Trans instruments ELECTROLYZER Manual de usuario

4,1,4,1,2,3,2,3

OPERATION MANUAL

ELECTROLYZER 2i

A powerful tool to demonstrate

purity

of Reverse Osmosis water

TRODUCTION

The ELECTROLYZER is specially designed as a

powerful visual demonstration tool to compare R.O.

purified water and untreated water through the

precipitation of solid*, making it the easiest way to

explain the unseen dissolved solid in portable water.

(Note: *Test results do not suggest that untreated water were

unsafe for consumption)

IMPORTANT:

READ WARNING INSTRUCTIONS

BEFORE USE

SIMPLE OPERATION

1. After unpacking the unit, use a dry cloth to wipe off

the layer of protective oil on each of the electrode.

2. Screw in each electrode on the base of the unit

according to the fitting screw size.

3. Fill a glass with tap water and another with R.O.

purified water.

4. Ensure that the switch is OFF and dip two of the

electrodes in each glass of water.

5. Plug the power plug into the A/C socket than

switch ON the unit.

6. The switch will light up. The untreated water will

gradually boil and solid precipitated; while the R.O.

water will remain crystal clear and cool.

7. Switch OFF the unit once the result is shown.

8. Unplug from the power socket then wipe-dry the

electrodes before storing away.

9. A thin layer of oil applied on the electrodes would

prevent rust developing on it.

SIMPLE MAINTENANCE

1. After several uses, rust may develop on two of the

electrodes. Use sandpaper to remove the rust.

Replacement electrodes are also available from

your supplier.

2. If the fuse were blown due to high TDS in water,

replace the fuse with only 3 Amp fuses.

Always remember to unplug unit from A/C socket

while making maintenance.

ELECTRODES

Unscrew by turning anti-clockwise

for electrode replacements

FUSE HOLDER

Unscrew by turning

anti-clockwise for fuse

replacements.

Use only 3A fuse

ON/OFF SWICH

POWER PLUG

**WARNING

THIS IS A HIGH VOLTAGE DEVICE.

USE WITH EXTRA CAUTION

♦Never leave the unit unattended while it is

connected to the power socket.

♦Never touch electrodes or place them on the

table while the unit is connected to the power

socket.

♦Never leave the unit ON for more than 5

minutes.

♦Do not test water with TDS exceeding 300ppm.

Dilute water with R.O. water first.

♦

Do not use fuse above 3 Amp. This is to

protect the electrical circuit.

** Personal injuries may result if user does not take all

necessary precautions.

** The manufacturer is not responsible for any injuries, which

may result from the use of the product.

MADE IN SINGAPORE

REV-4

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Trans instruments

Trans instruments

Trans instruments RW0025 Manual de usuario

Trans instruments

Trans instruments RBX0010 Manual de usuario

Trans instruments

Trans instruments BP3001 Manual de usuario

Trans instruments

Trans instruments RSA0100 Manual de usuario

Trans instruments

Trans instruments KoiMedicPro Manual de usuario

Trans instruments

Trans instruments Marine Salt Testa Manual de usuario

Trans instruments

Trans instruments AquaCOMBO HM3070 Manual de usuario

Trans instruments

Trans instruments WalkLAB HP 9010 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario