Service ManualTire Pressure Control
II
Before you begin;
Read, Understand and Comply with;
- All Instructions and procedures,
- Companies maintenance intervals, service
routines, installation and diagnostic procedures
- Vehicle manufacturers safety instructions when
working on vehicles,
- Vehicle manufacturers safety and best practice
guidelines not included or described in service
procedure,
- Local safety regulations
During Service;
- Work should only be carried out by trained
personnel
- Use only recommended parts, tools, and
procedures
Upon Completing Service;
- All vehicles should be thoroughly tested and
inspected before being released back into
service
- Ensure the date and service type is noted on
the log sheet located inside of the SCU cover
Safety Notice;
Proper maintenance, service and repair is
importantforthereliableandsafeoperationof Tire
Pressure Control International Ltd.’s [henceforth
known as “TPC International”] TIREBOSS®2
Tire Pressure Control system. Systems that lack
or have poor service and maintenance intervals
have a higher potential for failure with potentially
devastating circumstances. Failure of the control
system could place additional stress on different
systems within the vehicle causing them to be
worn in ways they were not designed for and
creating a dangerous situation. This includes,
but is not limited to, vehicle tires, suspension
system, pneumatic system, electrical system,
etc. The procedures outlined in this guide are
preventive and should be considered as part
of regular maintenance in order to ensure the
health and good operation of the system. Due to
the technical nature of the procedure outlined
in this guide, service should be performed with
extreme caution by trained individuals only.
Disclaimer;
The description and specifications outlined in
this service procedure are current as of the date
indicated on the front cover. TPC International
reserves the right to modify, revise, or discontinue
components that may be used throughout
the procedure without notice to customers.
This right will be reserved for instances where
the technical development team at TPC
International devises a solution it deems to be
more appropriate. Contact TPC International
if you believe a change has been made to your
system (since the date of this procedure). Any
reference to brand names seen in this publication
are made as an example of the recommended
products used and should not be considered as
an endorsement. Alternative’s to these products
can be used as long they are verified to be of a) a
similar chemical composition, b) will not damage
existing hardware, and c) will serve the same
purpose as the recommended product. Only
genuine TIREBOSS®2 replacement parts can
be used in order to maintain warranty. Failure
to use genuine TIREBOSS®2 replacement parts
can also have adverse effects and create critical
issues within the system. Every effort has been
made to ensure the accuracy of the following
procedure, however TPC International makes
no expressed or implied warranty claims based
on the enclosed information. TPC International
will also not be liable for any incidental or indirect
damages or consequential damages incurred by
following this procedure.
Contact TPC International;
Email: info@tireboss.com
Phone Number: +1 (780) 451-4894
Toll Free:
1 (888) 338 3587 [North America]
1 (800) 148 694 [Australia]
0 (800) 443 971 [New Zealand]
0 (8000) 155 612 [United Kingdom]
