Installing DirectX7 .................................................................................................................... 11
4. Changing the settings .................................................................................................................. 12
5. Troubleshooting............................................................................................................................ 15
6. Specifications ................................................................................................................................ 16
7. Trust Service Centres ................................................................................................................... 17
Trust GeForce 256 32MB AGP
2
1. Introduction
This manual is intended for users of the Trust GeForce 256 32MB AGP. No prior knowledge is necessary to
install and use this product.
If you have any questions after reading this instruction manual, please contact one of the Trust
Service Centres. You can find your nearest Service Centre at the end of this manual. You can also
visit the Trust website (www.trust.com) for support, detailed product information, drivers and FAQ's
(Frequently Asked Questions).
The following conventions have been used in this manual to indicate instructions:
<key> Here you should press a key. The name of the key is given between brackets.
‘System’ This is a specific term used in a program. These are the terms used by, for example,
Microsoft Windows 95.
[DIR] Key in the text shown in square brackets [….].
(term) The text between the parentheses {….} is the English term, e.g. (File) used in the figure
referred to.
Additional information will be shown as follows:
Note: Turn off the computer before connecting the product.
1.1 Contents of the package
Please check the contents of the package before reading the instruction manual. It should contain the
following:
•Trust GeForce 256 32MB AGP VGA card
•CD-ROM containing the drivers, applications and instruction manual
•The quick installation manual
Please contact your dealer if anything is missing or damaged.
Trust GeForce 256 32MB AGP
3
GB
2. Safety
Before using the product, please read the following instructions carefully.
1. Computer components are sensitive to static electricity. You can discharge yourself by touching the
computer casing.
2. Switch off the computer and remove the plug from the wall socket before opening the computer.
3. Make sure that the components you are adding to your computer are compatible with your system.
4. Hardware installation.
2.1 Minimum system requirements
•Pentium II processor
•64 MB RAM
•Windows 95 OSR2, 98, 2000 of NT4 (Service Pack 3)
•Free AGP slot
•25 MB free hard disk space
•4x CD-ROM drive
2.2 Installing the Trust GeForce 256 32MB AGP
Note: If another VGA card (the card you connect the monitor to) is still in your system, then you should
remove this before you install the Trust GeForce 256 32MB AGP.
1. Turn off your PC.
2. Remove the plug from the wall socket.
3. Remove the computer casing (if necessary, read your computer's instruction manual).
4. Remove the metal cover plate or your old VGA card from the AGP slot.
5. Insert the Trust GeForce 256 32MB AGP into the AGP slot (brown colour) and screw the card firmly into
place.
6. Close the PC.
7. Connect the monitor cable.
8. Turn on the computer.
Trust GeForce 256 32MB AGP
4
3. Software installation
3.1 Installation of the driver in Windows 95
Note: The driver for the Trust GeForce 256 32MB AGP only works in Windows 95 OSR2 with an
installed USB supplement. See your computer's instruction manual for more information.
1. Start Windows 95.
2. A ‘Standard PCI Graphics Adapter (VGA)’ will be automatically detected. Click on 'Next' (see figure 1).
Figure 1: Automatic detection in Windows 95
3. On the next screen, click 'Other locations' (see figure 2).
Figure 2: Installation in Windows 95
4. Insert the CD-ROM with the drivers into your CD-ROM drive.
Trust GeForce 256 32MB AGP
5
GB
5. Give the location as [D:\Win95] and click on 'OK' (see figure 3).
Figure 3: Installation in Windows 95
6. The driver for the 'Trust GeForce 256 32MB AGP' will be found. Click 'Finish' to complete the installation
(see figure 4).
Figure 4: Installation in Windows 95
Windows may request the driver again. If it does, give the location as [D:\Win95] again.
7. Restart your computer.
You have now completed the installation of the driver. Continue to chapter 3.5 for the installation of DirectX7.
Trust GeForce 256 32MB AGP
6
3.2 Installation of the driver in Windows 98
1. Start Windows 98.
2. A ‘Standard PCI Graphics Adapter (VGA)’ will be automatically detected. Click on 'Next' (see figure 5).
Figure 5: Automatic detection in Windows 98
3. Select Windows to search for the best driver. Click on 'Next' (see figure 6).
Figure 6: Installation in Windows 98
4. Insert the CD-ROM with the drivers into your CD-ROM drive.
Trust GeForce 256 32MB AGP
7
GB
5. Select Windows to search in a specific location. Give the location as: [D:\WIN98]. Click on 'Next' (see
figure 7).
Figure 7: Installation in Windows 98
6. The driver will be found. Click on 'Next' (see figure 8). The driver will be installed.
Figure 8: Installation in Windows 98
7. Click 'Finish' to complete the installation (see figure 9).
Figure 9: Installation in Windows 98
Trust GeForce 256 32MB AGP
8
8. Restart your computer.
You have now completed the installation of the driver. Continue to chapter 3.5 for the installation of DirectX7.
3.3 Installation of the driver in Windows NT4
Note: You must have at least Service Pack 3 installed before you install the Trust GeForce 256 32MB
AGP.
1. Start Windows NT and log in as 'Administrator'.
2. Go to 'Start - Settings - Control Panel' and then double click on the 'Display' icon. Click on the 'Settings'
tab.
3. Click on 'Monitor' and then click on 'Change'.
4. Insert the CD-ROM with the drivers into your CD-ROM drive.
5. Click on 'Disk' and give the location as [D:\WinNT4]. Click on 'OK'.
6. Select the ‘Trust GeForce 256 32MB AGP’. Click on 'OK'.
7. Follow the on-screen instructions to complete the installation.
8. Restart your computer.
Your system is now ready for use.
3.4 Installation of the driver in Windows 2000
1. Start Windows 2000 and log in as 'Administrator'.
2. The new hardware will be detected. Click on 'Next' (see figure 10).
Figure 10: Automatic detection in Windows 2000
Tabla de contenidos
Otros manuales de Hardware de computadora de Trust
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
