Tru-Test EziWeigh7 Manual de usuario
1
EziWeigh7 Quickstart Guide
EN
1Unpack the box
EziWeigh7 weigh scale
indicator (the indicator)
Bracket mounting kit
Mains power adaptor with
regional plug options
USB cable for charging
and connecting to a PC
USB ash drive/CD - Contains EziLink™
software and reference information.
EziLink is a computer software application
used to manage information recorded on
the indicator.
7
2Charge the battery
To charge, connect the USB cable to both the power
adaptor and indicator, then plug into the mains socket.
A battery indicator on the Weight screen scrolls when
the battery is charging.
Note: When the indicator is unplugged from the power supply, the battery indicator displays the battery charge level.
2
EziWeigh7 Quickstart Guide
EN
3Getting around
Turn the indicator ON/OFF. Go deeper into a sub-menu or select
an option.
Record an animal’s weight and any other
information that has been entered. Scroll through a list of options.
Zero the scale manually. Escape out of a sub-menu back to the
next tier up.
Access the main menu.
The top level of menus includes:
Battery indicator
Weight screen
Data screen
Alpha numeric keypad
Load bar connector
Bluetooth®connection status
Stable light
Load bar connector
Power/Communication connector
> Statistics - View statistics for the current session, or for previously recorded sessions.
> Clear last record - Delete the last record in the current session.
> Sessions - Start a new session or delete sessions.
> Setups - Change indicator settings and enable extra features.
Note: To change the language, date and time for your region, scroll through the options in the Setups sub-menu.
3
EziWeigh7 Quickstart Guide
EN
4Install the hardware
See section 5
Mount the indicator bracket onto a at surface
(timber rails, concrete) or pipe-work.
Connect the load bar cables to the indicator.
If using an XRP2 Panel Reader, install and connect
to the indicator (see the XRP2 Panel Reader’s User Manual).
Install load bars under the platform on a rm, level
surface (see the Load Bar User Manual).
5 Connect to a Tru-Test EID Stick Reader (if applicable)
To establish a Bluetooth wireless connection between the indicator and a Tru-Test EID Stick Reader, you need to
‘pair’ the two devices.
a. Turn on the indicator with the stick reader well within range.
b. Press the Read button to turn on the stick reader.
After approximately one minute, the pairing is complete and a connection is
established. Once paired, the stick reader’s Blue LED will illuminate and an arrow ()
will appear on the indicator’s Weight screen beside the Bluetooth symbol.
Now that pairing is complete, subsequent connections should be virtually instant.
c. Use the stick reader to scan an EID tag in order to test the connection.
Note: See the Tru-Test EID Stick Reader User Manual for more information and troubleshooting.
4
EziWeigh7 Quickstart Guide
EN
6Weigh animals
a. Turn on the indicator and check that the scale is displaying a zero weight. By default, the scale automatically zeroes
itself when a load is removed from the weighing platform or when the indicator rst powers up.
b. Start a new recording session. Press , scroll down to sessions , and press twice.
The indicator will display “Started”. Press twice to navigate out of the menu.
c. Move the animal onto the platform and check that the weight is as expected.
d. If recording IDs, enter the animal’s VID using the alpha numeric keypad, or scan the animal’s EID
tag using an EID reader.
e. If desired, press to enter a comment about the animal, using the alpha numeric keypad.
f. Wait for the stable light to illuminate and press . This records the weight plus the ID and comment if entered.
g. Repeat steps c-f for all animals in the session.
h. After weighing, you can view statistics for the weighing session. Press to display the Statistics option.
Press and press to scroll through the statistics.
EID VID
Note: If there are problems with inaccurate weights or zeroing, check for binding or dirt build-up and ensure the
load bars are properly connected.
5
EziWeigh7 Quickstart Guide
EN
7Using the EziLink™ software
8Using the Android* Smartphone app
a. Connect the indicator to the PC using the supplied USB cable.
b. Launch the EziLink application.
c. Wait for the indicator to connect to the PC (this may take up to a minute).
d. Click one of the menu options:
The Tru-Test Data Link app is available to download for free from the Google Play* store.
The app allows you to email a session le or register a transaction with NAIT or NLIS.
Instructions for using the Tru-Test Data Link app are available on the Tru-Test website www.tru-test.com.
Before you begin: If you haven’t done so already, install EziLink on your PC. To do this, insert the USB ash drive into a USB
port or insert the CD into the CD drive on your PC and follow the instructions.
Save sessions or cross reference
information on the PC
Transfer cross reference information
to the indicator
Delete sessions
6
EziWeigh7 Quickstart Guide
EN
9Getting the most from your indicator
The EziWeigh7 has a number of features which enable you to get more out of the indicator and speed up data entry.
See the EziWeigh7 User Manual for more information.
ID cross
reference
The indicator can automatically display an animal’s VID when the EID is scanned. This requires a cross
reference le to be uploaded using EziLink.
Weight Gain During weighing, weight gain per day will be displayed if a weight has previously been recorded for
the same animal and the record is still on the indicator.
Drafting (sorting) The indicator aids two or three way drafting (sorting) by displaying the draft (sort) direction on the
Data screen.
Statistics The weight and draft (sort) statistics for the current or previous sessions can be
displayed on the indicator.
Auto Record Auto recording can be used in order to speed up weighing as there is no need to press record.
Prex You can set the indicator to automatically apply prexes to the VID as you enter them.
This saves time typing.
Auto Increment
VID
To save time when tagging and weighing animals, you can set the VID eld to
automatically increment for each new animal.
Repeat Automatically repeats a comment.
Caring for the indicator
Do not leave the indicator or load bars in water. Store the indicator in a cool, dry place.
Wipe the indicator using a damp cloth, warm water and soap. Other cleaners may damage the case.
Do not leave the indicator where it may be exposed to extreme temperatures (e.g. on the dashboard of a vehicle).
Fit the dust caps when there are no cables connected to the indicator. This will prevent moisture and dirt from entering the
connectors.
Support
For support, service and warranty information, see www.tru-test.com
More information
For further details refer to the EziWeigh7 User Manual, available on the USB ash drive/CD and at www.tru-test.com
7
EziWeigh7 Quickstart Guide
EN
Compliance
FCC notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/ TV technician for help
FCC warning
Note: Users are cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Industry Canada notice
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
EC Declaration of Conformity
Tru-Test Limited hereby declares that the EziWeigh7 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at http://livestock.tru-test.com/compliance
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use by Tru-Test Limited is under licence.
All trademarks with an * are not owned by Tru-Test Limited and belong to their respective owners.
8
Manual Básico Do EziWeigh7
PT
1Desembalar a caixa
Indicador Eziweigh7
Conjunto de braçadeira
de instalação
Adaptador de energia de
rede com chas regionais
opcionais
Cabo USB para o
carregamento e a
conexão a um PC
Unidade pendrive USB/CD - Contém o software
EziLink™ e informações de referência. EziLink é uma
aplicação de software de computador usada para
administrar as informações registradas no indicador
7
2Carregar a bateria
Para carregar conecte o cabo USB ao adaptador de
energia e ao indicador e insira a cha na tomada de
rede. Um indicador da bateria no visor de pesagem se
movimentará quando a bateria estiver sendo carregada.
Observação: Quando o indicador da bateria for desconectado da fonte de alimentação, o indicador da bateria mostrará o
nível de carga da bateria.
MANUAL BÁSICO DO
9
Manual Básico Do EziWeigh7
PT
3Conhecer o aparelho
Ligar e desligar o indicador. Entrar em sub-menus ou selecionar
uma opção.
Registrar o peso de um animal e todas as outras
informações introduzidas. Rolar em uma lista de opções.
Zerar a balança manualmente. Sair de um sub-menu e voltar ao nível
superior.
Acessar o menu principal.
O nível superior dos menus inclui o seguinte:
Indicador da bateria
Indicador do peso
Indicador de dados
Teclado alfanumérico
Conector de barras de carga
Status de conexão Bluetooth®
Luz estável
Conector de barras de carga
Conector de energia/comunicação
> Estatística - Consultar a estatística para a sessão atual ou para sessões registradas previamente.
> Apagar o último registro - Deletar o último registro na sessão atual.
> Sessões - Iniciar uma sessão nova ou deletar sessões.
> Ajustes - Modicar os ajustes do indicador e ativar características suplementares.
Observação: Para alterar o idioma, a data e a hora para a sua região role através das opções no sub-menu
Settings (Congurações).
10
Manual Básico Do EziWeigh7
PT
4Instalar o hardware
Veja a seção 5
Monte o braçadeira do indicador em uma superfície
plana (trilhos de madeira, betão) ou em uma tubulação.
Conecte os cabos da barra de carga ao indicador.
Se estiver usando um leitor de painel XRP2, conecte-o
aparelho ao indicador (veja o manual do usuário do
leitor de painel XRP2).
Instale as barras de carga em baixo da
plataforma em uma superfície sólida e plana
(veja o manual do usuário da barra de carga).
5
Estabelecer a ligação a um bastão de leitura de IDE da Tru-Test (caso aplicável)
Para estabelecer uma ligação Bluetooth sem o entre o indicador e o bastão de leitura de IDE será necessário
“parear” os dois dispositivos.
a. Ligue o indicador quando o bastão de leitura estiver dentro do alcance.
b. Pressione o botão Ler para ligar o bastão de leitura.
Após cerca de um minuto, o pareamento estará terminado e a conexão estará
estabelecida. Depois do pareamento, o LED azul do bastão de leitura se acenderá
e uma seta ( ) aparecerá no visor de pesagem do indicador ao lado do símbolo
Bluetooth. Depois de terminar o pareamento, as ligações seguintes se estabelecerão
rapidamente.
c. Use o bastão de leitura para escanear um brinco IDE para testar a conexão.
Observação: Veja o manual do usuário do bastão de leitura IDE para informações mais detalhadas e para resolver falhas.
Otros manuales para EziWeigh7
2
Tabla de contenidos
Idiomas:
Otros manuales de Escala de Tru-Test
