Transition Networks S8TB Manual de usuario

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 1of 9

S8TB

8-Port 10/100/1000BASE-T

Compact Switch

User Guide

33672 Rev. A

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 2of 9

Regulatory Approvals

•FCC Class B

•CE

•EN55022 Class B

Canadian EMI Notice

This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du

Canada.

European Notice

Products with the CE Marking comply with both the EMC Directive (2004/108/EC) and the Low Voltage Directive

(2006/95/EC) issued by the Commission of the European Community Compliance with these directives imply

conformity to the following European Norms:

EN55022 (CISPR 22) - Radio Frequency Interference

EN60950 (IEC950) - Product Safety

S8TB - 8-Port 10/100/1000BASE-T Compact Switch User Guide, PN 33672 Rev. A

Record of Revisions

Rev.

Date

Description

12/14/15

Initial release.

To Contact Transition Networks

For prompt response when calling for service information, please have the following information ready:

Product serial number and revision

Date of purchase

Vendor or place of purchase

You can reach Transition Networks technical support via E-mail at techsupport@transition.com

Transition Networks

10900 Red Circle Drive

Minnetonka, MN 55344

United States of America

Telephone: +1.800.526.9267

Fax: +1.952.941.2322

http://www.transition.com

info@ Transition.com

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 3of 9

Contents

Regulatory Approvals ..............................................................................................................................................2

Record of Revisions.................................................................................................................................................2

1. Introduction...........................................................................................................................................................4

Features..................................................................................................................................................................4

Package Contents...................................................................................................................................................4

Ethernet Switching Technology...............................................................................................................................5

2. Hardware Description...........................................................................................................................................6

Physical Dimensions...............................................................................................................................................6

LED Indicators.........................................................................................................................................................6

LED Indicator Descriptions..................................................................................................................................6

Power On ................................................................................................................................................................6

3. Troubleshooting....................................................................................................................................................7

Incorrect connections..............................................................................................................................................7

Diagnosing LED Indicators .....................................................................................................................................7

4. Technical Specifications......................................................................................................................................8

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 4of 9

1. Introduction

The S8TB is a compact 8-port 10/100/1000Base-T Ethernet switch that can be used to build high-performance

switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed

networking. The S8TB is targeted at workgroup, department or backbone computing environment at SME (small,

medium enterprise) business.

The S8TB features a “store-and-forward“ switching scheme which allows the switch to auto-learn and store

source address on the 8K-entry MAC address table.

Features

•Conforms to IEEE 802.3, 802.3u. 802.3ab, 802.3az, and 802.3x

•8 10/100/1000 Base-T RJ-45 Ethernet ports

•Auto-MDIX on all ports

•N-Way Auto-Negotiation supported

•Store-and-Forward switching architecture

•Non-blocking full wire speed

•Backplane Bandwidth 16 Gbps

•Embedded 128k bytes memory buffer

•8K MAC address table

•Up to 9K byte Jumbo Frame

Package Contents

Unpack the contents of the S8TB packaging and verify them to the checklist below.

•One S8TB Switch

•One Documentation Post card

•Four Rubber Feet

•Four Sponges

•One Wall Mount Kit (two brackets)

Compare the contents of your S8TB package with the standard checklist above. If any item is missing or

damaged, please contact your local dealer for service. Save the packaging materials for possible future use.

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 5of 9

Ethernet Switching Technology

Ethernet Switching Technology dramatically boosted the total bandwidth of a network, eliminated congestion

problems inherent in Carrier Sense Multiple Access with Collision Detection (CSMA/CD) protocol, and greatly

reduced unnecessary transmissions.

With this revolutionized networking, the system is capable of: First, allows two-way, simultaneous transmissions

over the same port (Full-duplex) to essentially double the bandwidth. Second, reduces the collision domain to a

single switch-port to eliminate the need for carrier sensing. Third, uses the store-and-forward technology’s

approach of inspecting each packet to intercept corrupt or redundant data, and eliminates unnecessary

transmission that slows the network. In addition, the system employs address learning to replace the inefficient

method of constant broadcasting to every node in search of the correct receiving port.

Auto-negotiation regulates the speed and duplex of each port, based on the capability of both devices. Flow-

control allows transmission from a 100Mbps node to a 10Mbps node without loss of data. Auto-negotiation

and flow-control may require disablement for some networking operations involves legacy equipment. Disabling

the auto-negotiation is accomplished by fixing the speed or duplex of a port.

Ethernet Switching Technology supplied higher performance at costs lower than other solutions. Wider bandwidth,

no congestion, and the reduction in traffic are reasons why the Ethernet Switch is replacing expensive routers and

inefficient hubs as the ultimate networking solution. Switching brought a whole new way of thinking to networking.

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 6of 9

2. Hardware Description

This section mainly describes the hardware of the 8-port 10/100/1000Base-T Switch, and gives a physical and

functional overview of the Switch.

Physical Dimensions

The physical dimension of the 8-port 10/100/1000Base-T Switch is 165mm x 32.5mm x 100 mm (W x H x D).

LED Indicators

The LED Indicators gives real-time information of systematic operation status. The following table provides

descriptions of LEDs status and their meaning.

LED Panel

LED Indicator Descriptions

LED Status Description

Steady Green Port connection on 1000Mbps

LK/ACT Steady Amber Port connection on 10/100Mbps

Off Port disconnect

Power On

Connect the power cord to the power socket on the rear panel of the Switch.

Connect the other side of power cord to the power outlet.

The power rating of the switch is AC voltage ranging from 100-240VAC, frequency 50~60Hz.

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 7of 9

3. Troubleshooting

This section is intended to help you solve the most common problems on the S8TB switch.

Incorrect Connections

•Faulty or loose cables

Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections are snug.

If that does not correct the problem, try a different cable.

•Non-standard cables

Non-standard and mis-wired cables may cause numerous network collisions and other network problem, and can

seriously impair network performance. A category 5-cable tester is a recommended tool for every 100Base-TX

network installation.

RJ-45 ports: Use unshielded twisted-pair (UTP) or shield twisted-pair (STP) cable for RJ-45 connections: 100Ω

Category 3, 4 or 5 cable for 10Mbps connections or 100Ω Category 5 cable for 100Mbps connections.

Also be sure that the length of any twisted-pair connection does not exceed 100 meters (328 feet).

•Improper Network Topologies

It is important to make sure that you have a valid network topology. Common topology faults include excessive

cable length and too many repeaters (hubs) between end nodes. In addition, you should make sure that your

network topology contains no data path loops. Between any two end nodes, there should be only one active

cabling path at any time. Data path loops will cause broadcast storms that will severely impact your network

performance.

Diagnosing LED Indicators

The switch can be easily monitored through panel indicators, which describe common problems you may

encounter, to assist in identifying problems and where you can find possible solutions.

See the section “LED Indicators” on page 6above.

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 8of 9

4. Technical Specifications

This section provides the specifications of the S8TB switch, and the following table lists these specifications.

Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE802.3x Duplex Flow Control

IEEE802.3az EEE

Protocol

CSMA/CD

Technology

Store and Forward switching architecture

Cable Connections

RJ-45 (10BASE-T): Category 3,4,5 UTP/STP

RJ-45 (100BASE-TX): Category 5 UTP/STP

RJ-45 (1000BASE-T): Category 5,5e or enhanced UTP/STP

Network Rate

10/100/1000 Mbps Auto-negotiation

Jumbo Frames

9K Bytes

MAC Address Table

8K-entry

Memory Buffer

128K bytes

LED Indicators

Per port: Link/Activity

Backplane

16Gbps

Case

Metal

Operating Temp.

0 deg. C to 40 deg. C (32 deg. F to 104 deg. F)

Operating Humidity

10% to 90% (Non-condensing)

Storage Temp.

-40 deg. C to +70 deg. C (-40 deg. F to +158 deg. F)

Power Supply

100-240 VAC, 50~60Hz

Power Consumption

3.5 Watts max.

Dimensions

165mm x 32.5mm x 100 mm (W x H x D)

EMI

FCC Class B, CE

Safety

LVD

Warranty

Limited Lifetime Warranty

Transition Networks S8TB User Guide

33672 Rev. A www.transition.com Page 9of 9

Transition Networks

10900 Red Circle Drive

Minnetonka, MN 55344

United States of America

Telephone: +1.800.526.9267

Fax: +1.952.941.2322

http://www.transition.com

info@ Transition.com

S8TB - 8-Port 10/100/1000BASE-T Compact Switch User Guide, PN 33672 Rev. A

Tabla de contenidos

Otros manuales de Enrutador de red de Transition Networks

Transition Networks

Transition Networks S8TXA Manual de usuario

Transition Networks

Transition Networks MIL-SW8T1GPA Manual de usuario

Transition Networks

Transition Networks S4224 Manual de usuario

Transition Networks

Transition Networks SISGM1040-162D Manual de usuario

Transition Networks

Transition Networks SISGM1040-244 Manual de usuario

Transition Networks

Transition Networks SISPM1040-3248-L Manual de usuario

Transition Networks

Transition Networks SISPM1040-182D Manual de usuario

Transition Networks

Transition Networks SRA-RAD-01 Manual de usuario

Transition Networks

Transition Networks SIBTF10XX-1XX-MR Manual de usuario

Transition Networks

Transition Networks SISPM1040-3248-L Manual de usuario

Transition Networks

Transition Networks SISTF10XX-140-LR(T) Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad