TriangleTube SENSA SN01A Manual de usuario

USER MANUAL

ENGLISH

UNPACKING

Open the box, and take out the speakers and accessories. If you notice any defects in one of the

elements as you unpack, please get in touch with your reseller.

Before disposing of the packaging, make sure there is nothing left inside. Each box contains :

Î1 x active SENSA speaker

Î1 x passive SENSA speaker

Î1 x remote (pull out the plastic tab from the battery compartment before use)

Î8 x adhesive anti-slip feet to place below the speakers

Î1 x AC power cord

Î1 x 3 meters speaker cable to link the speakers

Î1 x RCA cable to connect your sources

Î1 x 1/8-inch (3.5mm) jack cable to connect your sources

INSTALLATION PRECAUTIONS

Before the installation

Before making any connections, turn off the devices. Be sure to always set the active speaker switch

to OFF before removing or plugging connection cables. Do not plug in the power cord before all

connections are made.

Moving the device

Always remove the power cord and disconnect the cables between all components when moving

the device. This will prevent a short-circuit or the damage to the plugs or connection cables.

Before turning on the device

Check one last time if all the connections are correct.

Location to avoid

Install your speakers in a temperate place and avoid humid locations or direct sunlight.

Recycling

Protection of the environment: Your products contain valuable materials which can be recovered or

recycled. Take them to the appropriate collection points.

POWERING

To protect the bottom of your speakers, we recommend using the rubber feet provided. They also

make it possible touncouple the speakers, thus reducing the transmission of vibrations.

Connecting the speakers

The SENSA speakers must be interconnected with the 3 meters speaker cable provided (black

cable mentioning “High performance OFC cable”).

Ensure that the speaker connection polarity is correct: the red and black terminals on the passive

and active speakers must be connected respectively to one another. To aid with the setup, the

connection cable includes a colour-coding system, the colour blue is dedicated to the red terminal

(+) and the colour brown to the black terminal (-).

Powering on

Once you have checked the amplier on the active speaker is set to the “OFF” position, plug the

power cord into the designated input and into an AC power outlet. The speakers are then ready for

use and can be turned on.

123

PAIR

INPUT LED:

BLUE - BLUETOOTH

GREEN - RCA OR PHONO

WHITE - AUX

PURPLE - OPTICAL

DESCRIPTION OF THE SPEAKER

1. RCA / Phono selection

2. Power LED

(blue if activated / red in standby)

3. Auxiliary 1 input (RCA)

4. Auxiliary 2 input (1/8-inch (3.5mm) Jack)

5. Phono ground terminal

6. Terminal of the passive speaker

7. Power switch

8. AC outlet

9. Optic input

10. RCA output

11. Input selection button

12. Volume control button

13. Bluetooth pairing button

14. LED indicating the source as follows :

Blue : BLUETOOTH

Green : RCA or PHONO

White : AUX

Purple : OPTIQUE

PAIR

INPUT LED:

BLUE - BLUETOOTH

GREEN - RCA OR PHONO

WHITE - AUX

PURPLE - OPTICAL

DESCRIPTION OF THE REMOTE

1. Power on/Standby

2. Increasing/decreasing the volume

3. Skip forward/backward

(Bluetooth mode only)

4. Resetting the bass/treble adjustments

5. Treble adjustment

6. Bass adjustment

7. Source selection

8. Play/pause a track

(Bluetooth mode only)

9. Mute

When using the remote, always direct it towards the receiver on the front of the main speaker. The

LED on the front panel blinks when the remote is being used.

CONNECTING SOURCES

The SENSA speakers can be paired with a variety of sources. Here are the various options :

Connection via Bluetooth

SENSA lets you play music from any Bluetooth-enabled sources: smartphone, tablet, computer...

To do so :

ÎSlide the power switch on the back to the ON position to activate your SENSA speakers.

ÎSelect the “Bluetooth” input using the remote or the “INPUT” button on the back of the speaker.

The blue LED indicates that the source is connected via “Bluetooth”.

ÎWhen selecting the source, the LED is blinking blue indicating that the system is seeking to

connect to a Bluetooth-enabled device (smartphone, tablet...).

ÎWhen you search on your Bluetooth device (refer to the owner’s guide if needed), the SENSA

speakers should appear under the name "SENSA SN01A" or "SENSA SN03A", you can then

connect to them. Your speakers are now linked to your device and will reproduce the sound from

the device. The connection will be done automatically next time you switch on your speakers if

Bluetooth is selected and enabled on your device.

ÎIf you wish to connect another device while the previous one is still connected, press and hold

the “PAIRING” button on back of the speaker for 2 seconds. The previously paired-device will

automatically be disconnected and the seeking mode (blinks of the blue LED) of the speaker

activated. Repeat the previous step to connect your new device.

ÎSENSA’s Bluetooth interaction allows you to change track, play and pause directly from your

remote, without using the connected device.

ÎYour Bluetooth device now controls your speakers and you can change the volume directly from

this device.

Connection via an RCA cable

An RCA cable (included) enables you to connect your SENSA speakers to your television, CD player

or other devices. To do so :

ÎPlug the red and white connectors into “RCA INPUT” on the back of the SENSA speaker,

following the colours and do the same on the source.

ÎSelect the “RCA” input using the remote or the “INPUT” button on the back of the active

speaker. The green LED indicates that the source is connected to the “RCA” input. Your system

is ready to operate.

Connection via an RCA cable for turntables

An RCA cable (not included) enables you to connect your SENSA speakers to your turntable. To

do so :

ÎPlug the red and white connectors into “RCA INPUT” on the back of the SENSA speaker,

following the colours and do the same on the source.

ÎAttach the ground cable connector to the designated terminal on the amplier.

ÎSelect the “RCA” input using the remote or the “INPUT” button on the back of the active

speaker. The green LED indicates that the source is connected to the “RCA” input. Your system

is ready to operate.

Connection via a 1/8-inch (3.5mm) jack cable

A 1/8-inch (3.5mm) jack cable (included) enables you to connect your SENSA speakers to many

devices: smartphone, audio player, tablet, computer, television... To do so :

ÎPlug one end of the jack connector into the “AUX INPUT” terminal and the opposite end into

your device.

ÎSelect the “AUX” input using the remote or the “INPUT” button on the back of the active

speaker. The white LED indicates that the source is connected to the “AUX” input. Your system

is ready to operate.

Connection via an optical cable :

The optical input enables you to connect your SENSA speakers to any audio devices with an optical

output: audio player, DVD player, television... To do so:

ÎPlug one end of the optical cable into the back of the SENSA active speaker in the “OPT INPUT”

and the opposite end into your device.

ÎSelect the “OPTICAL” input using the remote or the “INPUT” button on the back of the active

speaker. The purple LED indicates that the source is connected to the “OPTICAL” input. Your

system is ready to operate.

CONNECTING AMPLIFIED DEVICES

Connecting amplied external devices such a subwoofer

Your SENSA speakers can be paired with a subwoofer or an additional pair of SENSA speakers.

To do so, follow the designated colours to connect an RCA cable to the RCA OUTPUT and to your

second system (please refer to the user manual of the second device), you can then use a subwoofer

or connect an additional pair of amplied speakers.

The signal will then be delivered to the second system. The level will be adjusted on the main

speaker.

For the subwoofer, depending on the type of connections, you can use a Y split RCA cable.

BASS AND TREBLE ADJUSTMENT

Your SENSA speakers have a band equalizer that enables you to adjust the low and high frequencies

as you like.

Adjusting the amount of bass:

6 positions available in 2dB steps over a range between 30 and 400Hz.

(-6dB, -4dB, -2dB, 0dB, +2dB, +4dB, +6dB).

The factory setting defaults to 0dB.

The low-frequency output will increase or decrease each time the remote control is pressed.

Adjusting the amount of treble:

6 positions available in 2dB steps over a range between 2 and 30KHz.

(-6dB, -4dB, -2dB, 0dB, +2dB, +4dB, +6dB).

The factory setting defaults to 0dB.

The high-frequency output will increase or decrease each time the remote control is pressed.

When the speaker goes on standby, the settings will be stored for the next use.

To restore the factory presets, you just need to press the “RESET” button on the remote.

AUTO STANDBY FEATURE

If no signal is received for 15 minutes, the speakers will automatically switch to standby. To exit the

standby mode, simply switch the speakers back on with the remote.

HOW THE LED ON THE FRONT PANEL WORKS

The LED on the front panel switches off automatically after 10 seconds to avoid visual discomfort

while using the product.

Pressing on a button on the remote will turn the LED back on for 10 seconds.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Oradores de TriangleTube

TriangleTube

TriangleTube MAGELLAN 40TH Manual de usuario

TriangleTube

TriangleTube SECRET Suplemento

TriangleTube

TriangleTube SENSA Series Manual de usuario

TriangleTube

TriangleTube ELARA LN01A Suplemento

TriangleTube

TriangleTube GAMME Odyssey Manual de usuario

TriangleTube

TriangleTube BOREA BRA1 Manual de usuario

TriangleTube

TriangleTube MAGELLAN GRAND CONCERT Suplemento

TriangleTube

TriangleTube BOREA BR02BT Suplemento

TriangleTube

TriangleTube GALAXY 2 Manual de usuario

TriangleTube

TriangleTube BR10 Suplemento

TriangleTube

TriangleTube AIO Suplemento

TriangleTube

TriangleTube AIO3 Manual de usuario

TriangleTube

TriangleTube S01 Manual de usuario

TriangleTube

TriangleTube ELARA LN02 Suplemento

TriangleTube

TriangleTube 40th anniversary COMETE Guía

TriangleTube

TriangleTube ESPRIT EX Manual de usuario

TriangleTube

TriangleTube EXT7 Suplemento

TriangleTube

TriangleTube SECRET ICT4 Suplemento

TriangleTube

TriangleTube VOCE Manual de usuario

TriangleTube

TriangleTube 902 series Manual de usuario

TriangleTube

TriangleTube Zerius 902 Manual de usuario

TriangleTube

TriangleTube SIGNATURE ALPHA Suplemento

TriangleTube

TriangleTube SECRET EXT Manual de usuario

TriangleTube

TriangleTube BOREA CONNECT Suplemento

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario