TP-Link TL-WR843ND Manual de usuario
7106504640 REV1.0.0
Specifications are subject to change without notice. TP-LINK is a registered
trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product
names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any
means or used to make any derivative such as translation, transformation, or
adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
Copyright © 2014 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.
www.tp-link.com
Wireless AP/Client Router
Quick Installation Guide
TP-LINK TECHNOLOGIES CO., LTD.
English
Українська мова
Қазақша
ქართული
Azərbaycan dili
հայերեն
Русский язык
CONTENTS
English............................................................................... 1
Azərbaycan dili .................................................................11
հայերեն........................................................................... 21
Қазақша .......................................................................... 31
Русский ........................................................................... 41
Українська....................................................................... 51
ქართული........................................................................ 61
1
English
Quick Installation Guide
Package Contents
TL-WR843ND
Note 1. The product model shown in this QIG is “TL-WR843ND”,as
an example.
2. Information for technical support can be found in the last
page.
3 4
Quick Installation Guide
Passive PoE Injector Power Adapter
Resource CD Ethernet Cable
2
English
Here we take the Client Router (WISP) mode for example. If you want to
achieve other applications, please refer to the User Guide on the resource
CD.
1
2
3
Connect your computer to the LAN port of your Router with an
Ethernet Cable.
Plug one end of the provided power adapter into the POWER jack
of the Router, and the other end to a standard electrical wall socket.
Then press the ON/OFF button of the Router.
Please conrm the work mode switch is in WISP mode.
Note 1. You are recommended to place the Router away from
electrical devices, such as ceiling fans, home security
systems, microwave and the base for a cordless phone.
2. If the distance between the outlet and the Router is too long
to supply power, you can set up the hardware connection
with the provided Passive PoE Injector.
Hardware Connection
1
WISP Signal
SOCKET
TL-WR843ND
Notebook
3
English
Note If you are using a MAC/Linux or a windows computer without
a CD drive to run the mini CD, please refer to Appendix 1 for
conguration.
1. Insert the TP-LINK Resource CD into the CD-ROM drive.
2. Select TL-WR843ND and click Easy Setup Assistant.
3. Click START to start the conguration.
Conguration for Windows with Setup Wizard
2
4
English
4. Connect the Router to your computer and power on the Router. Click
NEXT.
5. Turn the work mode switch to WISP. Click NEXT to continue.
6. After confirming the hardware connection and the status of LEDs,
please select the target wireless network you want to join. You can
also set it mannually. Click NEXT.
5
English
7. Enter the password of your wireless network. Sometimes it may be
provided by your WISP. Cllick NEXT.
8. Select the connection type your ISP provides and click NEXT. Here we
take Dynamic IP for example.
9. If you are using a cable modem to access the Internet, you may need
to clone your MAC address. Click NEXT.
6
English
10. Give a unique and easy-to-remember name for your wireless network
(SSID), click NEXT.
11. Please select a security type and set your own password. You can
enter a key of 8-63 characters to replace the default security key.
Then click NEXT.
12. If your client devices support WPS (Wi-Fi Protected Setup), you can
add your device to network by pushing the WPS button. Click FINISH
to complete the setup.
Note You can click WEB management interface for more advanced
settings.
7
English
(for Mac OS X/Linux users or Windows users who can’t run the mini CD)
1. Open your browser and type http://tplinklogin.net in the address
eld, then use the user name admin and password admin to log in.
2. Click Quick Setup in the main menu and click Next.
3. Select the WAN Connection Type provided by your ISP and click
Next. Then the page below will appear. Click Survey.
4. Select the SSID of your target network and click Connect.
Appendix 1: Configuring the Router via Web
Management Page
Otros manuales para TL-WR843ND
2
Tabla de contenidos
Idiomas:
Otros manuales de Enrutador inalámbrico de TP-Link
TP-Link
TP-Link Archer AX6000 Manual de usuario
TP-Link
TP-Link Archer C5400 Manual de usuario
TP-Link
TP-Link TD-W9970 Manual de usuario
TP-Link
TP-Link TL-WR941ND - Wireless Router Manual de usuario
TP-Link
TP-Link TX-VG1530 Manual de usuario
TP-Link
TP-Link Archer AX6000 Manual de usuario
TP-Link
TP-Link Archer CR700 Manual de usuario
TP-Link
TP-Link Archer CR700 Manual de usuario
TP-Link
TP-Link deco M6 Manual de usuario
TP-Link
TP-Link Archer GE800 Manual de usuario
TP-Link
TP-Link TL-WA855RE Manual de usuario
TP-Link
TP-Link TL-WR1042ND Manual de usuario
TP-Link
TP-Link TL-MR3020 Manual de usuario
TP-Link
TP-Link Archer D7 Manual de usuario
TP-Link
TP-Link Archer VX1800v Manual de usuario
TP-Link
TP-Link Archer C54 Manual de usuario
TP-Link
TP-Link ARCHER MR200 Manual de usuario
TP-Link
TP-Link OneMeshT Manual de usuario
TP-Link
TP-Link M7350 Manual de usuario
TP-Link
TP-Link Archer AX73 Manual de usuario
