Pag. 3DUALCOM-8 INSTALLATION MANUAL
ENGLISH
Description
TRE I SYSTEMS thanks you for having selected the new concept dual communication control
panel for the protection of your home, business and belongings. The DUALCOM-8 offers the end
user the most modern data transmission technology present in today's market. With the installation
of this new concept control panel, it is possible in real time to request and send all information col-
lected, to remote telephone numbers. The control panel also offers the end user the features of two
separate areas of protection, remote arm and disarm and home automation with possibility of weekly
management. All information is transmitted on either the PSTN or GSM network or if desired both.
Though remote SMS message commands or by PSTN telephone commands, the HA-3, optional
home automation module, allows you to set, arm or disarm of any home appliance.
This panel is also compatible with the standard alarm receive station that functions with ADEMCO
4+2 and CONTACT ID protocol transmission.
The standard DUALCOM-8 control panel is manufactured with 8 programmable burglary alarm hard-
wire zones and 3 additional hardwired zone for Hold-up, Medical Distress, Fire and Tamper alarm
triggers. Through an optional EZ-8 expansions module (maximum 2 for each panel) the programma-
ble hardwire zones may be increased to maximum 24. Eight standard, plus 8 for each EZ-3 module.
In addition the standard DUALCOM-8 has on-board an additional 48 wireless zones compatible with
the “PEGASO” transmission protocol.
With the DUALCOM-8 all zones may be grouped into two AREAS of protection and programmable
with access on 6 levels of security using up to 8 different operators offering a form of higher and
more intelligent level of installation security. Each operator will be assigned a personalized access
code, keychain transmitter PEG-3, and electronic key SK-8 (see section C on Page 63).
KP-8R, the DUALCOM-8 remote keypad, has incorporated a new generation TRANSCEIVER GW
TRANSK 1120 ®module compatible with “PEGASO” transmission protocol which guarantees the
maximum transmission range between the control panel, wireless trigger sensors and the wireless
sirens TLM-18 VRP, TLM-21 VRP and TLM-7 SOLARIS.
General Characteristics:
• Areas: Maximum 2 with assigned sensors for each area.
• Hardwire zones: Minimum 8 (expandable to maximum 24 with the expansion module EZ-8)
• Wireless zones: 48 (compatible with the “PEGASO” protocol)
• Service zones: 3 (Hold-up, Medical Distress and Fire) plus 1 zone for Tamper.
• Supports hardwire sirens: ELIMINATOR-12, TLM-13F, TLM-30F, TLM-18, SB-2, TLM-39
• Supports wireless sirens: TLM-18 VRP, TLM-21VRP , TLM-7 SOLARIS (PEGASO protocol)
• Supports keypads: KP-8R and KP-8 (Maximum of 8 for each installation)
• Telephone dialler: One PSTN + One GSM with QUECTEL M10®
• Communication Protocol: standard, ADMECO 4+2 and CONTACT ID
• Weekly management features:
∗ Automatic arm disarm:
→ Programming in DAY mode - one for each Area of protection.
→ Programming in NIGHT mode - one for each Area of protection
Home automation Arm/Disarm through optional module HA-3
→ OUTPUT 1: Can be armed or disarmed 3 times each day.
→ OUTPUT 2: Can be armed or disarmed 3 times each day.
→ OUTPUT 3: Can be armed or disarmed 3 times each day.
• Event memory capacity:
∗ Access to control panel (40 events)
∗ Alarm memory (50 events)
∗ Fault memory (50 events)
