Transmitter Solutions BC-2010 Manual de usuario

Model BC-2010 HID&EM

Keypad/Reader/Controller

User Manual

1. Packing List

Name Quantity Remarks

Digital Keypad-BC-2010 1

User manual 1

Screw driver 1

Rubber bungs 4 6*27mm, used for fixing

Self tapping screws 4 3.5*27mm, used for fixing

Please ensure that all the above contents are correct. If any are missing please notify the

supplier of the BC-2010.

2. BC-2010 Quick Reference Programming Guide

To enter the programming mode * Master code #

888888 is the default factory master code

To exit from the programming mode *

Note that to undertake the following programming the master user must be logged in

To change the master code 0 New code # New code #

The master code can be 6 to 8 digits long

To add a PIN user.

1 User ID number # PIN #

The ID number is any number between 1 & 1500. The

PIN is any four digits between 0000 & 9999 with the

exception of 1234 which is reserved. Users can be added

continuously without exiting programming mode

To add a card user 1 Read Card #

Cards can be added continuously without exiting

programming mode

To delete a PIN or a card user. 2 User ID number # for a PIN user or

2 Read Card or Card ID number # for a card user

Users can be deleted continuously without exiting

programming mode

To unlock the door for a PIN user Enter the PIN then press #

To unlock the door for a card user Present the card

3. Description

The BC-2010 is single door multifunction standalone access controller or a Wiegand

output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh

environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated

case which is available in either a bright silver or matt silver finish. The BC-2010 supports

up to 1500 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card

reader supports both HID and EM 125KHZ frequency cards. The BC-2010 has many

extra features including lock output current short circuit protection, a Wiegand input and

output interface, and a backlit keypad. These features make the BC-2010 an ideal choice

for door access not only for small shops and domestic households but also for

commercial and industrial applications such as factories, warehouses, laboratories, banks

and prisons.

4. Features

zStrong Zinc Alloy Electroplated anti-vandal case

zFull programming from the keypad

z1500 uses, supports Card, PIN, Card + PIN

zCan be used as a stand alone keypad

zSupport both 125KHZ HID card, 125KHZ EM card

zCard Block enrollment, can enroll 1500cards within 25 seconds

zBacklight keys

zWiegand 26 input for the connection of an external reader

zExternal readers can be any make of card reader with a 26 bit output, i.e. HID, Mifare，

EM and so on

zWiegand 26 output for connection to a controller

zDual BC-2010 units can interconnected

zOne Relay output, NO, NC, COM

zAdjustable Door Output time, Alarm time, Door Open time

zCan delete card by 8 digit card number without present the card

zVery low power consumption (20Ma)

zFast operating speed, <20ms with 1500 users

zLock output current short circuit protection

zEasy to install and program

zBuilt in light dependent resistor (LDR) for anti tamper

zBuilt in buzzer

zRed, Yellow and Green LEDS display the working status

zFive year warranty

5. Specifications

Operating Voltage 12V DC

User Capacity 1500

Keypad 12 keys, 3x 4 digits

Card Type HID 125 KHZ card; EM 125KHZ card

Card Reading Distance 3 -7 cm

Active Current ＜80mA

Idle Current ＜50mA

Lock Output Load Max 3A

Alarm Output Load Max 20A

Operating Temperature -20～60℃

Operating Humidity 5%- 95% RH

Adjustable Door Relay time 0 -99 seconds

AdjustableAlarm Time 0- 3 minutes

Wiegand Interface Wiegand 26 bit

Wiring Connections Electric Lock, Exit Button, DOTL, ExternalAlarm

Dimensions L128 x W82 x H28 mm

Net Weight 500 g

Gross Weight 700 g

6. Installation

zRemove the back cover from the keypad using the supplied security screwdriver

zDrill 4 holes on the wall for the screws and I hole for the cable

zFix the back cover firmly on the wall with 4 flat head screws

zThread the cable through the cable hole

zUse the supplied rubber bungs to waterproof the screw holes

zApply waterproof compound around the cable entry hole

zAttach the keypad to the back cover.

7. Wiring

Colour Function Description

Green D0 Wiegand Output D0 (or input from an external reader)

White D1 Wiegand Output D1 (or input from an external reader)

Grey Alarm - Alarm Negative

Yellow OPEN Request to Exit Button

Brown D-In Door Contact

Red 12V + 12V + DC Regulated Power Input

Black GND 0V DC Regulated Power Input

Blue NO Relay output NO

Purple COM Relay output COM

Orange NC Relay output NC

Connection Diagram

Notes: BC-2010 uses a standard 10 pin connector- J1.The diagrams above show the standard

cable colour connections for wiring BC-2010 keypad to a lock when used in a standalone

mode. The upper diagram shows a common power supply for both the keypad and lock, the

under diagram shows a special power supplier for both the keypad and lock.

NO and COM: Fail-secure lock, when power on, the lock is opened.

NC and COM: Fail-safe lock, when power off, the lock is opened.

8. To Reset to Factory Default

To reset to factory default, power off the device, remove the keypad from the back cover, press

the RESET key(K2) on the PCB, hold it and power on, keeping pressing it until hear three

beeps, means reset to factory default successfully.

Note: Reset to factory default, the user’s information is still retained.

9. Anti Tamper Alarm

The BC-2010 is built-in tamper switch. If the keypad is removed from the cover then the

tamper alarm will operate.

10. Sound and Light indication

Operation Status Red Light Green Light Yellow Light Buzzer

Power on - Bright - Short Ring

Stand by Bright - - -

Press keypad - - - Short Ring

Operation successful - Bright - Short Ring

Operation failed - - - 3 Short Rings

Enter into programming mode Bright - - Short Ring

In the programming mode - - Bright -

Exit from the programming

mode Bright - - Short Ring

Open the door - Bright - Short Ring

Alarm Bright - - Alarm

11. BC-2010 Detailed Programming Guide

11.1 User Settings

To enter the programming mode * Master code #

888888 is the default factory master code

To exit from the programming mode *

(Before exit from the programming mode, press # is to

confirm the operation step.)

Note that to undertake the following programming the master user must be logged in

To change the master code 0 New code # New code #

The master code can be 6 to 8 digits long

Setting the working mode:

Set valid card only users

Set valid card and PIN users

Set valid card or PIN users

3 0 # Entry is by card only

3 1 # Entry is by card and PIN together

3 2 # Entry is by either card or PIN (default)

To add a user in either card or PIN mode, i.e. in the 3 2 # mode. (Default setting)

To add a Pin user 1 User ID number # PIN #

The ID number is any number between 1 & 1500. The

PIN is any four digits between 0000 & 9999 with the

exception of 1234 which is reserved. Users can be added

continuously without exiting programming mode as

follows:

1 User ID no 1 # PIN # User ID no 2 # PIN #

To delete a PIN user 2 User ID number #

Users can be deleted continuously without exiting

programming mode

To change the PIN of a PIN user

(This step must be done out of

programming mode)

* ID number # Old PIN # New PIN # New PIN #

To add a card user (Method 1)

This is an easy way to enter the individual

cards using ID number auto generation.

1 Read Card #

Cards can be added continuously without exiting

programming mode

To add a card user (Method 2)

This is the alternative way to enter the

individual card using User ID Allocation.

In this method a User ID is allocated to a

card. Only one user ID can be allocated

to a single card.

1 ID number # Card #

To add a series cards users – Block

Enrollment

5 ID number # 8 digits Card number # Card

quantity #

Card quantity is between 1-1500. Of the 8 digits card

number, for HID card, they are the 3 digits of a facility

code and 5 digits of a serial number; for EM card, they

are the last 8 digits on the card.

To delete a card user by card. Note users

can be deleted continuously without

exiting programming mode

2 Read Card #

To delete a card user by user ID. This

option can be used when a user has lost

their card

2 User ID #

To delete a card by card number(8 digits) 8 Input 8 digits Card number #

Cards can be deleted continuously without exiting

programming mode

To add a card and PIN user in card and PIN mode (3 1 # )

To Add a card and Pin user

(The PIN is any four digits between 0000

& 9999 with the exception of 1234 which

is reserved.)

Add the card as for a card user

Press *to exit from the programming mode

Then allocate the card a PIN as follows:

* Read card 1234 # PIN # PIN #

To change a PIN in card and PIN mode

(Method 1) Note that this is done outside

programming mode so the user can

undertake this themselves

* Read Card Old PIN # New PIN # New PIN #

To change a PIN in card and PIN mode

(Method 2) Note that this is done outside

programming mode so the user can

undertake this themselves

* ID number # Old PIN # New PIN # New PIN #

To delete a Card and PIN user just delete

the card 2 User ID #

To add a card user in card mode (3 0 # )

To Add and Delete a card user The operating is the same as adding and deleting a card

user in 3 2 #

To delete All users

To delete ALL users. Note that this is a

dangerous option so use with care 2 0000 #

To unlock the door

For a PIN user Enter the PIN then press #

For a card User Read card

For a card and PIN user Read card then enter PIN #

11.2 Door Settings

Relay Output Delay Time

To set door relay strike time 4 0～99 # *

0-99 is to set the door relay time 0-99 seconds

Door Open Detection

Door Open Too Long (DOTL) warning. When used with an optional magnetic contact or built-in

magnetic contact of the lock, if the door is opened normally, but not closed after 1 minute, the inside

buzzer will beep automatically to remind people to close the door and continue for 1 minute before

switching off automatically.

Door Forced Open warning. When used with an optional magnetic contact or built-in magnetic contact

of the lock, if the door is forced open, or if the door is opened after 20 seconds of the

electro-mechanical lock not closed properly, the inside buzzer and alarm output will both operate. The

Alarm Output time is adjustable between 0-3 minutes with the default being 1 minute.

To disable door open detection. (Factory

default) 6 0 #

To enable door open detection 6 1 #

Alarm output time

To set the alarm output time (0-3 minutes)

Factory default is 1 minute 9 0～3 #

Keypad Lockout & Alarm Output options. If there are 10 invalid cards or 10 incorrect PIN numbers

in a 10 minute period either the keypad will lockout for 10 minutes or the alarm will operate for 10

minutes, depending on the option selected below.

Normal status: No keypad lockout or

alarm (factory default) 7 0 # (Factory default setting)

Keypad Lockout 7 1 #

Alarm Output 7 2 #

To remove the alarm

To reset the Door Forced Open warning Read valid card or Master Code #

To reset the Door Open Too Long warning Close the door or Read valid card or Master Code #

12. Interconnecting Two Devices

12.1 BC-2010 operating as a Wiegand Output Reader

In this mode the BC-2010 supports a Wiegand 26 bit output so the Wiegand data lines can be

connected to any controller which supports a Wiegand 26 bit input. See figure 1.

Figure 1

12.2 BC-2010 operating as a Controller

In this mode the BC-2010 supports a Wiegand 26 bit input so an external Wiegand device

with a 26 bit output can be connected to the Wiegand input terminals on the BC-2010. Either

an ID card reader (125 KHZ) or an IC card reader (13.56MHZ) can be connected to the

BC-2010. Cards are required to be added at the external reader, except where an external

EM reader is used, in this case cards can be added at either reader. See figure 2.

Figure 2

Tabla de contenidos

Otros manuales de Teclado de Transmitter Solutions

Transmitter Solutions

Transmitter Solutions Dolphin DOLXP1KB Manual de usuario

Transmitter Solutions

Transmitter Solutions DOL1000-MF Manual de usuario

Transmitter Solutions

Transmitter Solutions Dolphin DOLXFD1000B-M Manual de usuario

Transmitter Solutions

Transmitter Solutions Dolphin DOLKWP318LIPSQ Manual del propietario

Transmitter Solutions

Transmitter Solutions DOLKSS1KB Manual de usuario

Manuales populares de Teclado de otras marcas

BFT

BFT SELETTO Manual de usuario

Micro Id

Micro Id MP7G3BL Manual de instrucciones

WindowMaster

WindowMaster WLI 130 Manual de usuario

ACT

ACT ACT PRO 1030 Manual de usuario

Cardin

Cardin SSB Series Manual de usuario

Harman Kardon

Harman Kardon KP 1 Manual de usuario

Chamberlain

Chamberlain KPR2000 Guía del usuario

CYP

CYP CR-KP1 Manual de usuario

Aeware

Aeware k-35 Series Guía de referencia

Aritech

Aritech CS-175 Series Manual de usuario

GE NetworX NX-1600E Series Manual de usuario

Lenze AC Tech

Lenze AC Tech MC SERIES Manual de usuario

Burg Wächter

Burg Wächter secuENTRY 7711 Manual de usuario

Aeware

Aeware in.k450 Manual de usuario

Lenze

Lenze EPM-H410 Manual de usuario

Toshiba

Toshiba RKP007Z Manual de usuario

Gemini

Gemini GEM-DXK1 KEYPAD Manual de usuario

Russound

Russound MDK-C5 Manual de funcionamiento