TP-Link Archer C7 AC1750 Manual de usuario

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 1 -

Package Contents

The following items should be found in your package:

 Archer C7 AC1750 Wireless Dual Band Gigabit Router

 DC Power Adapter for Archer C7 AC1750 Wireless Dual Band Gigabit Router

 Ethernet Cable

 Quick Installation Guide

 Resource CD for Archer C7 AC1750 Wireless Dual Band Gigabit Router, including:

 This Guide

 Other Helpful Information

 Note:

Make sure that the package contains the above items. If any of the listed items are damaged or

missing, please contact your distributor.

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 2 -

Chapter 1. Introduction

1.1 Overview of the router

The Archer C7 AC1750 Wireless Dual Band Gigabit Router integrates 4-port Switch, Firewall,

NAT-router and Wireless AP. Powered by 3x3 MIMO technology, the AC1750 Wireless Dual Band

Gigabit Router delivers exceptional range and speed, which can fully meet the need of Small

Office/Home Office (SOHO) networks and the users demanding higher networking performance.

Your wireless connections are radio band selectable to avoid interference in your area, and the four

built-in Gigabit ports supply high-speed connection to your wired devices.

Incredible Speed

The Archer C7 AC1750 Wireless Dual Band Gigabit Router provides up to 1750Mbps wireless

connection with other wireless clients. The incredible speed makes it ideal for handling multiple data

streams at the same time, which ensures your network stable and smooth. The performance of this

802.11ac wireless router will give you the unexpected networking experience at speed much faster

than 802.11n. It is also compatible with all IEEE 802.11n, IEEE 802.11a, IEEE 802.11b and IEEE

802.11g products.

Multiple Security Protections

With multiple protection measures, including SSID broadcast control and wireless LAN

64/128/152-bit WEP encryption, Wi-Fi Protected Access (WPA2- PSK, WPA- PSK), as well as

advanced Firewall protections, the Archer C7 AC1750 Wireless Dual Band Gigabit Router

provides complete data privacy.

Flexible Access Control

The Archer C7 AC1750 Wireless Dual Band Gigabit Router provides flexible access control, so that

parents or network administrators can establish restricted access policies for children or staff. It also

supports Virtual Server and DMZ host for Port Triggering, and then the network administrators can

manage and monitor the network in real time with the remote management function.

Simple Installation

Since the router is compatible with virtually all the major operating systems, it is very easy to

manage. Quick Setup Wizard is supported and detailed instructions are provided step by step in

this user guide. Before installing the router, please look through this guide to know all the router’s

functions.

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 3 -

1.2 Conventions

The router or Archer C7 mentioned in this guide stands for Archer C7 AC1750 Wireless Dual Band

Gigabit Router without any explanation.

1.3 Main Features

 Complies with IEEE 802.11ac.

 One 10/100/1000M Auto-Negotiation RJ45 Internet port, four 10/100/1000M Auto-Negotiation

RJ45 Ethernet ports, supporting Auto MDI/MDIX.

 Provides USB ports supporting storage/FTP/Media/Print Server.

 Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security.

 Shares data and Internet access for users, supporting Dynamic IP/ Static IP/ PPPoE/ PPTP/

L2TP/ BigPond Internet access.

 Supports simultaneous 2.4GHz and 5GHz connections for 1750Mbps of total available

bandwidth.

 Supports Virtual Server, Special Application and DMZ host.

 Supports UPnP, Dynamic DNS, Static Routing.

 Provides Automatic-connection and Scheduled Connection on certain time to the Internet.

 Built-in NAT and DHCP server supporting static IP address distributing.

 Supports Parental Control and Access Control.

 Connects Internet on demand and disconnects from the Internet when idle for PPPoE.

 Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access Control

List).

 Supports Flow Statistics.

 Supports IPv6.

 Supports firmware upgrade and Web management.

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 4 -

1.4 Panel Layout

1.4.1 The Front Panel

Figure 1-1 LEDs on the front panel

The router’s LEDs are located on the front panel (View from left to right).

Name Status Indication

Off Power is off.

(Power) On Power is on.

On The router is initializing or maybe has a system error.

Flashing The router is working properly.

(System)

Off The router has a system error.

Off The wireless function is disabled.

(Wireless

2.4GHz) Flashing The wireless function is enabled. The router is working on

2.4GHz radio band.

Off The wireless function is disabled.

(Wireless

5GHz) Flashing The wireless function is enabled. The router is working on

5GHz radio band.

Off There is no device linked to the corresponding port.

On There is a device linked to the corresponding port but there

is no activity.

(Ethernet)

(Internet)

Flashing There is an active device linked to the corresponding port.

Slow

Flash

A wireless device is connecting to the network by WPS

function. This process will last in the first 2 minutes.

On A wireless device has been successfully added to the

network by WPS function.

(WPS)

Quick

Flash

A wireless device failed to be added to the network by WPS

function.

Off No storage device or printer is plugged into the USB port.

(USB on

the rear panel) On A storage device or printer has connected to the USB port.

Table 1-1 The LEDs Description

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 5 -

 Note:

1. After a device is successfully added to the network by WPS function, the WPS LED will keep

on for about 5 minutes and then turn off.

2. The router is set to working concurrently in 2.4GHz and 5GHz by default. If you desire to

choose the working frequency, please go to 4.5 Dual Band Selection.

1.4.2 The Rear Panel

Figure 1-2 Rear Panel sketch

The following parts are located on the rear panel (View from left to right).

 Power: The Power socket is where you will connect the power adapter. Please use the

power adapter provided with this Archer C7 AC1750 Wireless Dual Band Gigabit Router.

 On/Off: The switch for the power.

 Wireless On/Off: The switch for the wireless function.

 USB: The USB port connects to a USB storage device or a USB printer.

 Internet: This port is where you will connect the DSL/cable Modem, or Ethernet.

 Ethernet (1, 2, 3, 4): These ports (1, 2, 3, 4) connect the router to the local PC(s).

 WPS/Reset:

Pressing this button for less than 5 seconds enables the WPS function. If your client devices,

such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this

button to quickly establish a connection between the router and client devices and

automatically configure wireless security for your wireless network.

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 6 -

Pressing this button for more than 5 seconds enables the Reset function. With the router

powered on, press and hold the WPS/Reset button (approximately 8 seconds) until the SYS

LED becomes quick-flash from slow-flash. And then release the button and wait the router

to reboot to its factory default settings.

 Wireless antenna: To receive and transmit the wireless data.

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 7 -

Chapter 2. Connecting the router

2.1 System Requirements

 Broadband Internet Access Service (DSL/Cable/Ethernet)

 One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is

connected directly to the Ethernet)

 PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors

 TCP/IP protocol on each PC

 Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari

2.2 Installation Environment Requirements

 Place the router in a well-ventilated place far from any heater or heating vent

 Avoid direct irradiation of any strong light (such as sunlight)

 Keep at least 2 inches (5 cm) of clear space around the router

 Operating Temperature: 0℃~40℃ (32℉~104℉)

 Operating Humidity: 10%~90%RH, Non-condensing

2.3 Connecting the router

Before installing the router, make sure your PC is connected to the Internet through the

broadband service successfully. If there is any problem, please contact your ISP. After that, please

install the router according to the following steps. Don't forget to pull out the power plug and keep

your hands dry.

1. Power off your modem (if the modem has a backup battery, please remove it too.), and

disconnect your existing router if you have one.

2. Connect the Internet port on your Router to the Modem’s LAN port with an Ethernet cable.

3. Connect your computer to one of the Ethernet ports labeled 1~4 on the Router with an

Ethernet cable.

4. Power on the modem and wait for 2 minutes.

Archer C7 AC1750 Wireless Dual Band Gigabit Router

- 8 -

5. Make sure the Wireless On/Off switch is ON. Then plug the provided power adapter into the

Power jack and the other end to a standard electrical wall socket. Press the On/Off button to

power on the Router. (Before you power on the Router, please make sure your computer is

NOT connected to any other wireless network.)

Figure 2-1 Hardware Installation

Figure 2-2 USB Installation

 Note:

If you want to use the router to share files or printer, plug the USB storage device to the USB port

or connect the printer to the router with a matching cable.

Otros manuales para Archer C7 AC1750

Tabla de contenidos

Otros manuales de Enrutador de red de TP-Link

TP-Link

TP-Link TX-6610 Manual de usuario

TP-Link

TP-Link Archer VR2800 Manual de usuario

TP-Link

TP-Link Archer C58 Manual de usuario

TP-Link

TP-Link TL-WR841HP Manual de usuario

TP-Link

TP-Link TL-WR841N Manual de usuario

TP-Link

TP-Link AC1900 Manual de usuario

TP-Link

TP-Link Archer C7 Manual de usuario

TP-Link

TP-Link Archer C54 Manual de usuario

TP-Link

TP-Link Archer C3200 Manual de usuario

TP-Link

TP-Link TD-8811 Manual de usuario

TP-Link

TP-Link TL-R470T Plus Manual de usuario

TP-Link

TP-Link Archer AXE200 Omni V1 Manual de usuario

TP-Link

TP-Link MR4-WR642G Manual de usuario

TP-Link

TP-Link TL-WR843N Manual de usuario

TP-Link

TP-Link TL-R470T Manual de usuario

TP-Link

TP-Link TL-MR3420 Manual de usuario

TP-Link

TP-Link Archer AX4400 Manual de usuario

TP-Link

TP-Link Archer AX10000 Manual de usuario

TP-Link

TP-Link Archer VR2100v Manual de usuario

TP-Link

TP-Link SafeStream TL-ER6120 Manual de usuario

TP-Link

TP-Link PSM150-DC Manual de usuario

TP-Link

TP-Link TD-8816 Manual de usuario

TP-Link

TP-Link Archer C2300 Manual de usuario

TP-Link

TP-Link TL-WR820N Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario