Tripp Lite SmartOnline SU3000RTXR3UHW Guía de instalación

SmartOnline 3kVA On-Line Double-Conversion

UPS, 3U Rack/Tower, 110/120V Hardwire input &

output

MODEL NUMBER: SU3000RTXR3UHW

Description

3000VA / 3kVA online, double-conversion UPS system in 3U rackmount form factor for critical server, network

and telecommunications equipment. 3U rackmount form factor with an installed depth of 29.5 inches (75cm).

Expandable battery runtime with optional BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible) and

BP72V18-2US (multi-pack compatible) external battery packs. Full time sine wave 110 or 120V output with +/-2%

voltage regulation. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output

back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 150V.

Hardwired AC input and output (L-N-G, 120V). Highly efficient operation in optional economy mode setting, saves BTU heat output and energy costs.

Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous

communications via USB port, DB9 serial port and SNMPWEBCARD slot. Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232

enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto

shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions

via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Multi-stage metered current

monitoring and battery charge status LEDs. LED display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge

suppression for dialup, DSL or network ethernet connection. Mains power and voltage regulation LEDs. Audible Alarm. Self-test. Fault-tolerant auto-bypass

mode. 4 post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITHD 2-post rackmount accessories available. Field replaceable, hot

swappable internal batteries and external battery packs. Attractive all-black UPS design. $250,000 Ultimate Lifetime Insurance.

Features

3000VA / 3kVA / 2400 watt online, double-conversion UPS system in 3U rackmount form factor for critical server, network and telecommunications

equipment

True online, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types

Corrects line voltage conditions as low as 65V and as high as 150V back to selectable 110/120V (+/-2%) values

Highlights

3000VA / 3kVA / 2400 watt

on-line double-conversion 3U

rack / tower UPS

110/120V +/-2% output at

50/60Hz, high efficiency

economy mode option

Oversize internal batteries,

Expandable runtime,

Hot-swappable batteries

USB, RS232 & EPO ports;

includes SNMPWEBCARD slot

Front panel status LEDs with

detailed load and battery metering

Hardwire input & output

connections

Package Includes

SU3000RTXR3UHW UPS

System

PowerAlert Software CD and

cabling

Owner's manual with warranty

information

1 / 6

Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs

Internal battery set offers 30 minutes runtime at half load (1200W) and 12 minutes at full load (2400W)

Optional BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible) and BP72V18-2US (multi-pack compatible) external battery packs

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches

Ships with all mounting accessories for 4 post rackmount installation

Optional 2POSTRMKITHD enables 2 post rackmount installation

Optional 2-9USTAND accessory enables small-footprint upright tower placement

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

Network interfaces support simultaneous communications via built-in USB, DB9 serial/contact-closure and SNMPWEBCARD slot

HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number

of additional servers over IP

UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment

and UPS line to battery power voltage setpoints

Built-in Emergency Power Off (EPO) interface with cable

Hardwire 120V AC input/output (L-N-G)

Front panel LEDs offer current monitoring and battery charge level information

Single line TEL/DSL or network ethernet line surge suppression

$250,000 Ultimate Lifetime Insurance

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 3000

Output kVA capacity (kVA) 3

Output Watt Capacity (watts) 2400

Output kW capacity 2.4

Output power factor 0.8

Crest Factor 3:1

Nominal Output Voltage(s)

Supported 110V; 120V

Nominal Voltage details 120V default

Frequency compatibility 50 / 60 Hz

Frequency compatibility details Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start

Output voltage regulation (line mode) +/- 2%

Output voltage regulation (Economy

line mode) +/- 10%

Output voltage regulation (Battery

mode) +/- 2%

2 / 6

Built-in UPS output receptacles Hardwire

Output AC waveform (AC mode) Sine wave

Output AC waveform (battery mode) Pure Sine wave

INPUT

Rated input current (at maximum

load) 24A

Nominal Input Voltage(s) Supported 110V AC; 120V AC

UPS input connection type Hardwire

Recommended Electrical Service 30A 120V (L-N-G)

Phase Single-Phase

BATTERY

Full load runtime (minutes) 12 min. (2400w)

Half load runtime (minutes) 30 min. (1200w)

Expandable battery runtime Supports extended runtime with optional external battery packs

External battery pack compatibility BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible); BP72V18-2US (multi-pack compatible)

DC system voltage (VDC) 72

Battery recharge rate (included

batteries) Less than 6 hours from 10% to 80%

Replacement battery cartridge

(internal UPS battery replacement) RBC96-3U (quantity 2)

Battery Access Front panel battery access door

Battery replacement description Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage regulation description Online, double-conversion power conditioning

Overvoltage correction 2% output voltage regulation during overvoltages to 150

Undervoltage correction 2% output voltage regulation during undervoltages to 80

Severe undervoltage correction 2% output voltage regulation during undervoltages to 65 (under 70% load only)

LEDS ALARMS & SWITCHES

LED Indicators

14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery

and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in

rack/tower formats

Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch

Switches 2 Switches control off/on power status and alarm-cancel/self-test operation

3 / 6

SURGE / NOISE SUPPRESSION

UPS AC suppression joule rating 480

UPS AC suppression response time Instantaneous

UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC noise suppression Yes

PHYSICAL

Installation form factors supported

with optional accessories 2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)

Optional mounting accessory notes Wallmount installation not recommended

Primary form factor Rackmount

UPS / Power Module dimensions in

primary form factor (height x width x

depth / inches)

5.2 x 17.8 x 29.5

UPS / Power Module dimensions in

primary form factor (height x width x

depth / cm)

13.3 x 45.1 x 75

Rack Height 3U

Secondary form factor Tower (requires 2-9USTAND)

UPS / Power Module weight (lbs) 111.3

UPS / Power Module weight (kg) 50.5

UPS Shipping dimensions (height x

width x depth / inches) 11.2 x 31.5 x 23

UPS Shipping dimensions (height x

width x depth / cm) 28.6 x 80 x 58.4

Shipping weight (lbs) 149.9

Shipping weight (kg) 68.1

Cooling method Fan

UPS housing material Steel

ENVIRONMENTAL

Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr. (full load) 1112.7

AC economy mode BTU / hr. (full

load) 520.9

Battery mode BTU / hr. (full load) 1219.3

4 / 6

AC mode efficiency rating (100%

load) 88%

AC economy mode efficiency rating

(100% load) 94%

COMMUNICATIONS

Communications interface USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface

Network monitoring port description Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure

communications.

PowerAlert software Included

Communications cable USB and DB9 cabling included

WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer time No transfer time (0 ms.) in online, double-conversion mode

Low voltage transfer to battery

power (setpoint) 80V (100% load), 65V ( <70% load)

High voltage transfer to battery

power (setpoint) 150

SPECIAL FEATURES

Cold Start (startup in battery mode

during a power failure) Cold-start operation supported

High availability UPS features Automatic inverter bypass; Hot swappable batteries

Green & high efficiency features High efficiency economy mode operation; Schedulable daily hours of economy mode operation

CERTIFICATIONS

UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

WARRANTY

Product Warranty Period (Worldwide) 2-year limited warranty

Connected Equipment Insurance

(U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario