E522EN_06.DOC Safety 3
1. Safety
¾Read the operating manual and the safety information (order
no. 1239438, red document) in their entirety before starting up
the machine. Closely follow the instructions given.
¾Read the operating manual and the safety information (order
no. 125699, red document) in their entirety before starting up
the machine. Closely follow the instructions given.
¾Comply with the safety regulations in accordance with
DIN VDE, CEE, AFNOR as well as any other regulations that
apply in the individual countries.
Danger
Risk of fatal injury from electric shock!
¾Remove the plug from the plug socket before undertaking any
maintenance work on the machine.
¾Check the plug, cable and machine for damage each time
before using the machine.
¾Keep the machine dry and do not operate it in damp rooms.
¾Connect the earth leakage (EL) circuit breaker with a maxi-
mum release current of 30 mA when using the electric tool
outside.
Warning
Risk of injury due to improper handling!
¾Wear safety glasses, hearing protection, protective gloves
and work shoes when working at the machine.
Warning
Risk of injury to hands
¾Do not reach into the processing line with your hand.
Caution
Damage to property due to improper handling!
Machine will be damaged or destroyed.
¾Do not use the power cable to carry the machine.
¾Always lay the electrical cable away from the back of the
machine and do not pull it over sharp edges.
¾Have servicing and inspections of hand-held electric tools
carried out by a qualified specialist. Only use original acces-
sories provided by TRUMPF.
USA/CAN
Other countries
