TP-Link Tapo S200D Manual de usuario
User Guide
Smart Remote Dimmer Switch
© 2023 TP-Link 1910013417 REV1.0.0
Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Tapo Smart Ecosystem······································· 3
Set Up Your Smart Switch·································· 4
Use Your Smart Switch········································ 8
Explore Smart Actions·······································10
How to Create Smart Actions························11
How to Replace the Battery ····························13
How to Reset Your Smart Switch ·················14
Authentication························································15
1
About This Guide
This guide provides a brief introduction to the Smart Switch and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and
descriptions in this guide are only examples and may not reect your actual Tapo experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue Key information appears in blue, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
More Info
• Specications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• The setup videos can be found at https://www.tp-link.com/support/setup-video/#home-smart-switches.
2
Introduction
Control your smart light from multiple locations with more than one dimmer switch. This way, your single-pole dimmer turns into a 3-way or even 4-way
dimmer without rewiring. Ideal for living rooms, halls, and stairways.
• Smart Actions – Control and set multiple smart lights, electronics, and other Tapo smart devices.
• Local Instant Control – Get instant, app-free control over your smart devices with the smart remote dimmer switch.
• Control From Multiple Locations – Control your smart lights from multiple locations with more than one dimmer switch.
• Customized Actions – Single tap, double tap, and rotating options enable you to trigger multiple smart actions.
• Flexible Mounting – Place the smart remote dimmer switch wherever you want, and your lighting control are always within reach.
• Long Battery Life – The battery will last more than one year.
86 Type
128 Type
3
Tapo Smart Ecosystem
Tapo is the easy way to turn your home into a smart home. With the Tapo Hub as a bridge, Tapo Smart Switch works with a wide range of Tapo
accessories. So you can easily control and monitor your home from anywhere.
Smart
Button
Motion
Sensor Temperature &
Humidity
Sensor
Smart
Switch
4
1. Set Up Your Switch
Tap the button in the Tapo app, tap
Switches, and select your model. Follow the
instructions in the Tapo app to complete the
setup.
2. Check the LED & Set Up
Check if the LED blinks. Follow app
instructions to complete the setup.
Note: If LED is not blinking, refer to How to Reset Your
Smart Switch for instructions.
Set Up Your Smart Switch
Watch setup videos at https://www.tp-link.com/support/download/tapo-s200d/
Before You Start
A Tapo Hub is required. Make sure your Tapo
Hub is successfully added via the Tapo app.
OR
5
3. Test Your Switch
a. Press the button to test it in your preferred
location.
b. Refresh the home page on the Tapo app to
conrm its status.
4. Secure Your Wallplate (Optional)
Option 1: Use Adhesives Provided
Stick the included adhesives to the back panel and stick the wallplate to your
preferred location.
x2
OR
x2
6
Option 2: Use Screws (Replace Current Wallplate)
a. Stick the included adhesives to the back panel and stick the
wallplate to your preferred location.
OR
b. Secure the back panel with screws and attach the wallplate to
the back panel.
OR
7
5. Magnetically Attach Button to the Wallplate
a. Attach the non-slip pad to the button (not the wallplate) to
keep the button rmly in place.
b. Magnetically attach the button to the wallplate.
Non-slip
Pad
Non-slip
Pad
OR
8
Home Page Settings
Long press on a card, then you can reorder
cards, tap to remove your device from your
account, share your device, favorite/unfavorite
device, or relocate your device to other Home.
Status Page
You can check all events of you device. Slide
the panel up to check more settings or tap the
gear icon to enter the Settings page.
Use Your Smart Switch
After you successfully set up your hub and smart switch, you will see your devices listed on the home page. With the Tapo app, you can view and
manage your devices anytime, anywhere.
Home Page
This page lists all the devices you've added
and you can view them directly and manage
them easily. Tap the card to enter its Status
page.
Otros manuales para Tapo S200D
1
Tabla de contenidos
Otros manuales de Cambiar de TP-Link
TP-Link
TP-Link TL.SFI OOSD Manual de usuario
TP-Link
TP-Link TL-SF1008D Manual de usuario
TP-Link
TP-Link TL-SF1005D Manual de usuario
TP-Link
TP-Link UH700 Manual de usuario
TP-Link
TP-Link Jetstream Series Manual de usuario
TP-Link
TP-Link JetStream L2+ Manual de usuario
TP-Link
TP-Link TL-SL5428 Manual de usuario
TP-Link
TP-Link TL-POE150S Manual de usuario
TP-Link
TP-Link Jetstream L2 TL-SG5412F Manual de usuario
TP-Link
TP-Link TL-SL5428 Manual de usuario
TP-Link
TP-Link JetStream T1500G-8T Manual de usuario
TP-Link
TP-Link TL-SG3210 Manual de usuario
TP-Link
TP-Link JetStream TL-SL3428 Manual de instrucciones
TP-Link
TP-Link tapo S505D Manual de usuario
TP-Link
TP-Link JetStream TL-SL5428E Manual de instrucciones
TP-Link
TP-Link TL-SG1008P Manual de usuario
TP-Link
TP-Link UH400 Manual de usuario
TP-Link
TP-Link JetStream TL-SG5412F Manual de instrucciones
TP-Link
TP-Link TL-SG108PE Manual de usuario
TP-Link
TP-Link TL-SF1005D Manual de usuario
