Trocen AWC708C Plus Manual de usuario
AWC708C PLUS Motion
Control
User Manual
Laser Motion Control
RV 1.0
2017.06
www.sztrocen.com
Copyright © 2016 Trocen Automation Tech. Co. Ltd. All Rights Reserved
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
1
Copyright
Shenzhen Trocen Automation Tech. Co. Ltd. (Hereinafter referred as
Trocen) reserves the right to modify the products and product
specifications in this manual without prior notice.
Trocen is not liable for any loss or liability arising directly, indirectly,
specifically, incidental or consequential due to the use of this manual or
this product.
The company has the patent, copyright and other intellectual property
rights of the product and its software. Without authorization, it shall not
directly or indirectly reproduce, manufacture, process, use this product
and its related parts.
Users have the responsibility to pay attention to the design error and
establish protection mechanisms. Trocen doesn’t accept any
responsibility or liability for any damage or loss resulting from
improper operation.
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
2
Contact Us
Shenzhen Trocen Automation Tech. Co. Ltd.
First Floor, Building 4, Zhiheng Industrial Park, Nantou Pass Second Road,
Nanshan District, Shenzhen City, Guangdong Province, China
Tel: +86-0755-27958262
Fax: +86-0755-27447913-608
Email: qiancheng@sztrocen.com
Website: www.sztrocen.com
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
3
Introduction
Thanks for Choosing Trocen Motion Control
In order to feedback customers, we will help you to complete the
production of the equipment with first-class quality motion controller,
perfect after-sales service and efficient technical support.
More Information about Trocen Products
You could get more information about the company and products on our
website www.sztrocen.com , including company profile, product
introduction, technical support and the latest release products, etc.
You could call +86 (0755) 27958262 for more information.
Technical Support & After-Sales Service
You could contact technical support and after-sales service by the
following ways:
Email: qiancheng@sztrocen.com
Tel: +86-0755-27958262
Fax: +86-0755-27447913-608
Address: First Floor, Building 4, Zhiheng Industrial Park, Nantou Pass
Second Road, Nanshan District, Shenzhen City, Guangdong
Province, China
Code: 518100
User Manual
By reading this instruction, the users will know the basic composition,
installation and how to use AWC708C PLUS.
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
4
For Who
This manual is applicable to engineers who have a certain understanding
of laser mechanical automation and electrical circuits.
Main Content
The composition, installation and use of AWC708C PLUS are introduced in
detail
Relevant Document
《LaserCAD User Manual》
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
5
Content
1. Product Introduction............................................................................8
1.1 System Introduction ...................................................................8
1.2 Terms and Explanation ...............................................................9
1.3 Unpack .......................................................................................9
1.4 Panel Preview...........................................................................11
1.5 Buttons.....................................................................................12
1.5.1 Function Keys ................................................................12
1.5.2 Direction Keys................................................................15
1.5.3 Number Keys .................................................................17
1.6 Wiring Board ............................................................................17
1.6.1 Wiring Board Appearance..............................................18
1.6.2 Port Instruction..............................................................19
2. LaserCAD Installation .........................................................................34
3. Simplified Installation.........................................................................35
3.1 Hardware Connection...............................................................35
3.2 Input Test .................................................................................36
3.3 Set the Origin Point of Machine................................................37
3.4 Key Direction ............................................................................38
3.5 Distance Per Pulse....................................................................38
3.6 Hard Limit and Range ...............................................................41
4. Main Interface Preview ......................................................................42
5. Main Page Function Introduction.......................................................45
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
6
5.1 File ...........................................................................................45
5.1.1 Document Params Settings............................................45
5.1.2 Layer Params Settings....................................................47
5.2 Count........................................................................................49
5.3 Working Property.....................................................................51
6. System Menu .....................................................................................53
6.1 U Disk Files...............................................................................53
6.1.1 Work Files......................................................................55
6.1.2 Config Files ....................................................................56
6.1.3 Upgrade Files.................................................................57
6.1.4 Save Current Config to U Disk ........................................58
6.2 Origin Manage..........................................................................58
6.3 Jog Control ...............................................................................60
6.4 Cut Box.....................................................................................61
6.5 Axes Control .............................................................................62
6.6 Motion Parameters Settings.....................................................63
6.7 Common Parameters Settings ..................................................67
6.7.1 Work Mode....................................................................67
6.7.2 Common Parameters.....................................................73
6.7.3 Axis Speed Parameters ..................................................75
6.7.4 Rotate Engraving & Cutting............................................77
6.7.5 CCD Config.....................................................................81
6.8 Network Settings......................................................................82
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
7
6.9 Language..................................................................................84
6.10 System Version.......................................................................84
7. Manufacture Params Settings ............................................................87
7.1 Axis Parameters........................................................................87
7.2 Laser Parameters......................................................................90
7.3 I/O Parameters.........................................................................92
7.4 Auto Reset Settings ..................................................................93
7.5 HardLimit Settings ....................................................................95
7.6 MultiHead Settings...................................................................96
7.7 Function Config ......................................................................102
8. FQA..................................................................................................104
Appendix 1: Wiring Diagram of Servo Driver........................................105
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
8
1. Product Introduction
1.1 System Introduction
AWC708C PLUS is a universal motion controller for laser cutting, laser
engraving and other fields developed by Shenzhen Trocen Automation
Tech co., LTD. This controller featured with single/double-head/three-
head/four-head cutting that can meet the requirement of laser in
low/medium power, is designated for laser cutting/engraving machine,
used for toys and gifts, clothing, acrylic or packaging fields. This system is
used by LaserCAD software and motion controller, which greatly improves
the production efficiency and reduces the production cost.
Features of LaserCAD
⚫User-friendly and versatile.
⚫Support CorelDraw, Auto CAD and other professional drawing
software.
⚫Support the file format: AI, PLT, DXF, SVG, PDF, NC, DST, DSB, UD5,
BMP, GIF, JPG, JPEG, PNG.
⚫Simple graphics drawing function.
⚫Support Z AutoFocus function.
Features of Wiring Board
⚫High DSP, quick calculating and optimal algorithm.
⚫4.3’’ color TFT LCD display with concise operation interface.
AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
9
⚫Optical coupler, anti-electromagnetic interface and system stability.
⚫Faster reading files under USB, U Disk and network.
⚫Support single-head/double-head and multi-head control (the
most is 4 heads) and power controlling stand-alone.
1.2 Terms and Explanation
Table1-2-1 Terms and Explanation
Term
Explanation
LaserCAD Software
LaserCAD is a complementary software with auto typesetting
for laser motion control.
TFT LCD Panel
LCD Panel
Control Panel
Panel (Mainboard)
4.3" color TFT LCD control panel. The panel is used for specific
display and control operations and it is an important part of
the system.
Wiring board
(Baseboard)
The baseboard is the control board of the integrated signal
(input and output) control and the motor drive connection.
Hardware
Includes: mainboard, wiring board, wire and so on.
1.3 Unpack
After receiving the product, please confirm whether the product and
accessories are complete. If there is a lack of accessories, please contact
Otros manuales para AWC708C Plus
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Unidad de control de Trocen
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
