14. Depending on the usage scenario:
Enter a period in the input line, e.g., when connecting to a video conferencing server
Take and leave the podium in a role-based conference.
15. Make an audio remark in a role-based conference:
By giving this button a single press, you can open the audio remark menu, while you need to press
the OK button to start broadcast and OK or return buttons to stop broadcast
Push and hold this button to open the audio remark menu and talk until the button is released.
2.3. Managing multiple endpoints using a single remote control
You can manage several TrueConf Videobar endpoints simultaneously using a single remote control. To
do it, you should bind your remote control with each device as follows:
1. Press the OK and asterisk buttons on your remote control simultaneously and hold them — the LED
will start blinking after 3 seconds.
2. Release the buttons — the LED will keep blinking.
3. Turn on the endpoint.
4. If the binding is successful, the LED will be coming on for 2 seconds and then turn off. Otherwise, if
there is a pairing error, the LED will be quickly blinking for 20 seconds and then will be slowly blinking
for 3 seconds. After that, the remote control will go into sleep mode.
To unbind the remote control from TrueConf Videobar:
1. Turn on the endpoint.
2. Press the OK and hash buttons simultaneously and hold them down on your remote control for 3
seconds — the LED will start blinking.
3. Release the remote control buttons — the LED will turn off, while the device will be unbound.
Otherwise, if there is an error, the LED will be blinking for 20 seconds, while the remote control will go
into sleep mode.
2.4. Starting the endpoint and adjusting network settings
To turn on the device, hold down the power button on the remote control for 2 seconds. The endpoint
automatically turns on when power is on.
Once the endpoint has been turned on, the home screen will be displayed on the main display.
The notification bar is located at the top of the screen, where the device status icons are displayed:
Bluetooth connection
“Do not disturb” mode (active/inactive)
Wi-Fi or Ethernet network connection
Current time.
First of all, you should connect to a network. By default, the device is set to operate in an Ethernet
network and automatically receive connection parameters via HDCP. Just plug an Ethernet cable into
your endpoint and wait for the authorization window to appear.
If necessary, you can manually set up an Ethernet or Wi-Fi connection by going to the system settings in
To make sure you enjoy the best audio and video quality, your communication channel should
meet our bandwidth requirements. We recommend using a wired connection if possible.
i
