Triplett CamView PTZ 2 Manual de usuario
REV A 10/13
CamView PTZ 2
TM
Instruction Manual
PN: 8001
• Thank you for purchasing the Triplett CamView PTZ 2 CCTV Monitor with
PTZ Controller. Please read the complete manual carefully before using
the product.
• To assure safe use of this product, please read the section on Safety
carefully, and observe any Cautions or Warnings posted there and
throughout this manual.
• Please keep this manual for future reference.
Page 1
Safety Information .......................................................................................................1
Introduction ...................................................................................................................2
Features and Function ............................................................................................2.1
Included Items ...........................................................................................................2.2
Controls and Indicators ..........................................................................................2.3
Connecting and Charging the Battery .............................................................2.4
Using the Camview .....................................................................................................3
General Instructions ................................................................................................3.1
Introduction to Menu and Functions ................................................................3.2
Video Monitor Mode / PTZ Controller Parameter Setting ..........................3.3
Setting PTZ Parameters (Overview) ................................................................3.3.1
Setting PTZ Parameters (Detail) .......................................................................3.3.2
Using Presets ...........................................................................................................3.3.3
Accessing a PTZ Camera Menu .........................................................................3.3.4
Video Setting ...............................................................................................................3.4
Color Bar Generator ..................................................................................................3.5
Cable Testing ...............................................................................................................3.6
Capturing PTZ Protocol ...........................................................................................3.7
Device Setting (User Settings) ..............................................................................3.8
Auto Power O ........................................................................................................3.8.1
Prompt Sound ..........................................................................................................3.8.2
Language ...................................................................................................................3.8.3
Brightness ..................................................................................................................3.8.4
Automatic Address Search...................................................................................3.8.5
Specications ..................................................................................................................4
Table of Contents
Page 2
Page 3
• Use this product in accordance with any prevailing safety rules that
may be imposed by local or federal authorized bodies.
• Do not use this product if it is wet or in conditions where the
humidity exceeds 95%.
• Avoid exposing the product to dusty environments. Do not allow the
product to get wet, and do not immerse it in liquid of any kind.
• During transportation and use, avoid mechanical shock and vibration.
• For greatest safety, do not leave the product unattended while charging.
• Although the product contains automatic circuitry to prevent
overcharging, the battery life (number of charge / discharge cycles)
of the product can be maximized by limiting charge time to 8 hours.
• The product should not be used in the presence of ammable gases.
• Do not disassemble. There are no user serviceable components inside.
• The product should not be used in the presence of strong
electromagnetic elds.
• Don’t touch the product with wet hands. Although the product itself
cannot shock the user, circuits connected to the product
(cameras, switches, controllers, chargers, etc.) may present a
shock hazard under some conditions.
• Do not use strong detergents or solvents to clean the product.
A cloth slightly dampened with water is suggested. If the dirt is
not easy to remove, a mild detergent may be used.
1 Safety Information
Page 4
The Triplett CamView PTZ 2 is a multi-function test tool designed to aid
CCTV and Security electronics installers and maintenance technicians. A
color LCD video monitor allows viewing of security camera images to verify
their operation and setup. The CamView’s keyboard allows control and setup
of the camera’s PTZ (Pan, Tilt, Zoom) functions (if so equipped) via a standard
RS-422, RS-485, or RS-232 interface. A Color Bar Generator provides a stan-
dard test signal to check video cables, video recorders, and video monitors.
The video level and the signal format of an input signal can be measured.
Automatic Address Search is convenient for nding the address of a camera.
LAN cable can also be tested using the CamView’s built-in cable tester.
The rugged yet lightweight construction and ergonomic design maximizes
convenience and portability, and the 12 hour rechargeable Li-ion battery
delivers extended runtime. Its multiple functions, simple operation via on-
screen menus, and reliable performance makes the CamView an ecient
time saving test tool that will enhance any professional tool kit.
2 Introduction
Page 5
• Full Color 3.5” TFT-LCD Video Monitor
• 12V 1A output to power cameras
• OSD (On Screen Display) of all Modes, Functions, and Settings
• Adjustable LCD Brightness / Contrast / Color Saturation
• BNC connectors match professional CCTV equipment
• Full Loop Thru capability or simultaneous View / Gen mode
• Auto NTSC / PAL detection and video display
• PTZ Keyboard allows fast access to Pan, Tilt, Zoom, Focus, and Iris
• Keyboard allows adjustment of Groups, Tours, and Presets
• Supports more than 30 PTZ Protocols including Pelco, Samsung,
Panasonic, and Sony formats
• Supports RS-485, RS-232, & RS-422.
• Baud Rates from 150 to 19.2K
• Data Monitor mode veries presence of PTZ signals
• PTZ Transmit / Receive LEDs
• Color Bar Generator produces NTSC and PAL video formats
• LAN Cable Test identies Opens, Shorts, or Miswires
• Rechargeable Lithium Ion Polymer Battery provides 12 hour work time
• On screen battery life indicator and LED charging indicator
• Operates from battery or AC power pak
• Auto-Power-O extends battery life (can be defeated)
• Carrying case with shoulder strap included
• Neck strap for CamView included
• BNC cable and RS-485 cable included
• Universal AC power pak and charger included
2.1 Features and Function
Page 6
The following items are included with your Triplett CamView PTZ.
2.2 Included Items
Remote Terminator for
LAN Cable Testing
BNC to BNC Patch Cable
AC Power Pak
Audio Input Cable
12V/1A DC Output
Cable
PTZ Cable
Page 7
2.2 Included Items Cont.
Carrying Case
Shoulder Strap for Carrying Case
Neck Strap for CamView
Instruction Manual
Page 8
2.3 Controls and Indicators
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
16
17
18
19
20
Tabla de contenidos
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario